# Traditional Chinese Messages for the nano editor.
# Copyright (C) 2004, 05 Free Software Foundation, Inc.
# This file is distributed under the same license as the nano package.
#
# Wei-Lun Chao <bluebat@member.fsf.org>, 2004, 2005, 2013.
msgid ""
msgstr ""
"Project-Id-Version: nano 2.3.2pre4\n"
"Report-Msgid-Bugs-To: \n"
"POT-Creation-Date: 2016-02-12 00:24-0500\n"
"PO-Revision-Date: 2013-06-24 23:29+0800\n"
"Last-Translator: Wei-Lun Chao <bluebat@member.fsf.org>\n"
"Language-Team: Chinese (traditional) <zh-l10n@linux.org.tw>\n"
"Language: zh_TW\n"
"X-Bugs: Report translation errors to the Language-Team address.\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Plural-Forms: nplurals=1; plural=0;\n"

#. TRANSLATORS: This is a prompt.
#: src/browser.c:212
msgid "Go To Directory"
msgstr "跳至目錄"

#: src/browser.c:220 src/browser.c:740 src/files.c:1170 src/files.c:2338
#: src/nano.c:1152 src/search.c:204 src/search.c:292 src/search.c:897
#: src/search.c:972 src/text.c:2930 src/text.c:3138
msgid "Cancelled"
msgstr "已取消"

#: src/browser.c:246 src/browser.c:293
#, c-format
msgid "Can't go outside of %s in restricted mode"
msgstr "在限制模式中無法至 %s 外部"

#: src/browser.c:257 src/browser.c:303 src/browser.c:324 src/files.c:1040
#: src/files.c:1048 src/files.c:1842 src/files.c:1969 src/files.c:2014
#: src/files.c:2035 src/files.c:2154 src/files.c:3072 src/files.c:3293
#: src/rcfile.c:595 src/rcfile.c:1434
#, c-format
msgid "Error reading %s: %s"
msgstr "讀取 %s 時發生錯誤: %s"

#: src/browser.c:283
msgid "Can't move up a directory"
msgstr "無法上移一個目錄"

#. TRANSLATORS: Try to keep this at most 7 characters.
#: src/browser.c:617 src/browser.c:625
msgid "(dir)"
msgstr "(目錄)"

#. TRANSLATORS: Try to keep this at most 12 characters.
#: src/browser.c:622
msgid "(parent dir)"
msgstr "(上層目錄)"

#. TRANSLATORS: Try to keep this at most 7 characters.
#. * If necessary, you can leave out the parentheses.
#: src/browser.c:652
msgid "(huge)"
msgstr ""

#. TRANSLATORS: This is the main search prompt.
#: src/browser.c:729 src/search.c:173
msgid "Search"
msgstr "搜尋"

#: src/browser.c:779 src/search.c:468 src/search.c:538
msgid "This is the only occurrence"
msgstr "這是惟一出現之處"

#: src/browser.c:795 src/search.c:366
msgid "Search Wrapped"
msgstr "已從頭搜尋"

#: src/browser.c:845 src/search.c:519
msgid "No current search pattern"
msgstr "沒有符合目前搜尋形式者"

#: src/files.c:50
#, c-format
msgid "Directory '%s' does not exist"
msgstr ""

#: src/files.c:52
#, c-format
msgid "Path '%s': %s"
msgstr ""

#: src/files.c:54
#, fuzzy, c-format
#| msgid "\"%s\" is a directory"
msgid "Path '%s' is not a directory"
msgstr "\"%s\" 是一個目錄"

#: src/files.c:57
#, c-format
msgid "Path '%s' is not accessible"
msgstr ""

#. TRANSLATORS: Try to keep this at most 76 characters.
#: src/files.c:154
msgid "Warning: Modifying a file which is not locked, check directory permission?"
msgstr "警告：正在變更一個未鎖定的檔案，要檢查一下目錄權限嗎？"

#: src/files.c:193
msgid "Couldn't determine my identity for lock file (getpwuid() failed)"
msgstr "無法確認我的身分以用於鎖定檔案 (getpwuid() 失敗)"

#: src/files.c:202
#, fuzzy, c-format
#| msgid "Couldn't determine hosttname for lock file: %s"
msgid "Couldn't determine hostname for lock file: %s"
msgstr "無法確認主機名稱以用於鎖定檔案：%s"

#: src/files.c:223 src/files.c:234 src/files.c:271 src/files.c:281
#, c-format
msgid "Error writing lock file %s: %s"
msgstr "寫入鎖定檔案 %s 時發生錯誤：%s"

#: src/files.c:301
#, c-format
msgid "Error deleting lock file %s: %s"
msgstr "刪除鎖定檔案 %s 時發生錯誤：%s"

#: src/files.c:337
#, fuzzy, c-format
#| msgid "Error opening lockfile %s: %s"
msgid "Error opening lock file %s: %s"
msgstr "開啟鎖定檔案 %s 時發生錯誤：%s"

#: src/files.c:349
#, fuzzy, c-format
#| msgid "Error reading lockfile %s: Not enough data read"
msgid "Error reading lock file %s: Not enough data read"
msgstr "讀取鎖定檔案 %s 時發生錯誤：未讀取足夠的資料"

#. TRANSLATORS: The second %s is the name of the user, the third that of the editor.
#: src/files.c:367
#, c-format
msgid "File %s is being edited (by %s with %s, PID %d); continue?"
msgstr ""

#: src/files.c:422
#, c-format
msgid "Can't insert file from outside of %s"
msgstr "無法插入 %s 外部的檔案"

#: src/files.c:435 src/files.c:1034 src/rcfile.c:588 src/rcfile.c:1384
#: src/rcfile.c:1425
#, c-format
msgid "\"%s\" is a directory"
msgstr "\"%s\" 是一個目錄"

#: src/files.c:437
#, fuzzy, c-format
#| msgid "\"%s\" is a device file"
msgid "\"%s\" is not a normal file"
msgstr "\"%s\" 是一個裝置檔案"

#: src/files.c:562
msgid "No more open file buffers"
msgstr "無多餘檔案緩衝區可開啟"

#: src/files.c:578
#, c-format
msgid "Switched to %s"
msgstr "切換至 %s"

#: src/files.c:580 src/global.c:988 src/winio.c:2012
msgid "New Buffer"
msgstr "新緩衝區"

#: src/files.c:939
#, c-format
msgid "Read %lu line (Converted from DOS and Mac format)"
msgid_plural "Read %lu lines (Converted from DOS and Mac format)"
msgstr[0] "已讀取 %lu 列 (轉檔自 DOS 與 Mac 格式)"

#: src/files.c:944
#, c-format
msgid "Read %lu line (Converted from DOS and Mac format - Warning: No write permission)"
msgid_plural "Read %lu lines (Converted from DOS and Mac format - Warning: No write permission)"
msgstr[0] "已讀取 %lu 列 (轉檔自 DOS 與 Mac 格式 - 警告：沒有寫入權限)"

#: src/files.c:950
#, c-format
msgid "Read %lu line (Converted from Mac format)"
msgid_plural "Read %lu lines (Converted from Mac format)"
msgstr[0] "已讀取 %lu 列 (轉檔自 Mac 格式)"

#: src/files.c:954
#, c-format
msgid "Read %lu line (Converted from Mac format - Warning: No write permission)"
msgid_plural "Read %lu lines (Converted from Mac format - Warning: No write permission)"
msgstr[0] "已讀取 %lu 列 (轉檔自 Mac 格式 - 警告：沒有寫入權限)"

#: src/files.c:960
#, c-format
msgid "Read %lu line (Converted from DOS format)"
msgid_plural "Read %lu lines (Converted from DOS format)"
msgstr[0] "已讀取 %lu 列 (轉檔自 DOS 格式)"

#: src/files.c:964
#, c-format
msgid "Read %lu line (Converted from DOS format - Warning: No write permission)"
msgid_plural "Read %lu lines (Converted from DOS format - Warning: No write permission)"
msgstr[0] "已讀取 %lu 列 (轉檔自 DOS 格式 - 警告：沒有寫入權限)"

#: src/files.c:970
#, c-format
msgid "Read %lu line"
msgid_plural "Read %lu lines"
msgstr[0] "已讀取 %lu 列"

#: src/files.c:973
#, fuzzy, c-format
#| msgid "Read %lu line ( Warning: No write permission)"
#| msgid_plural "Read %lu lines (Warning: No write permission)"
msgid "Read %lu line (Warning: No write permission)"
msgid_plural "Read %lu lines (Warning: No write permission)"
msgstr[0] "已讀取 %lu 列 (警告：沒有寫入權限)"

#: src/files.c:1015 src/files.c:1052
msgid "Reading File"
msgstr "正在讀取檔案"

#: src/files.c:1021
msgid "New File"
msgstr "新檔案"

#: src/files.c:1024
#, c-format
msgid "\"%s\" not found"
msgstr "找不到 \"%s\""

#: src/files.c:1035 src/rcfile.c:589 src/rcfile.c:1385 src/rcfile.c:1426
#, c-format
msgid "\"%s\" is a device file"
msgstr "\"%s\" 是一個裝置檔案"

#: src/files.c:1129
#, c-format
msgid "Command to execute in new buffer [from %s] "
msgstr "在新緩衝區中執行的命令 [從 %s] "

#: src/files.c:1131
#, c-format
msgid "Command to execute [from %s] "
msgstr "執行的命令 [從 %s] "

#: src/files.c:1138
#, c-format
msgid "File to insert into new buffer [from %s] "
msgstr "所要插入新緩衝區的檔案 [從 %s] "

#: src/files.c:1140
#, c-format
msgid "File to insert [from %s] "
msgstr "所要插入的檔案 [從 %s] "

#: src/files.c:1385
msgid "Key invalid in non-multibuffer mode"
msgstr "非多重緩衝區模式中此按鍵無效"

#: src/files.c:1682
msgid "Failed to write backup file, continue saving? (Say N if unsure) "
msgstr "寫入備份檔案時失敗，要繼續儲存？(如果不確定就以 N 表示) "

#: src/files.c:1798
#, c-format
msgid "Can't write outside of %s"
msgstr "無法寫入 %s 外部"

#: src/files.c:1883 src/files.c:1908 src/files.c:1926 src/files.c:1939
#: src/files.c:1950 src/files.c:1979
#, c-format
msgid "Error writing backup file %s: %s"
msgstr "寫入暫存檔案 %s 時發生錯誤：%s"

#: src/files.c:1884 src/nano.c:720
msgid "Too many backup files?"
msgstr "太多備份檔案？"

#: src/files.c:2024 src/text.c:2858 src/text.c:2870 src/text.c:3236
#: src/text.c:3245
#, c-format
msgid "Error writing temp file: %s"
msgstr "寫入暫存檔案 %s 時發生錯誤"

#: src/files.c:2047 src/files.c:2066 src/files.c:2078 src/files.c:2102
#: src/files.c:2119 src/files.c:2129 src/files.c:2162 src/files.c:2169
#, c-format
msgid "Error writing %s: %s"
msgstr "寫入 %s 時發生錯誤: %s"

#: src/files.c:2198
#, c-format
msgid "Wrote %lu line"
msgid_plural "Wrote %lu lines"
msgstr[0] "已寫入 %lu 列"

#: src/files.c:2297
msgid " [DOS Format]"
msgstr " [DOS 格式]"

#: src/files.c:2298
msgid " [Mac Format]"
msgstr " [Mac 格式]"

#: src/files.c:2300
msgid " [Backup]"
msgstr " [備份]"

#: src/files.c:2307
msgid "Prepend Selection to File"
msgstr "前引選擇部分於檔案"

#: src/files.c:2308
msgid "Append Selection to File"
msgstr "附加選擇部分至檔案"

#: src/files.c:2309
msgid "Write Selection to File"
msgstr "寫入選擇部分至檔案"

#: src/files.c:2312
msgid "File Name to Prepend to"
msgstr "要前引於的檔案名稱"

#: src/files.c:2313
msgid "File Name to Append to"
msgstr "要附加至的檔案名稱"

#: src/files.c:2314
msgid "File Name to Write"
msgstr "要寫入的檔案名稱"

#: src/files.c:2347
msgid "Save modified buffer anyway ? "
msgstr ""

#: src/files.c:2455
msgid "File exists, OVERWRITE ? "
msgstr "檔案已存在，要覆寫嗎？"

#: src/files.c:2464
msgid "Save file under DIFFERENT NAME ? "
msgstr "以不同的名稱存檔？"

#: src/files.c:2478
msgid "File was modified since you opened it, continue saving ? "
msgstr "檔案從您開啟它後已被修改，要繼續儲存？"

#: src/files.c:2922
msgid "(more)"
msgstr "(更多)"

#: src/files.c:3014
#, c-format
msgid ""
"\n"
"Press Enter to continue\n"
msgstr ""
"\n"
"按下輸入鍵以繼續\n"

#: src/files.c:3030
#, fuzzy, c-format
#| msgid ""
#| "Unable to create directory %s: %s\n"
#| "It is required for saving/loading search history or cursor position\n"
msgid ""
"Unable to create directory %s: %s\n"
"It is required for saving/loading search history or cursor positions.\n"
msgstr ""
"無法建立目錄 %s：%s\n"
"對於儲存/載入搜尋歷史或游標位置而言，它是必要的\n"

#: src/files.c:3036
#, fuzzy, c-format
#| msgid ""
#| "Path %s is not a directory and needs to be.\n"
#| "Nano will be unable to load or save search or cursor position history\n"
msgid ""
"Path %s is not a directory and needs to be.\n"
"Nano will be unable to load or save search history or cursor positions.\n"
msgstr ""
"路徑 %s 並非卻必須是個目錄。\n"
"Nano 將無法載入或儲存搜尋或游標位置歷史\n"

#: src/files.c:3055
#, c-format
msgid ""
"Detected a legacy nano history file (%s) which I tried to move\n"
"to the preferred location (%s) but encountered an error: %s"
msgstr ""
"偵測到舊的 nano 歷史檔案 (%s)，我已嘗試將它移動\n"
"到偏好的位置 (%s) 但是遇到了錯誤：%s"

#: src/files.c:3059
#, c-format
msgid ""
"Detected a legacy nano history file (%s) which I moved\n"
"to the preferred location (%s)\n"
"(see the nano FAQ about this change)"
msgstr ""
"偵測到舊的 nano 歷史檔案 (%s)，我已將它移動\n"
"到偏好的位置 (%s)\n"
"(參看關於這個變更的 nano FAQ)"

#: src/files.c:3142 src/files.c:3150 src/files.c:3174 src/files.c:3184
#, fuzzy, c-format
#| msgid "Error writing %s: %s"
msgid "Error writing %s: %s\n"
msgstr "寫入 %s 時發生錯誤: %s"

#. TRANSLATORS: Try to keep the next fifteen strings at most 10 characters.
#: src/global.c:480
msgid "Exit"
msgstr "離開"

#: src/global.c:481
msgid "Close"
msgstr "關閉"

#: src/global.c:482
#, fuzzy
#| msgid "UnCut Text"
msgid "Uncut Text"
msgstr "還原剪下文字"

#: src/global.c:484
#, fuzzy
#| msgid "UnJustify"
msgid "Unjustify"
msgstr "還原對齊"

#: src/global.c:490
msgid "Read File"
msgstr "讀檔"

#: src/global.c:491
msgid "Where Is"
msgstr "搜尋"

#: src/global.c:492
msgid "Replace"
msgstr "置換"

#: src/global.c:493
msgid "Go To Line"
msgstr "跳列"

#: src/global.c:494
msgid "Prev Line"
msgstr "上列"

#: src/global.c:495
msgid "Next Line"
msgstr "下列"

#: src/global.c:496
msgid "Prev Page"
msgstr "上頁"

#: src/global.c:497
msgid "Next Page"
msgstr "下頁"

#: src/global.c:499
msgid "Justify"
msgstr "對齊"

#: src/global.c:500
msgid "FullJstify"
msgstr "全部對齊"

#: src/global.c:502
msgid "Refresh"
msgstr "重新顯示"

#. TRANSLATORS: Try to keep this string at most 12 characters.
#: src/global.c:505
msgid "WhereIs Next"
msgstr "下一個位置"

#. TRANSLATORS: The next long series of strings are shortcut descriptions;
#. * they are best kept shorter than 56 characters, but may be longer.
#: src/global.c:512
msgid "Justify the current paragraph"
msgstr "對齊目前段落"

#: src/global.c:514
msgid "Cancel the current function"
msgstr "取消目前功能"

#: src/global.c:515
msgid "Display this help text"
msgstr "顯示這份說明文字"

#: src/global.c:518
msgid "Close the current file buffer / Exit from nano"
msgstr "關閉目前檔案緩衝區 / 離開 nano"

#: src/global.c:520
msgid "Exit from nano"
msgstr "離開 nano"

#: src/global.c:524
msgid "Write the current file to disk"
msgstr "寫入目前檔案至磁碟"

#: src/global.c:526
msgid "Insert another file into the current one"
msgstr "插入它檔至目前檔案"

#: src/global.c:528
msgid "Search for a string or a regular expression"
msgstr "使用字串或正規表示式來搜尋"

#: src/global.c:531
#, fuzzy
#| msgid "Search for a string or a regular expression"
msgid "Search for a string"
msgstr "使用字串或正規表示式來搜尋"

#: src/global.c:533
#, fuzzy
#| msgid "Go to next screen"
msgid "Go one screenful up"
msgstr "跳至後一畫面"

#: src/global.c:534
#, fuzzy
#| msgid "Go to next screen"
msgid "Go one screenful down"
msgstr "跳至後一畫面"

#: src/global.c:536
msgid "Cut the current line and store it in the cutbuffer"
msgstr "剪下目前這列並存至剪貼簿"

#: src/global.c:538
msgid "Uncut from the cutbuffer into the current line"
msgstr "從剪貼簿還原至目前這列"

#: src/global.c:539
msgid "Display the position of the cursor"
msgstr "顯示游標位置"

#: src/global.c:541
msgid "Invoke the spell checker, if available"
msgstr "嘗試呼叫拼字檢查"

#: src/global.c:543
msgid "Replace a string or a regular expression"
msgstr "置換字串或正規表示式"

#: src/global.c:544
msgid "Go to line and column number"
msgstr "跳至指定列與行位置"

#: src/global.c:546
#, fuzzy
#| msgid "Mark text at the cursor position"
msgid "Mark text starting from the cursor position"
msgstr "標記游標所在文字"

#: src/global.c:547
#, fuzzy
#| msgid "Repeat last search"
msgid "Repeat the last search"
msgstr "重覆上次搜尋"

#: src/global.c:549
msgid "Copy the current line and store it in the cutbuffer"
msgstr "剪下目前這列並存至剪貼簿"

#: src/global.c:550
msgid "Indent the current line"
msgstr "縮排目前這列"

#: src/global.c:551
msgid "Unindent the current line"
msgstr "取消目前這列的縮排"

#: src/global.c:552
msgid "Undo the last operation"
msgstr "復原上次的動作"

#: src/global.c:553
msgid "Redo the last undone operation"
msgstr "重做最後一筆已復原作業"

#: src/global.c:555
msgid "Go back one character"
msgstr "向後跳一字元"

#: src/global.c:556
msgid "Go forward one character"
msgstr "向前跳一字元"

#: src/global.c:558
msgid "Go back one word"
msgstr "向後跳一字詞"

#: src/global.c:559
msgid "Go forward one word"
msgstr "向前跳一字詞"

#: src/global.c:561
msgid "Go to previous line"
msgstr "跳至前一列"

#: src/global.c:562
msgid "Go to next line"
msgstr "跳至後一列"

#: src/global.c:563
msgid "Go to beginning of current line"
msgstr "跳至目前列首"

#: src/global.c:564
msgid "Go to end of current line"
msgstr "跳至目前列尾"

#: src/global.c:567
msgid "Go to beginning of paragraph; then of previous paragraph"
msgstr "跳至目前段落開頭；然後是前一段落的開頭"

#: src/global.c:569
msgid "Go just beyond end of paragraph; then of next paragraph"
msgstr "跳至目前段落結尾；然後是後一段落的結尾"

#: src/global.c:571
msgid "Go to the first line of the file"
msgstr "跳至檔案第一列"

#: src/global.c:572
msgid "Go to the last line of the file"
msgstr "跳至檔案最後一列"

#: src/global.c:574
msgid "Go to the matching bracket"
msgstr "跳至對應的括號"

#: src/global.c:576
msgid "Scroll up one line without scrolling the cursor"
msgstr "向上捲動一列但不捲動游標"

#: src/global.c:578
msgid "Scroll down one line without scrolling the cursor"
msgstr "向下捲動一列但不捲動游標"

#: src/global.c:581
msgid "Switch to the previous file buffer"
msgstr "切換至上個檔案緩衝區"

#: src/global.c:582
msgid "Switch to the next file buffer"
msgstr "切換至下個檔案緩衝區"

#: src/global.c:584
msgid "Insert the next keystroke verbatim"
msgstr "插入下個按鍵的原形"

#: src/global.c:585
msgid "Insert a tab at the cursor position"
msgstr "插入跳格字元於游標位置"

#: src/global.c:586
msgid "Insert a newline at the cursor position"
msgstr "插入換列字元於游標位置"

#: src/global.c:587
msgid "Delete the character under the cursor"
msgstr "刪除游標之下的字元"

#: src/global.c:589
msgid "Delete the character to the left of the cursor"
msgstr "刪除游標左側的字元"

#: src/global.c:592
#, fuzzy
#| msgid "Cut from cursor to end of line"
msgid "Cut backward from cursor to word start"
msgstr "從游標剪下至列尾"

#: src/global.c:594
#, fuzzy
#| msgid "Cut from cursor to end of line"
msgid "Cut forward from cursor to next word start"
msgstr "從游標剪下至列尾"

#: src/global.c:596
msgid "Cut from the cursor position to the end of the file"
msgstr "從游標位置剪下至檔案結尾"

#: src/global.c:599
msgid "Justify the entire file"
msgstr "對齊整個檔案"

#: src/global.c:603
msgid "Count the number of words, lines, and characters"
msgstr "計算字數、列數與字元數"

#: src/global.c:606
msgid "Refresh (redraw) the current screen"
msgstr "重新顯示目前畫面"

#: src/global.c:608
#, fuzzy
#| msgid "Suspend the editor (if suspend is enabled)"
msgid "Suspend the editor (if suspension is enabled)"
msgstr "懸置編輯器 (如果懸置已啟用)"

#: src/global.c:610
msgid "Save file without prompting"
msgstr ""

#: src/global.c:611
msgid "Search next occurrence backward"
msgstr ""

#: src/global.c:612
msgid "Search next occurrence forward"
msgstr ""

#: src/global.c:614
msgid "Toggle the case sensitivity of the search"
msgstr "切換搜尋的大小寫符合"

#: src/global.c:616
msgid "Reverse the direction of the search"
msgstr "倒轉搜尋方向"

#: src/global.c:620
msgid "Toggle the use of regular expressions"
msgstr "切換使用正規表示式"

#: src/global.c:624
msgid "Recall the previous search/replace string"
msgstr "重用上次搜尋/置換字串"

#: src/global.c:626
msgid "Recall the next search/replace string"
msgstr "重用下次搜尋/置換字串"

#: src/global.c:629
msgid "Go to file browser"
msgstr "呼叫檔案選單"

#: src/global.c:632
msgid "Toggle the use of DOS format"
msgstr "切換使用 DOS 格式"

#: src/global.c:633
msgid "Toggle the use of Mac format"
msgstr "切換使用 Mac 格式"

#: src/global.c:634
msgid "Toggle appending"
msgstr "切換附加"

#: src/global.c:635
msgid "Toggle prepending"
msgstr "切換前置"

#: src/global.c:636
msgid "Toggle backing up of the original file"
msgstr "切換備份既有檔案"

#: src/global.c:637
msgid "Execute external command"
msgstr "執行外部命令"

#: src/global.c:639
msgid "Close buffer without saving it"
msgstr ""

#: src/global.c:641
msgid "Toggle the use of a new buffer"
msgstr "切換使用新緩衝區"

#: src/global.c:644
msgid "Exit from the file browser"
msgstr "從檔案選單離開"

#: src/global.c:645
msgid "Go to the first file in the list"
msgstr "跳至列表中的第一個檔案"

#: src/global.c:646
msgid "Go to the last file in the list"
msgstr "跳至列表中的最後一個檔案"

#: src/global.c:647
msgid "Go to the previous file in the list"
msgstr "跳至列表中的上一個檔案"

#: src/global.c:648
msgid "Go to the next file in the list"
msgstr "跳至列表中的下一個檔案"

#: src/global.c:649
msgid "Go to directory"
msgstr "跳至目錄"

#: src/global.c:652
#, fuzzy
#| msgid "Invoke the spell checker, if available"
msgid "Invoke the linter, if available"
msgstr "嘗試呼叫拼字檢查"

#: src/global.c:653
#, fuzzy
#| msgid "Go to previous line"
msgid "Go to previous linter msg"
msgstr "跳至前一列"

#: src/global.c:654
#, fuzzy
#| msgid "Go to next line"
msgid "Go to next linter msg"
msgstr "跳至後一列"

#: src/global.c:656
#, fuzzy
#| msgid "Invoke the spell checker, if available"
msgid "Invoke formatter, if available"
msgstr "嘗試呼叫拼字檢查"

#. TRANSLATORS: Try to keep the following strings at most 10 characters.
#: src/global.c:671
msgid "Get Help"
msgstr "求助"

#: src/global.c:674 src/prompt.c:885
msgid "Cancel"
msgstr "取消"

#: src/global.c:687
#, fuzzy
#| msgid "WriteOut"
msgid "Write Out"
msgstr "寫入"

#: src/global.c:723
msgid "Go To Dir"
msgstr "跳至目錄"

#: src/global.c:738
msgid "Cut Text"
msgstr "剪下文字"

#: src/global.c:753
msgid "To Spell"
msgstr "拼字檢查"

#: src/global.c:757
#, fuzzy
#| msgid "Go To Line"
msgid "To Linter"
msgstr "跳列"

#: src/global.c:760
#, fuzzy
#| msgid "DOS Format"
msgid "Formatter"
msgstr "DOS 格式"

#: src/global.c:767
msgid "Case Sens"
msgstr "依大小寫"

#: src/global.c:772
msgid "Regexp"
msgstr "正規表示式"

#: src/global.c:777
msgid "Backwards"
msgstr "向後搜尋"

#: src/global.c:784
msgid "No Replace"
msgstr "不置換"

#: src/global.c:792
msgid "Cur Pos"
msgstr "游標位置"

#: src/global.c:807
msgid "First Line"
msgstr "首列"

#: src/global.c:809
msgid "Last Line"
msgstr "尾列"

#: src/global.c:816
#, fuzzy
#| msgid "Not a bracket"
msgid "To Bracket"
msgstr "並非一個括號"

#: src/global.c:819
msgid "Mark Text"
msgstr "標記文字"

#: src/global.c:822
msgid "Copy Text"
msgstr "複製文字"

#: src/global.c:825
msgid "Indent Text"
msgstr "縮排文字"

#: src/global.c:827
msgid "Unindent Text"
msgstr "取消縮排文字"

#: src/global.c:830
msgid "Undo"
msgstr "復原"

#: src/global.c:832
msgid "Redo"
msgstr "重做"

#: src/global.c:836 src/global.c:842
msgid "Back"
msgstr "向後"

#: src/global.c:838 src/global.c:844
msgid "Forward"
msgstr "向前"

#: src/global.c:849
msgid "Prev Word"
msgstr "前一個字"

#: src/global.c:851
msgid "Next Word"
msgstr "後一個字"

#: src/global.c:855
msgid "Home"
msgstr "頂端"

#: src/global.c:857
msgid "End"
msgstr "尾端"

#: src/global.c:866
msgid "Beg of Par"
msgstr "段落開頭"

#: src/global.c:868
msgid "End of Par"
msgstr "段落結尾"

#: src/global.c:873
msgid "Scroll Up"
msgstr "向上捲動"

#: src/global.c:875
msgid "Scroll Down"
msgstr "向下捲動"

#: src/global.c:880
#, fuzzy
#| msgid "Previous File"
msgid "Prev File"
msgstr "上個檔案"

#: src/global.c:882
msgid "Next File"
msgstr "下個檔案"

#: src/global.c:891
#, fuzzy
#| msgid "Verbatim Input"
msgid "Verbatim"
msgstr "原形輸入"

#: src/global.c:894
msgid "Tab"
msgstr "跳格鍵"

#: src/global.c:896
msgid "Enter"
msgstr "輸入鍵"

#: src/global.c:899
msgid "Delete"
msgstr "刪除鍵"

#: src/global.c:901
msgid "Backspace"
msgstr "退格鍵"

#. TRANSLATORS: The next two strings refer to cutting words.
#: src/global.c:912
#, fuzzy
#| msgid "Cut Text"
msgid "Cut Left"
msgstr "剪下文字"

#: src/global.c:914
msgid "Cut Right"
msgstr ""

#: src/global.c:916
msgid "CutTillEnd"
msgstr "刪至末端"

#: src/global.c:926
msgid "Word Count"
msgstr "計算字數"

#: src/global.c:933
msgid "Suspend"
msgstr "懸置"

#: src/global.c:937
msgid "Save"
msgstr ""

#: src/global.c:940
#, fuzzy
#| msgid "Previous File"
msgid "Previous"
msgstr "上個檔案"

#: src/global.c:942
#, fuzzy
#| msgid "Next Page"
msgid "Next"
msgstr "下頁"

#: src/global.c:948
msgid "PrevHstory"
msgstr "上一筆記錄"

#: src/global.c:951
msgid "NextHstory"
msgstr "下一筆記錄"

#: src/global.c:955
msgid "Go To Text"
msgstr "跳至文字"

#: src/global.c:959
msgid "DOS Format"
msgstr "DOS 格式"

#: src/global.c:961
msgid "Mac Format"
msgstr "Mac 格式"

#: src/global.c:969
msgid "Append"
msgstr "附加"

#: src/global.c:971
msgid "Prepend"
msgstr "前引"

#: src/global.c:974
msgid "Backup File"
msgstr "備份檔案"

#: src/global.c:981
msgid "Execute Command"
msgstr "執行命令"

#: src/global.c:996
msgid "To Files"
msgstr "檔案選單"

#: src/global.c:1004
msgid "First File"
msgstr "第一個檔案"

#: src/global.c:1006
msgid "Last File"
msgstr "最後的檔案"

#: src/global.c:1010
msgid "Discard buffer"
msgstr ""

#. TRANSLATORS: Try to keep the next two strings at most 20 characters.
#: src/global.c:1020
#, fuzzy
#| msgid "Prev Line"
msgid "Prev Lint Msg"
msgstr "上列"

#: src/global.c:1022
#, fuzzy
#| msgid "Next Line"
msgid "Next Lint Msg"
msgstr "下列"

#. TRANSLATORS: The next seventeen strings are toggle descriptions;
#. * they are best kept shorter than 40 characters, but may be longer.
#: src/global.c:1285
msgid "Help mode"
msgstr "輔助模式"

#: src/global.c:1287
msgid "Constant cursor position display"
msgstr "持續顯示游標位置"

#: src/global.c:1289
msgid "Use of one more line for editing"
msgstr "編輯時多使用一列"

#: src/global.c:1291
msgid "Smooth scrolling"
msgstr "平滑式捲動畫面"

#: src/global.c:1293
#, fuzzy
#| msgid "Don't wrap long lines"
msgid "Soft wrapping of overlong lines"
msgstr "不要自動換列"

#: src/global.c:1295
msgid "Whitespace display"
msgstr "顯示空格"

#: src/global.c:1297
msgid "Color syntax highlighting"
msgstr "語法色彩標示"

#: src/global.c:1299
msgid "Smart home key"
msgstr "智慧型 HOME 按鍵"

#: src/global.c:1301
msgid "Auto indent"
msgstr "自動縮排"

#: src/global.c:1303
msgid "Cut to end"
msgstr "剪下至列尾"

#: src/global.c:1305
#, fuzzy
#| msgid "Don't wrap long lines"
msgid "Hard wrapping of overlong lines"
msgstr "不要自動換列"

#: src/global.c:1307
msgid "Conversion of typed tabs to spaces"
msgstr "已輸入跳格符號至空白的轉換"

#: src/global.c:1309
msgid "Backup files"
msgstr "備份檔案"

#: src/global.c:1311
msgid "Reading file into separate buffer"
msgstr ""

#: src/global.c:1313
msgid "Mouse support"
msgstr "滑鼠支援"

#: src/global.c:1315
msgid "No conversion from DOS/Mac format"
msgstr "不從 DOS/Mac 格式轉檔"

#: src/global.c:1317
msgid "Suspension"
msgstr "懸置"

#: src/help.c:211
msgid ""
"Search Command Help Text\n"
"\n"
" Enter the words or characters you would like to search for, and then press Enter.  If there is a match for the text you entered, the screen will be updated to the location of the nearest match for the search string.\n"
"\n"
" The previous search string will be shown in brackets after the search prompt.  Hitting Enter without entering any text will perform the previous search.  "
msgstr ""
"搜尋命令輔助說明\n"
"\n"
" 首先輸入您想要搜尋的字串或字元，然後按下輸入鍵 (Enter)。如果存在著 符合您所輸入的文字，畫面就會更新到最合乎搜尋字串的位置。\n"
"\n"
" 前次搜尋的字串將會顯示在 搜尋: 提示符號後面的括號中。不輸入任何文字 而直接按下輸入鍵則會履行前次的搜尋。"

#: src/help.c:220
msgid ""
"If you have selected text with the mark and then search to replace, only matches in the selected text will be replaced.\n"
"\n"
" The following function keys are available in Search mode:\n"
"\n"
msgstr ""
"如果您已經用標記選擇了一段文字 並進行搜尋替換，就只有在選擇文字中符合者將會被替換。\n"
"\n"
" 以下的功能鍵可用於搜尋模式:\n"
"\n"

#: src/help.c:226
msgid ""
"Go To Line Help Text\n"
"\n"
" Enter the line number that you wish to go to and hit Enter.  If there are fewer lines of text than the number you entered, you will be brought to the last line of the file.\n"
"\n"
" The following function keys are available in Go To Line mode:\n"
"\n"
msgstr ""
"跳列輔助說明\n"
"\n"
" 首先輸入您想去的列數編號並按下輸入鍵 (Enter)。如果文章中的列數比您所輸 入要少，您將會被帶至檔案的最後一列。\n"
"\n"
" 以下的功能鍵可用於跳列模式: \n"
"\n"

#: src/help.c:235
msgid ""
"Insert File Help Text\n"
"\n"
" Type in the name of a file to be inserted into the current file buffer at the current cursor location.\n"
"\n"
" If you have compiled nano with multiple file buffer support, and enable multiple file buffers with the -F or --multibuffer command line flags, the Meta-F toggle, or a nanorc file, inserting a file will cause it to be loaded into a separate buffer (use Meta-< and > to switch between file buffers).  "
msgstr ""
"插入檔案輔助說明\n"
"\n"
" 先把檔案的名稱鍵入，它將會插入在目前緩衝區的游標所在之處。\n"
"\n"
" 如果您所編譯的 nano 支援多重檔案緩衝區，並且將此功能以命令列旗標 -F 或 --multibuffer、Meta-F 開關，或者 nanorc 檔案來啟動的話，所插入的檔案 將會被載入另外的緩衝區中 (利用 Meta-< 和 > 在檔案緩衝區間切換)。 "

#: src/help.c:244
msgid ""
"If you need another blank buffer, do not enter any filename, or type in a nonexistent filename at the prompt and press Enter.\n"
"\n"
" The following function keys are available in Insert File mode:\n"
"\n"
msgstr ""
"如果您需要另一個空的緩衝區，那就不要輸入任何檔名，或是在提示符號後鍵 入一個不存在的檔名，然後按下輸入鍵。\n"
"\n"
" 以下的功能鍵可用於插入檔案模式:\n"
"\n"

#: src/help.c:250
msgid ""
"Write File Help Text\n"
"\n"
" Type the name that you wish to save the current file as and press Enter to save the file.\n"
"\n"
" If you have selected text with the mark, you will be prompted to save only the selected portion to a separate file.  To reduce the chance of overwriting the current file with just a portion of it, the current filename is not the default in this mode.\n"
"\n"
" The following function keys are available in Write File mode:\n"
"\n"
msgstr ""
"寫入檔案輔助說明\n"
"\n"
" 先鍵入您想要以此來儲存目前檔案的名稱，並按下輸入鍵來儲存檔案。\n"
"\n"
" 如果已經用標記選擇了文字，那麼您將會被提示，只儲存標記部分到另外的檔 案。為了降低目前檔案只被其中部分覆寫的機會，在此模式下，目前的檔名不會 成為預設值。\n"
"\n"
" 以下的功能鍵可用於寫入檔案模式: \n"
"\n"

#: src/help.c:264
msgid ""
"File Browser Help Text\n"
"\n"
" The file browser is used to visually browse the directory structure to select a file for reading or writing.  You may use the arrow keys or Page Up/Down to browse through the files, and S or Enter to choose the selected file or enter the selected directory.  To move up one level, select the directory called \"..\" at the top of the file list.\n"
"\n"
" The following function keys are available in the file browser:\n"
"\n"
msgstr ""
"檔案選單輔助說明\n"
"\n"
" 檔案選單是用來視覺化瀏覽目錄結構，以選取要讀出或寫入的檔案。您可以 使用上下左右鍵或上頁/下頁來瀏覽，並用 S 或輸入鍵來選取所要的檔案或者 進入所選的目錄。要跳到上層時，選擇在檔案列表頂端名為 \"..\" 的目錄。\n"
"\n"
" 以下的功能鍵可用於檔案選單: \n"
"\n"

#: src/help.c:277
msgid ""
"Browser Search Command Help Text\n"
"\n"
" Enter the words or characters you would like to search for, and then press Enter.  If there is a match for the text you entered, the screen will be updated to the location of the nearest match for the search string.\n"
"\n"
" The previous search string will be shown in brackets after the search prompt.  Hitting Enter without entering any text will perform the previous search.\n"
"\n"
msgstr ""
"搜尋命令輔助說明\n"
"\n"
" 首先輸入您想要搜尋的字串或字元，然後按下輸入鍵 (Enter)。如果存在著 符合您所輸入的文字，畫面就會更新到最合乎搜尋字串的位置。\n"
"\n"
" 前次搜尋的字串將會顯示在 搜尋: 提示符號後面的括號中。不輸入任何文字 而直接按下輸入鍵則會履行前次的搜尋。\n"
"\n"

#: src/help.c:286
msgid ""
" The following function keys are available in Browser Search mode:\n"
"\n"
msgstr ""
" 下列功能鍵可用於瀏覽器搜尋模式：\n"
"\n"

#: src/help.c:290
msgid ""
"Browser Go To Directory Help Text\n"
"\n"
" Enter the name of the directory you would like to browse to.\n"
"\n"
" If tab completion has not been disabled, you can use the Tab key to (attempt to) automatically complete the directory name.\n"
"\n"
" The following function keys are available in Browser Go To Directory mode:\n"
"\n"
msgstr ""
"跳至目錄輔助說明\n"
"\n"
" 先輸入您想要瀏覽的目錄名稱。\n"
"\n"
" 如果跳格補正的功能沒有被關閉，您可以利用跳格鍵 (TAB) 去 (嘗試) 自動 補正目錄名稱。\n"
"\n"
" 以下的功能鍵可用於跳至目錄模式: \n"
"\n"

#: src/help.c:303
msgid ""
"Spell Check Help Text\n"
"\n"
" The spell checker checks the spelling of all text in the current file.  When an unknown word is encountered, it is highlighted and a replacement can be edited.  It will then prompt to replace every instance of the given misspelled word in the current file, or, if you have selected text with the mark, in the selected text.\n"
"\n"
" The following function keys are available in Spell Check mode:\n"
"\n"
msgstr ""
"拼字檢查輔助說明\n"
"\n"
" 拼字檢查程式會檢查目前檔案中所有文字的拼法。當遇到一個未知的字，它會 被標記起來，並讓您編輯替代文字。對於目前檔案中每一個拼錯的字，都會顯示 置換的提示；或者，如果已經用標記選擇了文字的話，那就只作用於選取的文字 之中。\n"
"\n"
" 以下的功能鍵可用於拼字檢查模式: \n"
"\n"

#: src/help.c:318
msgid ""
"Execute Command Help Text\n"
"\n"
" This mode allows you to insert the output of a command run by the shell into the current buffer (or a new buffer in multiple file buffer mode).  If you need another blank buffer, do not enter any command.\n"
"\n"
" The following function keys are available in Execute Command mode:\n"
"\n"
msgstr ""
"執行命令輔助說明\n"
"\n"
" 本選單允許您將 shell 執行的命令輸出結果，插入目前的緩衝區 (或是多重緩衝 區模式下的新緩衝區)。如果您需要另一個空白緩衝區，就不要輸入任何命令。\n"
"\n"
" 以下的功能鍵可用於執行命令模式: \n"
"\n"

#: src/help.c:331
msgid ""
"Main nano help text\n"
"\n"
" The nano editor is designed to emulate the functionality and ease-of-use of the UW Pico text editor.  There are four main sections of the editor.  The top line shows the program version, the current filename being edited, and whether or not the file has been modified.  Next is the main editor window showing the file being edited.  The status line is the third line from the bottom and shows important messages.  "
msgstr ""
"nano 輔助說明\n"
"\n"
" nano 編輯器是設計來在功能性及易用性方面，模仿華盛頓大學的 Pico 文字 編輯器。它含有四個主要部分:頂列顯示程式版本、目前被編輯的檔案名稱， 以及是否這檔案已經更動過。接著是主要編輯區，顯示正在編輯的檔案。狀態 列位於倒數第三列，用來顯示重要的訊息。\n"
"\n"
" "

#: src/help.c:341
msgid ""
"The bottom two lines show the most commonly used shortcuts in the editor.\n"
"\n"
" The notation for shortcuts is as follows: Control-key sequences are notated with a caret (^) symbol and can be entered either by using the Control (Ctrl) key or pressing the Escape (Esc) key twice.  Escape-key sequences are notated with the Meta (M-) symbol and can be entered using either the Esc, Alt, or Meta key depending on your keyboard setup.  "
msgstr ""
"底部的兩列顯示編輯器中最常用 到的快捷鍵。\n"
"快捷鍵的記號定義如下：控制鍵組 (Control-key) 序列是以一個 \"帽子\" (caret, ^) 符號來表示，它可以藉由控制鍵 (Ctrl) 或是按兩次脫離鍵 (Esc) 來輸入。脫離鍵組 (Escape-key) 序列是以 \"中介\" (Meta, M) 符號表示，它 可以依照您的鍵盤設定，利用 Esc，Alt 或 Meta 來輸入。"

#: src/help.c:350
msgid ""
"Also, pressing Esc twice and then typing a three-digit decimal number from 000 to 255 will enter the character with the corresponding value.  The following keystrokes are available in the main editor window.  Alternative keys are shown in parentheses:\n"
"\n"
msgstr ""
"另外，按 Esc 兩次 之後再鍵入從 000 到 255 之間的三位數字，則會輸入該 ASCII 碼對應的字 元。下列按鍵組合可用於主要編輯區，替代按鍵則顯示於括弧內:\n"
"\n"

#: src/help.c:382 src/help.c:459
msgid "enable/disable"
msgstr "開啟/關閉"

#: src/nano.c:589
#, fuzzy
#| msgid "Key invalid in view mode"
msgid "Key is invalid in view mode"
msgstr "觀看模式中此按鍵無效"

#: src/nano.c:595
#, fuzzy
#| msgid "Can't go outside of %s in restricted mode"
msgid "This function is disabled in restricted mode"
msgstr "在限制模式中無法至 %s 外部"

#: src/nano.c:603
msgid "Help is not available"
msgstr ""

#: src/nano.c:714
#, c-format
msgid ""
"\n"
"Buffer written to %s\n"
msgstr ""
"\n"
"緩衝區已寫入 %s\n"

#: src/nano.c:716
#, c-format
msgid ""
"\n"
"Buffer not written to %s: %s\n"
msgstr ""
"\n"
"緩衝區未寫入至 %s: %s\n"

#: src/nano.c:719
#, c-format
msgid ""
"\n"
"Buffer not written: %s\n"
msgstr ""
"\n"
"緩衝區未寫入: %s\n"

#: src/nano.c:744
msgid "Window size is too small for nano...\n"
msgstr "視窗尺寸對 nano 來說太小了…\n"

#: src/nano.c:837
#, c-format
msgid ""
"Usage: nano [OPTIONS] [[+LINE,COLUMN] FILE]...\n"
"\n"
msgstr ""
"用法: nano [選項] [[+列數,行數] 檔案名稱]…\n"
"\n"

#: src/nano.c:840
#, c-format
msgid "Option\t\tGNU long option\t\tMeaning\n"
msgstr "選項\t\tGNU 長選項\t\t意義\n"

#: src/nano.c:842
#, c-format
msgid "Option\t\tMeaning\n"
msgstr "選項\t\t意義\n"

#: src/nano.c:845
msgid "+LINE,COLUMN"
msgstr "+列數,行數"

#. TRANSLATORS: The next forty or so strings are option descriptions
#. * for the --help output.  Try to keep them at most 40 characters.
#: src/nano.c:848
msgid "Start at line LINE, column COLUMN"
msgstr "從所指列數與行數開始"

#: src/nano.c:850
msgid "Enable smart home key"
msgstr "開啟智慧型 HOME 按鍵功能"

#: src/nano.c:852
msgid "Save backups of existing files"
msgstr "儲存既有檔案的備份"

#: src/nano.c:853
msgid "-C <dir>"
msgstr "-C <目錄>"

#: src/nano.c:853
msgid "--backupdir=<dir>"
msgstr "--backupdir=<目錄>"

#: src/nano.c:854
msgid "Directory for saving unique backup files"
msgstr "用以儲存獨一備份檔案的目錄"

#: src/nano.c:857
msgid "Use bold instead of reverse video text"
msgstr "使用粗體以代替反白顯示文字"

#: src/nano.c:859
msgid "Convert typed tabs to spaces"
msgstr "將已輸入的跳格符號轉換為空白"

#: src/nano.c:864
msgid "Read a file into a new buffer by default"
msgstr ""

#: src/nano.c:867
msgid "Use (vim-style) lock files"
msgstr "使用 (vim 形式) 鎖定檔案"

#: src/nano.c:872
msgid "Log & read search/replace string history"
msgstr "記錄與讀取 搜尋/置換 的歷史字串"

#: src/nano.c:876
msgid "Don't look at nanorc files"
msgstr "不要參考 nanorc 檔案"

#: src/nano.c:879
msgid "Fix numeric keypad key confusion problem"
msgstr "修正數字鍵區按鍵混淆問題"

#: src/nano.c:881
msgid "Don't add newlines to the ends of files"
msgstr "不要將換列加到檔案末端"

#: src/nano.c:884
msgid "Don't convert files from DOS/Mac format"
msgstr "不要從 DOS/Mac 格式轉檔"

#: src/nano.c:886
msgid "Use one more line for editing"
msgstr "編輯時多使用一列"

#: src/nano.c:890
msgid "Log & read location of cursor position"
msgstr "記錄 & 讀取游標所在位置"

#: src/nano.c:893
msgid "-Q <str>"
msgstr "-Q <字串>"

#: src/nano.c:893
msgid "--quotestr=<str>"
msgstr "--quotestr=<字串>"

#: src/nano.c:893
msgid "Quoting string"
msgstr "引用代表字串"

#: src/nano.c:896
msgid "Restricted mode"
msgstr "限制模式"

#: src/nano.c:898
msgid "Scroll by line instead of half-screen"
msgstr "逐列捲動以代替半個畫面"

#: src/nano.c:900
msgid "-T <#cols>"
msgstr "-T <#行數>"

#: src/nano.c:900
msgid "--tabsize=<#cols>"
msgstr "--tabsize=<#行數>"

#: src/nano.c:901
msgid "Set width of a tab to #cols columns"
msgstr "設定跳格寬度為 #行數"

#: src/nano.c:903
msgid "Do quick statusbar blanking"
msgstr "狀態列快速閃動"

#: src/nano.c:905
msgid "Print version information and exit"
msgstr "顯示版本資訊並離開"

#: src/nano.c:908
msgid "Detect word boundaries more accurately"
msgstr "更正確地偵測單字邊界"

#: src/nano.c:912
msgid "-Y <str>"
msgstr "-Y <字串>"

#: src/nano.c:912
msgid "--syntax=<str>"
msgstr "--syntax=<字串>"

#: src/nano.c:913
msgid "Syntax definition to use for coloring"
msgstr "用於顏色的語法定義"

#: src/nano.c:915
msgid "Constantly show cursor position"
msgstr "持續顯示游標位置"

#: src/nano.c:917
msgid "Fix Backspace/Delete confusion problem"
msgstr "修正 退格鍵/刪除鍵 混淆問題"

#: src/nano.c:918
#, fuzzy
#| msgid "Display this help text"
msgid "Show this help text and exit"
msgstr "顯示這份說明文字"

#: src/nano.c:920
msgid "Automatically indent new lines"
msgstr "自動縮排新列"

#: src/nano.c:921
msgid "Cut from cursor to end of line"
msgstr "從游標剪下至列尾"

#: src/nano.c:924
msgid "Enable the use of the mouse"
msgstr "開啟滑鼠功能"

#: src/nano.c:926
msgid "Do not read the file (only write it)"
msgstr ""

#: src/nano.c:928
msgid "-o <dir>"
msgstr "-o <目錄>"

#: src/nano.c:928
msgid "--operatingdir=<dir>"
msgstr "--operatingdir=<目錄>"

#: src/nano.c:929
msgid "Set operating directory"
msgstr "設定操作目錄"

#: src/nano.c:931
msgid "Preserve XON (^Q) and XOFF (^S) keys"
msgstr "保留 XON (^Q) 和 XOFF (^S) 按鍵"

#: src/nano.c:935
msgid "Silently ignore startup issues like rc file errors"
msgstr "默默地忽略像是 rc 檔案錯誤之類的啟動問題"

#: src/nano.c:938
msgid "-r <#cols>"
msgstr "-r <#行數>"

#: src/nano.c:938
msgid "--fill=<#cols>"
msgstr "--fill=<#行數>"

#: src/nano.c:939
#, fuzzy
#| msgid "Set wrapping point at column #cols"
msgid "Set hard-wrapping point at column #cols"
msgstr "設定換列點為 #行數"

#: src/nano.c:943
msgid "-s <prog>"
msgstr "-s <程式>"

#: src/nano.c:943
msgid "--speller=<prog>"
msgstr "--speller=<程式>"

#: src/nano.c:944
msgid "Enable alternate speller"
msgstr "啟用替代的拼字檢查程式"

#: src/nano.c:946
msgid "Auto save on exit, don't prompt"
msgstr "離開時自動儲存，不要提示"

#: src/nano.c:948
msgid "Save a file by default in Unix format"
msgstr ""

#: src/nano.c:950
msgid "View mode (read-only)"
msgstr "觀看模式 (唯讀)"

#: src/nano.c:952
#, fuzzy
#| msgid "Don't wrap long lines"
msgid "Don't hard-wrap long lines"
msgstr "不要自動換列"

#: src/nano.c:954
msgid "Don't show the two help lines"
msgstr "不要顯示兩說明列"

#: src/nano.c:956
msgid "Enable suspension"
msgstr "開啟懸置功能"

#: src/nano.c:958
msgid "Enable soft line wrapping"
msgstr "開啟長列換列"

#: src/nano.c:967
#, fuzzy, c-format
#| msgid " GNU nano version %s (compiled %s, %s)\n"
msgid " GNU nano, version %s\n"
msgstr " GNU nano 版本 %s (編譯於 %s, %s)\n"

#: src/nano.c:970
#, c-format
msgid " Email: nano@nano-editor.org\tWeb: http://www.nano-editor.org/"
msgstr " 電子郵件: nano@nano-editor.org\t\t網頁: http://www.nano-editor.org/"

#: src/nano.c:971
#, c-format
msgid ""
"\n"
" Compiled options:"
msgstr ""
"\n"
" 編譯選項:"

#: src/nano.c:1105
msgid "No file name"
msgstr ""

#: src/nano.c:1140
msgid "Save modified buffer (ANSWERING \"No\" WILL DESTROY CHANGES) ? "
msgstr "儲存更動過的緩衝區嗎 (回答 \"No\" 會撤銷修改)？"

#: src/nano.c:1200
msgid "Couldn't reopen stdin from keyboard, sorry\n"
msgstr "無法重新開啟來自鍵盤的標準輸入，抱歉\n"

#: src/nano.c:1224
#, c-format
msgid "Reading from stdin, ^C to abort\n"
msgstr "讀取自標準輸入，^C 以放棄\n"

#: src/nano.c:1288
msgid "Received SIGHUP or SIGTERM\n"
msgstr "接收到 SIGHUP 或 SIGTERM\n"

#: src/nano.c:1304
#, c-format
msgid "Use \"fg\" to return to nano.\n"
msgstr "利用 \"fg\" 來回到 nano。\n"

#: src/nano.c:1326
msgid "Suspension is not enabled"
msgstr ""

#: src/nano.c:1480
msgid "enabled"
msgstr "開啟"

#: src/nano.c:1480
msgid "disabled"
msgstr "關閉"

#: src/nano.c:1639 src/winio.c:1128
msgid "Unknown Command"
msgstr "不明的命令"

#: src/nano.c:1752
msgid "XON ignored, mumble mumble"
msgstr "忽略 XON，嗯嗯。"

#: src/nano.c:1757
msgid "XOFF ignored, mumble mumble"
msgstr "忽略 XOFF，嗯嗯。"

#: src/nano.c:2171 src/rcfile.c:1333
#, c-format
msgid "Requested tab size \"%s\" is invalid"
msgstr "所要求的跳格寬度 \"%s\" 無效"

#: src/nano.c:2232 src/rcfile.c:1258
#, c-format
msgid "Requested fill size \"%s\" is invalid"
msgstr "所要求的填滿行數 \"%s\" 無效"

#: src/nano.c:2279
#, c-format
msgid "Type '%s -h' for a list of available options.\n"
msgstr ""

#. TRANSLATORS: For the next three strings, if possible, specify
#. * the single-byte shortcuts for both your language and English.
#. * For example, in French: "OoYy" for "Oui".
#: src/prompt.c:848
msgid "Yy"
msgstr "Yy"

#: src/prompt.c:849
msgid "Nn"
msgstr "Nn"

#: src/prompt.c:850
msgid "Aa"
msgstr "Aa"

#: src/prompt.c:872
msgid "Yes"
msgstr "是"

#: src/prompt.c:877
msgid "All"
msgstr "全部"

#: src/prompt.c:882
msgid "No"
msgstr "否"

#: src/rcfile.c:141
#, c-format
msgid "Error in %s on line %lu: "
msgstr "在 %s (位於第 %lu 列) 中發生錯誤: "

#: src/rcfile.c:200
#, c-format
msgid "Argument '%s' has an unterminated \""
msgstr "引數 '%s' 有未封閉的 \""

#: src/rcfile.c:227 src/rcfile.c:279 src/rcfile.c:731 src/rcfile.c:792
#: src/rcfile.c:881 src/rcfile.c:932
msgid "Regex strings must begin and end with a \" character"
msgstr "正規表示式字串必須以 \" 字元開始及結束"

#: src/rcfile.c:253 src/search.c:62
#, c-format
msgid "Bad regex \"%s\": %s"
msgstr "不良的正規表示式 \"%s\": %s"

#: src/rcfile.c:273
msgid "Missing syntax name"
msgstr "缺少語法名稱"

#: src/rcfile.c:344
msgid "The \"none\" syntax is reserved"
msgstr "\"none\" 語法已被保留"

#: src/rcfile.c:351
msgid "The \"default\" syntax must take no extensions"
msgstr "\"default\" 語法必須不含任何副檔名"

#: src/rcfile.c:423
msgid "Missing key name"
msgstr "缺少語法名稱"

#: src/rcfile.c:432 src/rcfile.c:443
msgid "Key name is too short"
msgstr ""

#: src/rcfile.c:453
#, fuzzy
#| msgid "keybindings must begin with \"^\", \"M\", or \"F\""
msgid "Key name must begin with \"^\", \"M\", or \"F\""
msgstr "按鍵繫結必須以 \"^\", \"M\", 或 \"F\" 開始"

#: src/rcfile.c:456
#, fuzzy, c-format
#| msgid "Requested tab size \"%s\" is invalid"
msgid "Key name %s is invalid"
msgstr "所要求的跳格寬度 \"%s\" 無效"

#: src/rcfile.c:465
#, fuzzy
#| msgid "Must specify function to bind key to"
msgid "Must specify a function to bind the key to"
msgstr "必須指定按鍵所繫結的功能"

#. TRANSLATORS: Do not translate the word "all".
#: src/rcfile.c:475
msgid "Must specify a menu (or \"all\") in which to bind/unbind the key"
msgstr ""

#: src/rcfile.c:482
#, fuzzy, c-format
#| msgid "Could not map name \"%s\" to a function"
msgid "Cannot map name \"%s\" to a function"
msgstr "無法映射名稱「%s」到某一功能"

#: src/rcfile.c:489
#, fuzzy, c-format
#| msgid "Could not map name \"%s\" to a menu"
msgid "Cannot map name \"%s\" to a menu"
msgstr "無法映射名稱「%s」到某一選單"

#: src/rcfile.c:521
#, c-format
msgid "Function '%s' does not exist in menu '%s'"
msgstr ""

#: src/rcfile.c:533
#, fuzzy, c-format
#| msgid "Sorry, keystr \"%s\" is an illegal binding"
msgid "Sorry, keystroke \"%s\" may not be rebound"
msgstr "抱歉，按鍵字串「%s」是不合法的繫結"

#: src/rcfile.c:630
#, fuzzy, c-format
#| msgid "Error reading %s: %s"
msgid "Error expanding %s: %s"
msgstr "讀取 %s 時發生錯誤: %s"

#: src/rcfile.c:673
#, c-format
msgid ""
"Color \"%s\" not understood.\n"
"Valid colors are \"green\", \"red\", \"blue\",\n"
"\"white\", \"yellow\", \"cyan\", \"magenta\" and\n"
"\"black\", with the optional prefix \"bright\"\n"
"for foreground colors."
msgstr ""
"顏色 \"%s\" 無法辨識。\n"
"有效的顏色是 \"green\"(綠)、\"red\"(紅)、\"blue\"(藍)、\n"
"\"white\"(白)、\"yellow\"(黃)、\"cyan\"(青)、\"magenta\"(瑰) 和 \n"
"\"black\"(黑)，加上選擇性的前置字 \"bright\"(明亮) \n"
"可用於前景色。"

#: src/rcfile.c:695
msgid "Cannot add a color command without a syntax command"
msgstr "無法增加顏色命令而沒有語法命令"

#: src/rcfile.c:700
msgid "Missing color name"
msgstr "缺少顏色名稱"

#: src/rcfile.c:710 src/rcfile.c:871
msgid "Missing regex string"
msgstr "缺少正規表示式字串"

#: src/rcfile.c:786
msgid "\"start=\" requires a corresponding \"end=\""
msgstr "\"start=\" 要求對應的 \"end=\""

#: src/rcfile.c:838
#, c-format
msgid "Background color \"%s\" cannot be bright"
msgstr "背景色 \"%s\" 不可為明亮"

#: src/rcfile.c:866
msgid "Cannot add a header regex without a syntax command"
msgstr "無法增加標頭正規表示式而沒有語法命令"

#: src/rcfile.c:921
msgid "Cannot add a magic string regex without a syntax command"
msgstr "無法增加魔法正規表示式而沒有語法命令"

#: src/rcfile.c:926
msgid "Missing magic string name"
msgstr "缺少魔法字串名稱"

#: src/rcfile.c:984
#, fuzzy
#| msgid "Cannot add a header regex without a syntax command"
msgid "Cannot add a linter without a syntax command"
msgstr "無法增加標頭正規表示式而沒有語法命令"

#: src/rcfile.c:989
#, fuzzy
#| msgid "Missing color name"
msgid "Missing linter command"
msgstr "缺少顏色名稱"

#: src/rcfile.c:1010
#, fuzzy
#| msgid "Cannot add a color command without a syntax command"
msgid "Cannot add formatter without a syntax command"
msgstr "無法增加顏色命令而沒有語法命令"

#: src/rcfile.c:1015
msgid "Missing formatter command"
msgstr ""

#: src/rcfile.c:1045
#, fuzzy, c-format
#| msgid "Fatal error: no keys mapped for function \"%s\""
msgid "Fatal error: no keys mapped for function \"%s\".  Exiting.\n"
msgstr "嚴重錯誤：沒有按鍵映射至功能「%s」"

#: src/rcfile.c:1047
#, fuzzy, c-format
#| msgid "Exiting.  Please use nano with the -I option if needed to adjust your nanorc settings\n"
msgid "If needed, use nano with the -I option to adjust your nanorc settings.\n"
msgstr "離開中。 如果需要調整您的 nanorc 設定值，請使用 nano 與 -I 選項\n"

#: src/rcfile.c:1108
#, fuzzy, c-format
#| msgid "Could not map name \"%s\" to a menu"
msgid "Could not find syntax \"%s\" to extend"
msgstr "無法映射名稱「%s」到某一選單"

#: src/rcfile.c:1124 src/rcfile.c:1133 src/rcfile.c:1143
#, c-format
msgid "Command \"%s\" not allowed in included file"
msgstr "命令「%s」在包含的檔案中不允許"

#: src/rcfile.c:1149 src/rcfile.c:1358
#, c-format
msgid "Syntax \"%s\" has no color commands"
msgstr "語法「%s」沒有任何顏色命令"

#: src/rcfile.c:1179
#, c-format
msgid "Command \"%s\" not understood"
msgstr "無法辨識 \"%s\" 命令"

#: src/rcfile.c:1194
#, fuzzy
#| msgid "Missing color name"
msgid "Missing option"
msgstr "缺少顏色名稱"

#: src/rcfile.c:1216
#, c-format
msgid "Option \"%s\" requires an argument"
msgstr "選項 \"%s\" 要求引數"

#: src/rcfile.c:1234
msgid "Option is not a valid multibyte string"
msgstr "選項並非正確的多位元字串"

#: src/rcfile.c:1271 src/rcfile.c:1299 src/rcfile.c:1308
msgid "Non-blank characters required"
msgstr "需要非空格字元"

#: src/rcfile.c:1281
msgid "Two single-column characters required"
msgstr "需要兩個單行字元"

#: src/rcfile.c:1347
#, fuzzy, c-format
#| msgid "Cannot unset flag \"%s\""
msgid "Cannot unset option \"%s\""
msgstr "無法解除旗標 \"%s\" 設定"

#: src/rcfile.c:1353
#, fuzzy, c-format
#| msgid "Unknown flag \"%s\""
msgid "Unknown option \"%s\""
msgstr "旗標 \"%s\" 無法辨識"

#: src/rcfile.c:1412
msgid "I can't find my home directory!  Wah!"
msgstr "我找不到我的家目錄！哇！"

#: src/rcfile.c:1450
#, c-format
msgid ""
"\n"
"Press Enter to continue starting nano.\n"
msgstr ""
"\n"
"按下輸入鍵以繼續啟動 nano。\n"

#: src/search.c:96
#, c-format
msgid "\"%.*s%s\" not found"
msgstr "找不到 \"%.*s%s\""

#. TRANSLATORS: The next three strings are modifiers of the search prompt.
#: src/search.c:176
msgid " [Case Sensitive]"
msgstr " [符合大小寫]"

#: src/search.c:180
msgid " [Regexp]"
msgstr " [正規表示式]"

#: src/search.c:184
msgid " [Backwards]"
msgstr " [向後搜尋]"

#. TRANSLATORS: The next two strings are modifiers of the search prompt.
#: src/search.c:189
msgid " (to replace) in selection"
msgstr " 在標記中(置換)"

#: src/search.c:191
msgid " (to replace)"
msgstr " (置換)"

#. TRANSLATORS: This is a prompt.
#: src/search.c:718
msgid "Replace this instance?"
msgstr "置換這個？"

#. TRANSLATORS: This is a prompt.
#: src/search.c:885
msgid "Replace with"
msgstr "以此置換"

#: src/search.c:926
#, c-format
msgid "Replaced %lu occurrence"
msgid_plural "Replaced %lu occurrences"
msgstr[0] "已置換 %lu 處"

#. TRANSLATORS: This is a prompt.
#: src/search.c:966
msgid "Enter line number, column number"
msgstr "輸入列號，行號"

#: src/search.c:993
msgid "Invalid line or column number"
msgstr "無效的列號或行號"

#: src/search.c:1126
msgid "Not a bracket"
msgstr "並非一個括號"

#: src/search.c:1193
msgid "No matching bracket"
msgstr "無對應括號"

#: src/text.c:54
msgid "Mark Set"
msgstr "標記設定"

#: src/text.c:58
msgid "Mark Unset"
msgstr "標記解除"

#: src/text.c:70
#, c-format
msgid "Error invoking \"%s\""
msgstr "呼叫 \"%s\" 錯誤"

#: src/text.c:476
msgid "Nothing in undo buffer!"
msgstr "復原緩衝區中沒有任何東西！"

#: src/text.c:482 src/text.c:635
#, fuzzy, c-format
#| msgid "Internal error: can't match line %d.  Please save your work"
msgid "Internal error: can't match line %d.  Please save your work."
msgstr "內部錯誤：無法匹配第 %d 列。 請儲存您的工作"

#. TRANSLATORS: Eight of the next nine strings describe actions
#. * that are undone or redone.  It are all nouns, not verbs.
#: src/text.c:496 src/text.c:525 src/text.c:646 src/text.c:687
msgid "text add"
msgstr "文字加入"

#: src/text.c:506 src/text.c:657
msgid "text delete"
msgstr "文字刪除"

#: src/text.c:529 src/text.c:695
msgid "line join"
msgstr "列聯結"

#: src/text.c:548 src/text.c:711
msgid "text cut"
msgstr "文字剪下"

#: src/text.c:553 src/text.c:715
msgid "text uncut"
msgstr "文字取消剪下"

#: src/text.c:559 src/text.c:692
#, fuzzy
#| msgid "Internal error: can't setup uncut.  Please save your work."
msgid "Internal error: line is missing.  Please save your work."
msgstr "內部錯誤：無法設定取消剪下。 請儲存您的工作。"

#: src/text.c:562 src/text.c:666
msgid "line break"
msgstr "分列符號"

#: src/text.c:570 src/text.c:726
msgid "text insert"
msgstr "文字插入"

#: src/text.c:591 src/text.c:719
msgid "text replace"
msgstr "文字置換"

#: src/text.c:598 src/text.c:733 src/text.c:1031 src/text.c:1176
msgid "Internal error: unknown type.  Please save your work."
msgstr "內部錯誤：不明型態。 請儲存您的工作。"

#: src/text.c:603
#, c-format
msgid "Undid action (%s)"
msgstr "已復原動作 (%s)"

#: src/text.c:620
msgid "Nothing to re-do!"
msgstr "沒有任何東西可重做！"

#: src/text.c:629
#, fuzzy
#| msgid "Internal error: can't setup uncut.  Please save your work."
msgid "Internal error: cannot set up redo.  Please save your work."
msgstr "內部錯誤：無法設定取消剪下。 請儲存您的工作。"

#: src/text.c:738
#, c-format
msgid "Redid action (%s)"
msgstr "已重做動作 (%s)"

#: src/text.c:827 src/text.c:2503 src/text.c:2939
msgid "Could not create pipe"
msgstr "無法建立管線功能"

#: src/text.c:853 src/text.c:2590 src/text.c:2745 src/text.c:2987
#: src/text.c:3278
msgid "Could not fork"
msgstr "執行功能無效"

#: src/text.c:1855
#, c-format
msgid "Bad quote string %s: %s"
msgstr "不良引用字串 %s: %s"

#: src/text.c:2237
msgid "Can now UnJustify!"
msgstr "現在可以還原對齊！"

#: src/text.c:2430
msgid "Edit a replacement"
msgstr "編輯替代文字"

#: src/text.c:2505
msgid "Creating misspelled word list, please wait..."
msgstr "正在建立錯字列表，請稍待…"

#: src/text.c:2596 src/text.c:2994
msgid "Could not get size of pipe buffer"
msgstr "無法得知管線緩衝區大小"

#: src/text.c:2647
msgid "Error invoking \"spell\""
msgstr "呼叫 \"spell\" 錯誤"

#: src/text.c:2650
msgid "Error invoking \"sort -f\""
msgstr "呼叫 \"sort -f\" 錯誤"

#: src/text.c:2653
msgid "Error invoking \"uniq\""
msgstr "呼叫 \"uniq\" 錯誤"

#: src/text.c:2876
#, fuzzy
#| msgid "Invoke the spell checker, if available"
msgid "Invoking spell checker, please wait"
msgstr "嘗試呼叫拼字檢查"

#: src/text.c:2892
#, c-format
msgid "Spell checking failed: %s"
msgstr "拼字檢查失敗: %s"

#: src/text.c:2894
#, c-format
msgid "Spell checking failed: %s: %s"
msgstr "拼字檢查失敗: %s: %s"

#: src/text.c:2897
msgid "Finished checking spelling"
msgstr "拼字檢查結束"

#: src/text.c:2922
#, fuzzy
#| msgid "Don't add newlines to the ends of files"
msgid "No linter defined for this type of file!"
msgstr "不要將換列加到檔案末端"

#: src/text.c:2927
msgid "Save modified buffer before linting?"
msgstr ""

#: src/text.c:2944
msgid "Invoking linter, please wait"
msgstr ""

#: src/text.c:3100
#, c-format
msgid "Got 0 parsable lines from command: %s"
msgstr ""

#: src/text.c:3133
#, c-format
msgid "This message is for unopened file %s, open it in a new buffer?"
msgstr ""

#: src/text.c:3149
msgid "No more errors in unopened files, cancelling"
msgstr ""

#: src/text.c:3184
#, fuzzy
#| msgid "Show this message"
msgid "At last message"
msgstr "顯示此訊息"

#: src/text.c:3189
#, fuzzy
#| msgid "Show this message"
msgid "At first message"
msgstr "顯示此訊息"

#: src/text.c:3229
msgid "Finished"
msgstr ""

#: src/text.c:3251
msgid "Invoking formatter, please wait"
msgstr ""

#: src/text.c:3306
msgid "Finished formatting"
msgstr ""

#: src/text.c:3388
#, c-format
msgid "%sWords: %lu  Lines: %ld  Chars: %lu"
msgstr "%s字數: %lu  列數: %ld  字元數: %lu"

#: src/text.c:3389
msgid "In Selection:  "
msgstr "於選擇部分: "

#. TRANSLATORS: This is displayed when the next keystroke will be
#. * inserted verbatim.
#: src/text.c:3403
msgid "Verbatim Input"
msgstr "原形輸入"

#: src/utils.c:391 src/utils.c:403
msgid "nano is out of memory!"
msgstr "nano 已耗盡記憶體！"

#. TRANSLATORS: This is displayed during the input of a
#. * six-digit hexadecimal Unicode character code.
#: src/winio.c:1429
msgid "Unicode Input"
msgstr "萬國碼輸入"

#: src/winio.c:1993 src/winio.c:1997
msgid "Modified"
msgstr "已更動"

#: src/winio.c:1994
msgid "View"
msgstr "觀看"

#: src/winio.c:2008
msgid "DIR:"
msgstr "目錄:"

#: src/winio.c:2015
msgid "File:"
msgstr "檔案:"

#: src/winio.c:3145
#, c-format
msgid "line %ld/%ld (%d%%), col %lu/%lu (%d%%), char %lu/%lu (%d%%)"
msgstr "列 %ld/%ld (%d%%), 行 %lu/%lu (%d%%), 字元 %lu/%lu (%d%%)"

#: src/winio.c:3275
msgid "The nano text editor"
msgstr "nano 文字編輯器"

#: src/winio.c:3276
msgid "version"
msgstr "版本"

#: src/winio.c:3277
msgid "Brought to you by:"
msgstr "來自於:"

#: src/winio.c:3278
msgid "Special thanks to:"
msgstr "特別感謝:"

#: src/winio.c:3279
msgid "The Free Software Foundation"
msgstr "自由軟體基金會"

#: src/winio.c:3280
msgid "the many translators and the TP"
msgstr ""

#: src/winio.c:3281
msgid "For ncurses:"
msgstr "ncurses 部分:"

#: src/winio.c:3282
msgid "and anyone else we forgot..."
msgstr "以及其他我們不記得的人…"

#: src/winio.c:3283
msgid "Thank you for using nano!"
msgstr "謝謝您使用 nano﹗"

#~ msgid "Cannot prepend or append to a symlink with --nofollow set"
#~ msgstr "--nofollow 設定下，無法前引或附加至符號連結檔"

#~ msgid "Insert File"
#~ msgstr "插入檔案"

#~ msgid "Go to previous screen"
#~ msgstr "跳至前一畫面"

#~ msgid "Find Other Bracket"
#~ msgstr "尋找其他括號"

#~ msgid "Long line wrapping"
#~ msgstr "長列轉換"

#~ msgid "Multiple file buffers"
#~ msgstr "多重檔案緩衝區"

#~ msgid "Soft line wrapping"
#~ msgstr "長列換列"

#~ msgid "Enable multiple file buffers"
#~ msgstr "開啟多重檔案緩衝區功能"

#~ msgid "Don't follow symbolic links, overwrite"
#~ msgstr "不要依照符號連結，而是覆寫"

#~ msgid "Allow generic undo [EXPERIMENTAL]"
#~ msgstr "允許一般的復原 [實驗性質]"

#~ msgid "(ignored, for Pico compatibility)"
#~ msgstr "(忽略，為了與 Pico 相容)"

#~ msgid "Sorry, support for this function has been disabled"
#~ msgstr "抱歉，已經關閉此功能的支援"

#~ msgid "Must specify menu to bind key to (or \"all\")"
#~ msgstr "必須指定按鍵所繫結的選單 (或是 \"all\")"

#~ msgid "Missing flag"
#~ msgstr "缺少旗標"

#~ msgid "line wrap"
#~ msgstr "長列換列"

#~ msgid "Internal error: unknown type.  Please save your work"
#~ msgstr "內部錯誤：不明型態。 請儲存您的工作"

#~ msgid "Internal error: Redo setup failed.  Please save your work"
#~ msgstr "內部錯誤：重做設定失敗。 請儲存您的工作"

#~ msgid "Could not pipe"
#~ msgstr "管線功能無效"