# Simplified Chinese translation for opcode.
# Copyright (C) 2005 Free Software Foundation, Inc.
# This file is distributed under the same license as the binutils package.
# Meng Jie <zuxyhere@eastday.com>, 2005.
# Mingye Wang <arthur200126@gmail.com>, 2015.
# Boyuan Yang <073plan@gmail.com>, 2017, 2018.
#
msgid ""
msgstr ""
"Project-Id-Version: opcodes 2.30.0\n"
"Report-Msgid-Bugs-To: https://sourceware.org/bugzilla/\n"
"POT-Creation-Date: 2024-01-15 14:56+0000\n"
"PO-Revision-Date: 2018-05-15 21:17+0800\n"
"Last-Translator: Boyuan Yang <073plan@gmail.com>\n"
"Language-Team: Chinese (simplified) <i18n-zh@googlegroups.com>\n"
"Language: zh_CN\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Plural-Forms: nplurals=1; plural=0;\n"
"X-Bugs: Report translation errors to the Language-Team address.\n"
"X-Generator: Poedit 2.0.7\n"

#: aarch64-asm.c:874
msgid "specified register cannot be read from"
msgstr ""

#: aarch64-asm.c:883
msgid "specified register cannot be written to"
msgstr ""

#. Invalid option.
#: aarch64-dis.c:103 arc-dis.c:807 arm-dis.c:12303 kvx-dis.c:154
#, fuzzy, c-format
#| msgid "Unrecognised disassembler option: %s\n"
msgid "unrecognised disassembler option: %s"
msgstr "无法识别的反汇编器选项：%s\n"

#: aarch64-dis.c:3955
#, c-format
msgid "this `%s' should have an immediately preceding `%s'"
msgstr ""

#: aarch64-dis.c:3962
#, c-format
msgid "expected `%s' after previous `%s'"
msgstr ""

#: aarch64-dis.c:4388
#, c-format
msgid ""
"\n"
"The following AARCH64 specific disassembler options are supported for use\n"
"with the -M switch (multiple options should be separated by commas):\n"
msgstr ""
"\n"
"下列 AARCH64 特定的反汇编器选项可通过 -M 开关启用（使用逗号分隔多个选项）：\n"

#: aarch64-dis.c:4392
#, c-format
msgid ""
"\n"
"  no-aliases         Don't print instruction aliases.\n"
msgstr ""
"\n"
"  no-aliases         不要打印指令别名。\n"

#: aarch64-dis.c:4395
#, c-format
msgid ""
"\n"
"  aliases            Do print instruction aliases.\n"
msgstr ""
"\n"
"  aliases            要打印指令别名。\n"

#: aarch64-dis.c:4398
#, fuzzy, c-format
#| msgid ""
#| "\n"
#| "  no-aliases         Don't print instruction aliases.\n"
msgid ""
"\n"
"  no-notes         Don't print instruction notes.\n"
msgstr ""
"\n"
"  no-aliases         不要打印指令别名。\n"

#: aarch64-dis.c:4401
#, fuzzy, c-format
#| msgid ""
#| "\n"
#| "  aliases            Do print instruction aliases.\n"
msgid ""
"\n"
"  notes            Do print instruction notes.\n"
msgstr ""
"\n"
"  aliases            要打印指令别名。\n"

#: aarch64-dis.c:4405
#, c-format
msgid ""
"\n"
"  debug_dump         Temp switch for debug trace.\n"
msgstr ""
"\n"
"  debug_dump         调试跟踪的临时开关。\n"

#: aarch64-dis.c:4409 arc-dis.c:1607 arc-dis.c:1630 arc-dis.c:1633
#: kvx-dis.c:1586 loongarch-dis.c:337 mips-dis.c:2903 mips-dis.c:2915
#: mips-dis.c:2918 nfp-dis.c:2995 riscv-dis.c:1489 riscv-dis.c:1492
#, c-format
msgid "\n"
msgstr "\n"

#: aarch64-opc.c:1446
msgid "immediate value"
msgstr "立即数"

#: aarch64-opc.c:1456
msgid "immediate offset"
msgstr "立即数偏移"

#: aarch64-opc.c:1466
msgid "register number"
msgstr "寄存器数"

#: aarch64-opc.c:1476
msgid "register element index"
msgstr "寄存器元素下标"

#: aarch64-opc.c:1486
msgid "shift amount"
msgstr "移位操作数"

#: aarch64-opc.c:1498
msgid "multiplier"
msgstr ""

#: aarch64-opc.c:1617
msgid "expected a selection register in the range w12-w15"
msgstr ""

#: aarch64-opc.c:1621
msgid "expected a selection register in the range w8-w11"
msgstr ""

#: aarch64-opc.c:1640
#, fuzzy
#| msgid "offset not a multiple of 2"
msgid "starting offset is not a multiple of 2"
msgstr "偏移量不是 2 的倍数"

#: aarch64-opc.c:1641
#, fuzzy
#| msgid "offset not a multiple of 4"
msgid "starting offset is not a multiple of 4"
msgstr "偏移量不是 4 的倍数"

#: aarch64-opc.c:1649
msgid "expected a single offset rather than a range"
msgstr ""

#: aarch64-opc.c:1653
msgid "expected a range of two offsets"
msgstr ""

#: aarch64-opc.c:1656
msgid "expected a range of four offsets"
msgstr ""

#: aarch64-opc.c:1737
msgid "second reg in pair should be xzr if first is xzr"
msgstr ""

#: aarch64-opc.c:1751
msgid "reg pair must start from even reg"
msgstr ""

#: aarch64-opc.c:1757
msgid "reg pair must be contiguous"
msgstr ""

#: aarch64-opc.c:1771
msgid "extraneous register"
msgstr "多余寄存器"

#: aarch64-opc.c:1777
msgid "missing register"
msgstr "缺失寄存器"

#: aarch64-opc.c:1788
msgid "stack pointer register expected"
msgstr "预期的堆栈指针寄存器"

#: aarch64-opc.c:1906 aarch64-opc.c:1922
#, fuzzy
#| msgid "immediate out of range"
msgid "start register out of range"
msgstr "立即数越界"

#: aarch64-opc.c:2094 aarch64-opc.c:2102 aarch64-opc.c:2125
msgid "unexpected address writeback"
msgstr "意外的地址写回"

#: aarch64-opc.c:2113
msgid "address writeback expected"
msgstr "预期的地址写回"

#: aarch64-opc.c:2173
msgid "negative or unaligned offset expected"
msgstr "预期的负或未对齐的偏移量"

#: aarch64-opc.c:2230
msgid "invalid register offset"
msgstr "无效的寄存器偏移量"

#: aarch64-opc.c:2252
#, fuzzy
msgid "invalid post-increment amount"
msgstr "类型没有后自增运算符"

#: aarch64-opc.c:2268 aarch64-opc.c:2814
msgid "invalid shift amount"
msgstr "无效的移位操作数"

#: aarch64-opc.c:2281
#, fuzzy
#| msgid "invalid conditional option"
msgid "invalid extend/shift operator"
msgstr "无效的移位操作符"

#: aarch64-opc.c:2327 aarch64-opc.c:2614 aarch64-opc.c:2649 aarch64-opc.c:2668
#: aarch64-opc.c:2676 aarch64-opc.c:2767 aarch64-opc.c:2944 aarch64-opc.c:3044
#: aarch64-opc.c:3057
msgid "immediate out of range"
msgstr "立即数越界"

#: aarch64-opc.c:2357 aarch64-opc.c:2399 aarch64-opc.c:2462 aarch64-opc.c:2496
msgid "invalid addressing mode"
msgstr "无效寻址模式"

#: aarch64-opc.c:2454
#, fuzzy
msgid "index register xzr is not allowed"
msgstr "寄存器元素下标"

#: aarch64-opc.c:2523
#, fuzzy
msgid "invalid increment amount"
msgstr "类型没有后自增运算符"

#: aarch64-opc.c:2602 aarch64-opc.c:2624 aarch64-opc.c:2847 aarch64-opc.c:2855
#: aarch64-opc.c:2921 aarch64-opc.c:2950
msgid "invalid shift operator"
msgstr "无效的移位操作符"

#: aarch64-opc.c:2608
msgid "shift amount must be 0 or 12"
msgstr "移位量必须为 0 或 12"

#: aarch64-opc.c:2631
msgid "shift amount must be a multiple of 16"
msgstr "移位量必须是 16 的倍数"

#: aarch64-opc.c:2643
msgid "negative immediate value not allowed"
msgstr "不允许负立即数"

#: aarch64-opc.c:2778
#, fuzzy
msgid "immediate zero expected"
msgstr "预期的浮点常量立即数"

#: aarch64-opc.c:2792
#, fuzzy
#| msgid "shift amount expected to be 0 or 12"
msgid "rotate expected to be 0, 90, 180 or 270"
msgstr "移位量预计为 0 或 12"

#: aarch64-opc.c:2803
#, fuzzy
#| msgid "shift amount expected to be 0 or 12"
msgid "rotate expected to be 90 or 270"
msgstr "移位量预计为 0 或 12"

#: aarch64-opc.c:2863
#, fuzzy
msgid "shift is not permitted"
msgstr "指针不能用作 case 常量"

#: aarch64-opc.c:2888
msgid "invalid value for immediate"
msgstr "无效的立即数的值"

#: aarch64-opc.c:2913
msgid "shift amount must be 0 or 16"
msgstr "移位量必须为 0 或 16"

#: aarch64-opc.c:2934
msgid "floating-point immediate expected"
msgstr "预期的浮点常量立即数"

#: aarch64-opc.c:2968
msgid "no shift amount allowed for 8-bit constants"
msgstr ""

#: aarch64-opc.c:2978
msgid "shift amount must be 0 or 8"
msgstr "移位量必须为 0 或 8"

#: aarch64-opc.c:2991
msgid "immediate too big for element size"
msgstr ""

#: aarch64-opc.c:2998
msgid "invalid arithmetic immediate"
msgstr "无效的算术立即数"

#: aarch64-opc.c:3012
msgid "floating-point value must be 0.5 or 1.0"
msgstr "浮点值必须为 0.5 或 1.0"

#: aarch64-opc.c:3022
msgid "floating-point value must be 0.5 or 2.0"
msgstr "浮点值必须为 0.5 或 2.0"

#: aarch64-opc.c:3032
msgid "floating-point value must be 0.0 or 1.0"
msgstr "浮点值必须为 0.0 或 1.0"

#: aarch64-opc.c:3063
#, fuzzy
#| msgid "invalid mask field"
msgid "invalid replicated MOV immediate"
msgstr "不允许负立即数"

#: aarch64-opc.c:3121
#, fuzzy
#| msgid "value must be a multiple of 16"
msgid "byte index must be a multiple of 8"
msgstr "值必须是 16 的倍数"

#: aarch64-opc.c:3151
msgid "the register-index form of PRFM does not accept opcodes in the range 24-31"
msgstr ""

#: aarch64-opc.c:3204
#, fuzzy
msgid "extend operator expected"
msgstr "需要%<operator%>"

#: aarch64-opc.c:3217
#, fuzzy
msgid "missing extend operator"
msgstr "扩展%s 失败"

#: aarch64-opc.c:3223
msgid "'LSL' operator not allowed"
msgstr "不允许 'LSL' 操作符"

#: aarch64-opc.c:3244
msgid "W register expected"
msgstr "预期的 W 寄存器"

#: aarch64-opc.c:3255
msgid "shift operator expected"
msgstr "预期的移位操作符"

#: aarch64-opc.c:3262
msgid "'ROR' operator not allowed"
msgstr "不允许 'ROR' 操作符"

#: aarch64-opc.c:4716
#, fuzzy
msgid "reading from a write-only register"
msgstr "尝试读取 writeonly 登记册"

#: aarch64-opc.c:4718
#, fuzzy
msgid "writing to a read-only register"
msgstr "不能设置只读属性"

#: aarch64-opc.c:5242
#, fuzzy
#| msgid "target register operand must be even"
msgid "the three register operands must be distinct from one another"
msgstr "目的寄存器操作数必须是偶数"

#: aarch64-opc.c:5353
msgid "destination register differs from preceding instruction"
msgstr ""

#: aarch64-opc.c:5356
#, fuzzy
#| msgid "unrecognized form of instruction"
msgid "source register differs from preceding instruction"
msgstr "启用对短加载指令的使用"

#: aarch64-opc.c:5359
#, fuzzy
#| msgid "unrecognized form of instruction"
msgid "size register differs from preceding instruction"
msgstr "启用对短加载指令的使用"

#: aarch64-opc.c:5407
msgid "instruction opens new dependency sequence without ending previous one"
msgstr ""

#: aarch64-opc.c:5436
msgid "previous `movprfx' sequence not closed"
msgstr ""

#: aarch64-opc.c:5455
msgid "SVE instruction expected after `movprfx'"
msgstr ""

#: aarch64-opc.c:5468
msgid "SVE `movprfx' compatible instruction expected"
msgstr ""

#: aarch64-opc.c:5556
msgid "predicated instruction expected after `movprfx'"
msgstr ""

#: aarch64-opc.c:5568
msgid "merging predicate expected due to preceding `movprfx'"
msgstr ""

#: aarch64-opc.c:5580
msgid "predicate register differs from that in preceding `movprfx'"
msgstr ""

#: aarch64-opc.c:5599
msgid "output register of preceding `movprfx' not used in current instruction"
msgstr ""

#: aarch64-opc.c:5612
msgid "output register of preceding `movprfx' expected as output"
msgstr ""

#: aarch64-opc.c:5624
msgid "output register of preceding `movprfx' used as input"
msgstr ""

#: aarch64-opc.c:5640
msgid "register size not compatible with previous `movprfx'"
msgstr ""

#: alpha-opc.c:154
msgid "branch operand unaligned"
msgstr "分支操作数未对齐"

#: alpha-opc.c:170 alpha-opc.c:186
msgid "jump hint unaligned"
msgstr "跳转提示未对齐"

#: arc-dis.c:380
msgid ""
"\n"
"Warning: disassembly may be wrong due to guessed opcode class choice.\n"
"Use -M<class[,class]> to select the correct opcode class(es).\n"
"\t\t\t\t"
msgstr ""

#: arc-dis.c:442
msgid "An error occurred while generating the extension instruction operations"
msgstr ""

#: arc-dis.c:850
#, fuzzy, c-format
#| msgid "Unrecognised disassembler CPU option: %s\n"
msgid "unrecognised disassembler CPU option: %s"
msgstr "无法识别的反汇编器 CPU 选项：%s\n"

#: arc-dis.c:1323
#, fuzzy
msgid ""
"\n"
"Warning: illegal use of double register pair.\n"
msgstr "不要使用 fabss 自定义指令"

#: arc-dis.c:1489
msgid "Enforce the designated architecture while decoding."
msgstr ""

#: arc-dis.c:1491
#, fuzzy
#| msgid "unrecognized instruction"
msgid "Recognize DSP instructions."
msgstr "无法识别的指令"

#: arc-dis.c:1493
#, fuzzy
#| msgid "  spfp            Recognize FPX SP instructions.\n"
msgid "Recognize FPX SP instructions."
msgstr "  spfp            识别 FPX SP 指令。\n"

#: arc-dis.c:1495
#, fuzzy
#| msgid "  dpfp            Recognize FPX DP instructions.\n"
msgid "Recognize FPX DP instructions."
msgstr "  dpfp            识别 FPX DP 指令。\n"

#: arc-dis.c:1497
#, fuzzy
#| msgid ""
#| "\n"
#| "  msa             Recognize MSA instructions.\n"
msgid "Recognize FPU QuarkSE-EM instructions."
msgstr ""
"\n"
"  msa             识别 MSA 指令。\n"

#: arc-dis.c:1499
#, fuzzy
#| msgid ""
#| "\n"
#| "  msa             Recognize MSA instructions.\n"
msgid "Recognize double assist FPU instructions."
msgstr ""
"\n"
"  msa             识别 MSA 指令。\n"

#: arc-dis.c:1501
#, fuzzy
#| msgid "  fpus            Recognize single precision FPU instructions.\n"
msgid "Recognize single precision FPU instructions."
msgstr "  fpus            识别单精度 FPU 指令。\n"

#: arc-dis.c:1503
#, fuzzy
#| msgid "  fpud            Recognize double precision FPU instructions.\n"
msgid "Recognize double precision FPU instructions."
msgstr "  fpud            识别双精度 FPU 指令。\n"

#: arc-dis.c:1505
#, fuzzy
#| msgid "unrecognized instruction"
msgid "Recognize NPS400 instructions."
msgstr "无法识别的指令"

#: arc-dis.c:1507
msgid "Use only hexadecimal number to print immediates."
msgstr ""

#: arc-dis.c:1582
#, fuzzy, c-format
#| msgid ""
#| "\n"
#| "The following AARCH64 specific disassembler options are supported for use\n"
#| "with the -M switch (multiple options should be separated by commas):\n"
msgid ""
"\n"
"The following ARC specific disassembler options are supported for use \n"
"with the -M switch (multiple options should be separated by commas):\n"
msgstr ""
"\n"
"下列 AARCH64 特定的反汇编器选项可通过 -M 开关启用（使用逗号分隔多个选项）：\n"

#: arc-dis.c:1616 mips-dis.c:2910 riscv-dis.c:1484
#, fuzzy, c-format
#| msgid ""
#| "\n"
#| "  For the options above, the following values are supported for \"ABI\":\n"
#| "   "
msgid ""
"\n"
"  For the options above, the following values are supported for \"%s\":\n"
"   "
msgstr ""
"\n"
"  对于以上的选项，以下值可被用于 \"ABI\"：\n"
"   "

#: arc-dis.c:1626
#, c-format
msgid ""
"\n"
"   "
msgstr ""

#: arc-opc.c:41 arc-opc.c:64 arc-opc.c:90 arc-opc.c:114
msgid "LP_COUNT register cannot be used as destination register"
msgstr ""

#: arc-opc.c:88
msgid "cannot use odd number destination register"
msgstr ""

#: arc-opc.c:101 arc-opc.c:112
msgid "cannot use odd number source register"
msgstr ""

#: arc-opc.c:127
msgid "operand is not zero"
msgstr "操作数不是 0"

#: arc-opc.c:186
#, fuzzy
msgid "register R30 is a limm indicator"
msgstr "立即数不能是寄存器"

#: arc-opc.c:188
#, fuzzy
#| msgid "immediate out of range"
msgid "register out of range"
msgstr "立即数越界"

#: arc-opc.c:207
msgid "register must be R0"
msgstr "寄存器必须是 R0"

#: arc-opc.c:225
msgid "register must be R1"
msgstr "寄存器必须是 R1"

#: arc-opc.c:242
msgid "register must be R2"
msgstr "寄存器必须是 R2"

#: arc-opc.c:259
msgid "register must be R3"
msgstr "寄存器必须是 R3"

#: arc-opc.c:276
msgid "register must be SP"
msgstr "寄存器必须是 SP"

#: arc-opc.c:293
msgid "register must be GP"
msgstr "寄存器必须是 GP"

#: arc-opc.c:310
msgid "register must be PCL"
msgstr "寄存器必须是 PCL"

#: arc-opc.c:327
msgid "register must be BLINK"
msgstr "寄存器必须是 BLINK"

#: arc-opc.c:344
msgid "register must be ILINK1"
msgstr "寄存器必须是 ILINK1"

#: arc-opc.c:361
msgid "register must be ILINK2"
msgstr "寄存器必须是 ILINK2"

#. ARC NPS400 Support: See comment near head of file.
#: arc-opc.c:392 arc-opc.c:430 arc-opc.c:468 arc-opc.c:737
msgid "register must be either r0-r3 or r12-r15"
msgstr "寄存器必须是 r0-r3 或 r12-r15"

#: arc-opc.c:519
msgid "accepted values are from -1 to 6"
msgstr "可接受的值在 -1 到 6 之间"

#: arc-opc.c:548
#, fuzzy
#| msgid "Bad register name"
msgid "first register of the range should be r13"
msgstr "%q+D的寄存器名无效"

#: arc-opc.c:550
msgid "last register of the range doesn't fit"
msgstr ""

#: arc-opc.c:570 arc-opc.c:585
msgid "invalid register number, should be fp"
msgstr "无效的寄存器数，应当为 fp"

#: arc-opc.c:607
msgid "invalid register number, should be blink"
msgstr "无效的寄存器数，应当为 blink"

#: arc-opc.c:629
msgid "invalid register number, should be pcl"
msgstr "无效的寄存器数，应当为 pcl"

#: arc-opc.c:785
msgid "invalid size, should be 1, 2, 4, or 8"
msgstr "无效的大小，应当为 1、2、4 或 8"

#: arc-opc.c:830
msgid "invalid immediate, must be 1, 2, or 4"
msgstr "无效的立即数，应当为 1、2 或 4"

#: arc-opc.c:869
#, fuzzy
#| msgid "invalid mask field"
msgid "invalid value for CMEM ld/st immediate"
msgstr "不允许负立即数"

#: arc-opc.c:896
msgid "invalid position, should be 0, 16, 32, 48 or 64."
msgstr "无效的位置，应当为 0、16、32、48 或 64。"

#: arc-opc.c:930
msgid "invalid position, should be 16, 32, 64 or 128."
msgstr "无效的位置，应当为 16、32、64 或 128。"

#: arc-opc.c:952
#, fuzzy
#| msgid "immediate value out of range"
msgid "invalid size value must be on range 1-64."
msgstr "立即数越界"

#: arc-opc.c:983
#, fuzzy
#| msgid "Invalid position, should be 0, 8, 16, or 24"
msgid "invalid position, should be 0, 8, 16, or 24"
msgstr "无效的位置，应当为 0、8、16 或 24"

#: arc-opc.c:1008
msgid "invalid size, value must be "
msgstr "无效的大小，值必须为 "

#: arc-opc.c:1082
msgid "value out of range 1 - 256"
msgstr "值越界 1 - 256"

#: arc-opc.c:1091
msgid "value must be power of 2"
msgstr "值必须是 2 的倍数"

#: arc-opc.c:1144
msgid "value must be in the range 0 to 28"
msgstr "值必须在 0 到 28 的范围中"

#: arc-opc.c:1166
msgid "value must be in the range 1 to "
msgstr "值的范围必须在 1 到 "

#: arc-opc.c:1196
msgid "value must be in the range 0 to 240"
msgstr "值必须在 0 到 240 的范围中"

#: arc-opc.c:1198
msgid "value must be a multiple of 16"
msgstr "值必须是 16 的倍数"

#: arc-opc.c:1218
#, fuzzy
msgid "invalid address type for operand"
msgstr "无效寻址模式"

#: arc-opc.c:1252
msgid "value must be in the range 0 to 31"
msgstr "值必须在 0 到 31 的范围中"

#: arc-opc.c:1277
msgid "invalid position, should be one of: 0,4,8,...124."
msgstr "无效的位置，应当为 0、4、8、...、124。"

#: arm-dis.c:5204
msgid "Select raw register names"
msgstr "选择原始寄存器名称"

#: arm-dis.c:5206
msgid "Select register names used by GCC"
msgstr "选择 GCC 使用的寄存器名称"

#: arm-dis.c:5208
msgid "Select register names used in ARM's ISA documentation"
msgstr "选择 ARM 的 ISA 文档中使用的寄存器名称"

#: arm-dis.c:5210
msgid "Assume all insns are Thumb insns"
msgstr ""

#: arm-dis.c:5211
msgid "Examine preceding label to determine an insn's type"
msgstr ""

#: arm-dis.c:5212
#, fuzzy
#| msgid "register number must be even"
msgid "Select register names used in the APCS"
msgstr "立即数不能是寄存器"

#: arm-dis.c:5214
#, fuzzy
#| msgid "register number must be even"
msgid "Select register names used in the ATPCS"
msgstr "立即数不能是寄存器"

#: arm-dis.c:5216
msgid "Select special register names used in the ATPCS"
msgstr "选择 ATPCS 中使用的特殊寄存器名称"

#: arm-dis.c:5218
msgid "Enable CDE extensions for coprocessor N space"
msgstr ""

#: arm-dis.c:8530
msgid "<illegal precision>"
msgstr "<非法的精度>"

#: arm-dis.c:12264
#, fuzzy, c-format
#| msgid "Unrecognised register name set: %s\n"
msgid "unrecognised register name set: %s"
msgstr "无法识别的寄存器名称集：%s\n"

#: arm-dis.c:12278
#, c-format
msgid "cde coprocessor not between 0-7: %s"
msgstr ""

#: arm-dis.c:12284
#, c-format
msgid "coproc must have an argument: %s"
msgstr ""

#: arm-dis.c:12297
#, c-format
msgid "coprocN argument takes options \"generic\", \"cde\", or \"CDE\": %s"
msgstr ""

#: arm-dis.c:13016
#, c-format
msgid ""
"\n"
"The following ARM specific disassembler options are supported for use with\n"
"the -M switch:\n"
msgstr ""
"\n"
"下列 ARM 特定的反汇编器选项可通过 -M 开关启用：\n"

#: avr-dis.c:130 avr-dis.c:152
#, c-format
msgid "undefined"
msgstr "未定义"

#: avr-dis.c:251
#, fuzzy, c-format
#| msgid "<internal disassembler error>"
msgid "internal disassembler error"
msgstr "<反汇编器内部错误>"

#: avr-dis.c:312
#, c-format
msgid "unknown constraint `%c'"
msgstr "未知的约束‘%c’"

#: bpf-dis.c:55
#, fuzzy, c-format
#| msgid ""
#| "\n"
#| "The following MIPS specific disassembler options are supported for use\n"
#| "with the -M switch (multiple options should be separated by commas):\n"
msgid ""
"\n"
"The following BPF specific disassembler options are supported for use\n"
"with the -M switch (multiple options should be separated by commas):\n"
msgstr ""
"\n"
"下列 MIPS 特定的反汇编器选项可通过 -M 开关启用（使用逗号分隔多个选项）：\n"

#: bpf-dis.c:59
#, c-format
msgid ""
"      pseudoc                  Use pseudo-c syntax.\n"
"      v1,v2,v3,v4,xbpf         Version of the BPF ISA to use.\n"
"      hex,oct,dec              Output numerical base for immediates.\n"
msgstr ""

#. The option without '=' should be defined above.
#: bpf-dis.c:90 riscv-dis.c:120 riscv-dis.c:157
#, fuzzy, c-format
#| msgid "Unrecognised disassembler option: %s\n"
msgid "unrecognized disassembler option: %s"
msgstr "无法识别的反汇编器选项：%s\n"

#: bpf-dis.c:166
#, c-format
msgid "unknown BPF CPU version %u\n"
msgstr ""

#: bpf-dis.c:296
#, fuzzy, c-format
#| msgid "<internal error in opcode table: %s %s>\n"
msgid "# internal error, unknown tag in opcode template (%s)"
msgstr "<操作数表中出现内部错误：%s %s>\n"

#: cgen-asm.c:351 epiphany-ibld.c:203 fr30-ibld.c:203 frv-ibld.c:203
#: ip2k-ibld.c:203 iq2000-ibld.c:203 lm32-ibld.c:203 m32c-ibld.c:203
#: m32r-ibld.c:203 mep-ibld.c:203 mt-ibld.c:203 or1k-ibld.c:203
#: xstormy16-ibld.c:203
#, c-format
msgid "operand out of range (%ld not between %ld and %ld)"
msgstr "操作数越界(%ld 不在 %ld 和 %ld 之间)"

#: cgen-asm.c:373
#, c-format
msgid "operand out of range (%lu not between %lu and %lu)"
msgstr "操作数越界(%lu 不在 %lu 和 %lu 之间)"

#: cris-desc.c:2622
#, c-format
msgid "internal error: cris_cgen_rebuild_tables: conflicting insn-chunk-bitsize values: `%d' vs. `%d'"
msgstr ""

#: cris-desc.c:2710
#, c-format
msgid "internal error: cris_cgen_cpu_open: unsupported argument `%d'"
msgstr ""

#: cris-desc.c:2729
#, c-format
msgid "internal error: cris_cgen_cpu_open: no endianness specified"
msgstr ""

#: d30v-dis.c:232
#, fuzzy, c-format
#| msgid "illegal bitmask"
msgid "illegal id (%d)"
msgstr "非法的位掩码"

#: d30v-dis.c:259
#, c-format
msgid "<unknown register %d>"
msgstr "<未知的寄存器 %d>"

#. Can't happen.
#: dis-buf.c:61
#, c-format
msgid "Unknown error %d\n"
msgstr "未知错误 %d\n"

#: dis-buf.c:67
#, fuzzy, c-format
#| msgid "Address 0x%s is out of bounds.\n"
msgid "Address 0x%<PRIx64> is out of bounds.\n"
msgstr "地址 0x%s 越界。\n"

#: disassemble.c:862
#, c-format
msgid "assertion fail %s:%d"
msgstr ""

#: disassemble.c:863
msgid "Please report this bug"
msgstr ""

#: epiphany-asm.c:68
#, fuzzy
#| msgid "unrecognized form of instruction"
msgid "register unavailable for short instructions"
msgstr "启用对短加载指令的使用"

#: epiphany-asm.c:115
#, fuzzy
#| msgid "register number must be even"
msgid "register name used as immediate value"
msgstr "立即数不能是寄存器"

#. Don't treat "mov ip,ip" as a move-immediate.
#: epiphany-asm.c:178 epiphany-asm.c:234
#, fuzzy
msgid "register source in immediate move"
msgstr "立即数不能是寄存器"

#: epiphany-asm.c:187
msgid "byte relocation unsupported"
msgstr "不支持字节重定位"

#. -- assembler routines inserted here.
#. -- asm.c
#: epiphany-asm.c:193 frv-asm.c:972 iq2000-asm.c:56 lm32-asm.c:95
#: lm32-asm.c:127 lm32-asm.c:157 lm32-asm.c:187 lm32-asm.c:217 lm32-asm.c:247
#: m32c-asm.c:140 m32c-asm.c:235 m32c-asm.c:276 m32c-asm.c:334 m32c-asm.c:355
#: m32r-asm.c:53 mep-asm.c:241 mep-asm.c:259 mep-asm.c:274 mep-asm.c:289
#: mep-asm.c:301 or1k-asm.c:54
msgid "missing `)'"
msgstr "缺少‘)’"

#: epiphany-asm.c:270
msgid "ABORT: unknown operand"
msgstr "中止：未知的操作数"

#: epiphany-asm.c:296
#, fuzzy
msgid "Not a pc-relative address."
msgstr "生成相对 pc 的代码"

#: epiphany-asm.c:456 fr30-asm.c:311 frv-asm.c:1264 ip2k-asm.c:512
#: iq2000-asm.c:460 lm32-asm.c:350 m32c-asm.c:1585 m32r-asm.c:329
#: mep-asm.c:1286 mt-asm.c:596 or1k-asm.c:576 xstormy16-asm.c:277
#, fuzzy, c-format
msgid "internal error: unrecognized field %d while parsing"
msgstr "打印 insn 时遇到无法识别的字段 %d。\n"

#: epiphany-asm.c:508 fr30-asm.c:363 frv-asm.c:1316 ip2k-asm.c:564
#: iq2000-asm.c:512 lm32-asm.c:402 m32c-asm.c:1637 m32r-asm.c:381
#: mep-asm.c:1338 mt-asm.c:648 or1k-asm.c:628 xstormy16-asm.c:329
msgid "missing mnemonic in syntax string"
msgstr "语法字符串中没有助记符"

#. We couldn't parse it.
#: epiphany-asm.c:643 epiphany-asm.c:647 epiphany-asm.c:736 epiphany-asm.c:843
#: fr30-asm.c:498 fr30-asm.c:502 fr30-asm.c:591 fr30-asm.c:698 frv-asm.c:1451
#: frv-asm.c:1455 frv-asm.c:1544 frv-asm.c:1651 ip2k-asm.c:699 ip2k-asm.c:703
#: ip2k-asm.c:792 ip2k-asm.c:899 iq2000-asm.c:647 iq2000-asm.c:651
#: iq2000-asm.c:740 iq2000-asm.c:847 lm32-asm.c:537 lm32-asm.c:541
#: lm32-asm.c:630 lm32-asm.c:737 m32c-asm.c:1772 m32c-asm.c:1776
#: m32c-asm.c:1865 m32c-asm.c:1972 m32r-asm.c:516 m32r-asm.c:520 m32r-asm.c:609
#: m32r-asm.c:716 mep-asm.c:1473 mep-asm.c:1477 mep-asm.c:1566 mep-asm.c:1673
#: mt-asm.c:783 mt-asm.c:787 mt-asm.c:876 mt-asm.c:983 or1k-asm.c:763
#: or1k-asm.c:767 or1k-asm.c:856 or1k-asm.c:963 xstormy16-asm.c:464
#: xstormy16-asm.c:468 xstormy16-asm.c:557 xstormy16-asm.c:664
msgid "unrecognized instruction"
msgstr "无法识别的指令"

#: epiphany-asm.c:690 fr30-asm.c:545 frv-asm.c:1498 ip2k-asm.c:746
#: iq2000-asm.c:694 lm32-asm.c:584 m32c-asm.c:1819 m32r-asm.c:563
#: mep-asm.c:1520 mt-asm.c:830 or1k-asm.c:810 xstormy16-asm.c:511
#, c-format
msgid "syntax error (expected char `%c', found `%c')"
msgstr "语法错误(需要字符‘%c’，得到‘%c’)"

#: epiphany-asm.c:700 fr30-asm.c:555 frv-asm.c:1508 ip2k-asm.c:756
#: iq2000-asm.c:704 lm32-asm.c:594 m32c-asm.c:1829 m32r-asm.c:573
#: mep-asm.c:1530 mt-asm.c:840 or1k-asm.c:820 xstormy16-asm.c:521
#, c-format
msgid "syntax error (expected char `%c', found end of instruction)"
msgstr "语法错误(需要字符‘%c’，却到达指令尾)"

#: epiphany-asm.c:730 fr30-asm.c:585 frv-asm.c:1538 ip2k-asm.c:786
#: iq2000-asm.c:734 lm32-asm.c:624 m32c-asm.c:1859 m32r-asm.c:603
#: mep-asm.c:1560 mt-asm.c:870 or1k-asm.c:850 xstormy16-asm.c:551
msgid "junk at end of line"
msgstr "行尾有垃圾字符"

#: epiphany-asm.c:842 fr30-asm.c:697 frv-asm.c:1650 ip2k-asm.c:898
#: iq2000-asm.c:846 lm32-asm.c:736 m32c-asm.c:1971 m32r-asm.c:715
#: mep-asm.c:1672 mt-asm.c:982 or1k-asm.c:962 xstormy16-asm.c:663
msgid "unrecognized form of instruction"
msgstr "无法识别的指令格式"

#: epiphany-asm.c:856 fr30-asm.c:711 frv-asm.c:1664 ip2k-asm.c:912
#: iq2000-asm.c:860 lm32-asm.c:750 m32c-asm.c:1985 m32r-asm.c:729
#: mep-asm.c:1686 mt-asm.c:996 or1k-asm.c:976 xstormy16-asm.c:677
#, c-format
msgid "bad instruction `%.50s...'"
msgstr "错误的指令‘%.50s...’"

#: epiphany-asm.c:859 fr30-asm.c:714 frv-asm.c:1667 ip2k-asm.c:915
#: iq2000-asm.c:863 lm32-asm.c:753 m32c-asm.c:1988 m32r-asm.c:732
#: mep-asm.c:1689 mt-asm.c:999 or1k-asm.c:979 xstormy16-asm.c:680
#, c-format
msgid "bad instruction `%.50s'"
msgstr "错误的指令‘%.50s’"

#: epiphany-desc.c:2110
#, c-format
msgid "internal error: epiphany_cgen_rebuild_tables: conflicting insn-chunk-bitsize values: `%d' vs. `%d'"
msgstr ""

#: epiphany-desc.c:2198
#, c-format
msgid "internal error: epiphany_cgen_cpu_open: unsupported argument `%d'"
msgstr ""

#: epiphany-desc.c:2217
#, c-format
msgid "internal error: epiphany_cgen_cpu_open: no endianness specified"
msgstr ""

#. Default text to print if an instruction isn't recognized.
#: epiphany-dis.c:41 fr30-dis.c:41 frv-dis.c:41 ip2k-dis.c:41 iq2000-dis.c:41
#: lm32-dis.c:41 m32c-dis.c:41 m32r-dis.c:41 mep-dis.c:41 mmix-dis.c:293
#: mt-dis.c:41 nds32-dis.c:64 or1k-dis.c:41 xstormy16-dis.c:41
msgid "*unknown*"
msgstr "*未知*"

#: epiphany-dis.c:279 fr30-dis.c:300 frv-dis.c:397 ip2k-dis.c:289
#: iq2000-dis.c:190 lm32-dis.c:148 m32c-dis.c:892 m32r-dis.c:280 mep-dis.c:1202
#: mt-dis.c:288 or1k-dis.c:175 xstormy16-dis.c:169
#, fuzzy, c-format
#| msgid "Unrecognized field %d while printing insn.\n"
msgid "internal error: unrecognized field %d while printing insn"
msgstr "打印 insn 时遇到无法识别的字段 %d。\n"

#: epiphany-ibld.c:166 fr30-ibld.c:166 frv-ibld.c:166 ip2k-ibld.c:166
#: iq2000-ibld.c:166 lm32-ibld.c:166 m32c-ibld.c:166 m32r-ibld.c:166
#: mep-ibld.c:166 mt-ibld.c:166 or1k-ibld.c:166 xstormy16-ibld.c:166
#, c-format
msgid "operand out of range (%ld not between %ld and %lu)"
msgstr "操作数越界 (%ld 不在 %ld 和 %lu 之间)"

#: epiphany-ibld.c:187 fr30-ibld.c:187 frv-ibld.c:187 ip2k-ibld.c:187
#: iq2000-ibld.c:187 lm32-ibld.c:187 m32c-ibld.c:187 m32r-ibld.c:187
#: mep-ibld.c:187 mt-ibld.c:187 or1k-ibld.c:187 xstormy16-ibld.c:187
#, fuzzy, c-format
#| msgid "operand out of range (%lu not between 0 and %lu)"
msgid "operand out of range (0x%lx not between 0 and 0x%lx)"
msgstr "操作数超出范围 (0x %lx 请不是 0 和 0x %lx 之间)"

#: epiphany-ibld.c:885 fr30-ibld.c:740 frv-ibld.c:866 ip2k-ibld.c:617
#: iq2000-ibld.c:723 lm32-ibld.c:644 m32c-ibld.c:1741 m32r-ibld.c:675
#: mep-ibld.c:1218 mt-ibld.c:759 or1k-ibld.c:738 xstormy16-ibld.c:688
#, fuzzy, c-format
#| msgid "Unrecognized field %d while building insn.\n"
msgid "internal error: unrecognized field %d while building insn"
msgstr "建立 insn 时遇到无法识别的字段 %d。\n"

#: epiphany-ibld.c:1180 fr30-ibld.c:946 frv-ibld.c:1184 ip2k-ibld.c:693
#: iq2000-ibld.c:899 lm32-ibld.c:749 m32c-ibld.c:2903 m32r-ibld.c:813
#: mep-ibld.c:1818 mt-ibld.c:980 or1k-ibld.c:897 xstormy16-ibld.c:835
#, fuzzy, c-format
#| msgid "Unrecognized field %d while decoding insn.\n"
msgid "internal error: unrecognized field %d while decoding insn"
msgstr "解码 insn 时遇到无法识别的字段 %d。\n"

#: epiphany-ibld.c:1324 fr30-ibld.c:1093 frv-ibld.c:1463 ip2k-ibld.c:768
#: iq2000-ibld.c:1031 lm32-ibld.c:839 m32c-ibld.c:3521 m32r-ibld.c:927
#: mep-ibld.c:2289 mt-ibld.c:1181 or1k-ibld.c:993 xstormy16-ibld.c:946
#, fuzzy, c-format
#| msgid "Unrecognized field %d while getting int operand.\n"
msgid "internal error: unrecognized field %d while getting int operand"
msgstr "获得 int 操作数时遇到无法识别的字段 %d。\n"

#: epiphany-ibld.c:1450 fr30-ibld.c:1222 frv-ibld.c:1724 ip2k-ibld.c:825
#: iq2000-ibld.c:1145 lm32-ibld.c:911 m32c-ibld.c:4121 m32r-ibld.c:1023
#: mep-ibld.c:2742 mt-ibld.c:1364 or1k-ibld.c:1071 xstormy16-ibld.c:1039
#, fuzzy, c-format
#| msgid "Unrecognized field %d while getting vma operand.\n"
msgid "internal error: unrecognized field %d while getting vma operand"
msgstr "获得 vma 操作数时遇到无法识别的字段 %d。\n"

#: epiphany-ibld.c:1583 fr30-ibld.c:1354 frv-ibld.c:1992 ip2k-ibld.c:885
#: iq2000-ibld.c:1266 lm32-ibld.c:990 m32c-ibld.c:4709 m32r-ibld.c:1125
#: mep-ibld.c:3156 mt-ibld.c:1554 or1k-ibld.c:1156 xstormy16-ibld.c:1139
#, fuzzy, c-format
#| msgid "Unrecognized field %d while setting int operand.\n"
msgid "internal error: unrecognized field %d while setting int operand"
msgstr "设置 int 操作数时遇到无法识别的字段 %d。\n"

#: epiphany-ibld.c:1706 fr30-ibld.c:1476 frv-ibld.c:2250 ip2k-ibld.c:935
#: iq2000-ibld.c:1377 lm32-ibld.c:1059 m32c-ibld.c:5287 m32r-ibld.c:1217
#: mep-ibld.c:3560 mt-ibld.c:1734 or1k-ibld.c:1231 xstormy16-ibld.c:1229
#, fuzzy, c-format
#| msgid "Unrecognized field %d while setting vma operand.\n"
msgid "internal error: unrecognized field %d while setting vma operand"
msgstr "设置 vma 操作数时遇到无法识别的字段 %d。\n"

#: fr30-asm.c:93 m32c-asm.c:872 m32c-asm.c:879
msgid "Register number is not valid"
msgstr "寄存器数字无效"

#: fr30-asm.c:95
msgid "Register must be between r0 and r7"
msgstr "寄存器必须 r0 和 r7 之间"

#: fr30-asm.c:97
msgid "Register must be between r8 and r15"
msgstr "寄存器必须 r8 和 r15 之间"

#: fr30-asm.c:116 m32c-asm.c:910
msgid "Register list is not valid"
msgstr "寄存器列表无效"

#: fr30-desc.c:1587
#, c-format
msgid "internal error: fr30_cgen_rebuild_tables: conflicting insn-chunk-bitsize values: `%d' vs. `%d'"
msgstr ""

#: fr30-desc.c:1675
#, c-format
msgid "internal error: fr30_cgen_cpu_open: unsupported argument `%d'"
msgstr ""

#: fr30-desc.c:1694
#, c-format
msgid "internal error: fr30_cgen_cpu_open: no endianness specified"
msgstr ""

#: frv-asm.c:608
msgid "missing `]'"
msgstr "缺少 `]'"

#: frv-asm.c:611 frv-asm.c:621
#, fuzzy
#| msgid "immediate value is out of range"
msgid "Special purpose register number is out of range"
msgstr "专用寄存器的编号是超出范围"

#: frv-asm.c:908
#, fuzzy
msgid "Value of A operand must be 0 or 1"
msgstr "数字必须是 0 或 1"

#: frv-asm.c:944
msgid "register number must be even"
msgstr "寄存器数必须是偶数"

#: frv-desc.c:6327
#, c-format
msgid "internal error: frv_cgen_rebuild_tables: conflicting insn-chunk-bitsize values: `%d' vs. `%d'"
msgstr ""

#: frv-desc.c:6415
#, c-format
msgid "internal error: frv_cgen_cpu_open: unsupported argument `%d'"
msgstr ""

#: frv-desc.c:6434
#, c-format
msgid "internal error: frv_cgen_cpu_open: no endianness specified"
msgstr ""

#: frv-opc.c:459
#, c-format
msgid "internal error: bad vliw->next_slot value"
msgstr ""

#: frv-opc.c:769
#, fuzzy, c-format
msgid "internal error: bad major code"
msgstr "内部错误：错误的 sparc-opcode.h：“%s”，%#.8lx，%#.8lx\n"

#: frv-opc.c:819
#, c-format
msgid "internal error: bad insn unit"
msgstr ""

#: h8300-dis.c:309
#, c-format
msgid "Hmmmm 0x%x"
msgstr "咦... 0x%x"

#: h8300-dis.c:617
#, c-format
msgid "Don't understand 0x%x \n"
msgstr "无法识别 0x%x \n"

#: i386-dis.c:8432
msgid "<internal disassembler error>"
msgstr "<反汇编器内部错误>"

#: i386-dis.c:8680
#, c-format
msgid ""
"\n"
"The following i386/x86-64 specific disassembler options are supported for use\n"
"with the -M switch (multiple options should be separated by commas):\n"
msgstr ""
"\n"
"下列 i386/x86-64 特定的反汇编器选项在使用 -M 开关时可用（使用逗号分隔多个选项）：\n"

#: i386-dis.c:8684
#, c-format
msgid "  x86-64      Disassemble in 64bit mode\n"
msgstr "  x86-64      在 64 位模式下反汇编\n"

#: i386-dis.c:8685
#, c-format
msgid "  i386        Disassemble in 32bit mode\n"
msgstr "  i386        在 32 位模式下反汇编\n"

#: i386-dis.c:8686
#, c-format
msgid "  i8086       Disassemble in 16bit mode\n"
msgstr "  i8086       在 16 位模式下反汇编\n"

#: i386-dis.c:8687
#, c-format
msgid "  att         Display instruction in AT&T syntax\n"
msgstr "  att         用 AT&T 语法显示指令\n"

#: i386-dis.c:8688
#, c-format
msgid "  intel       Display instruction in Intel syntax\n"
msgstr "  intel       用 Intel 语法显示指令\n"

#: i386-dis.c:8689
#, fuzzy, c-format
msgid ""
"  att-mnemonic  (AT&T syntax only)\n"
"              Display instruction with AT&T mnemonic\n"
msgstr "  att         用 AT&T 语法显示指令\n"

#: i386-dis.c:8691
#, fuzzy, c-format
msgid ""
"  intel-mnemonic  (AT&T syntax only)\n"
"              Display instruction with Intel mnemonic\n"
msgstr "  intel       用 Intel 语法显示指令\n"

#: i386-dis.c:8693
#, c-format
msgid "  addr64      Assume 64bit address size\n"
msgstr "  addr64      假定 64 位地址大小\n"

#: i386-dis.c:8694
#, c-format
msgid "  addr32      Assume 32bit address size\n"
msgstr "  addr32      假定 32 位地址大小\n"

#: i386-dis.c:8695
#, c-format
msgid "  addr16      Assume 16bit address size\n"
msgstr "  addr16      假定 16 位地址大小\n"

#: i386-dis.c:8696
#, c-format
msgid "  data32      Assume 32bit data size\n"
msgstr "  data32      假定 32 位数据大小\n"

#: i386-dis.c:8697
#, c-format
msgid "  data16      Assume 16bit data size\n"
msgstr "  data16      假定 16 位数据大小\n"

#: i386-dis.c:8698
#, c-format
msgid "  suffix      Always display instruction suffix in AT&T syntax\n"
msgstr "  suffix      在 AT&T 语法中始终显示指令后缀\n"

#: i386-dis.c:8699
#, fuzzy, c-format
#| msgid "  att         Display instruction in AT&T syntax\n"
msgid "  amd64       Display instruction in AMD64 ISA\n"
msgstr "  att         用 AT&T 语法显示指令\n"

#: i386-dis.c:8700
#, fuzzy, c-format
#| msgid "  intel       Display instruction in Intel syntax\n"
msgid "  intel64     Display instruction in Intel64 ISA\n"
msgstr "  intel       用 Intel 语法显示指令\n"

#: i386-dis.c:9447
msgid "64-bit address is disabled"
msgstr "64 位地址已禁用"

#. We've been passed a w.  Return with an error message so that
#. cgen will try the next parsing option.
#: ip2k-asm.c:81
msgid "W keyword invalid in FR operand slot."
msgstr "W 关键字非法，在 FR 操作数槽位中。"

#. Invalid offset present.
#: ip2k-asm.c:106
msgid "offset(IP) is not a valid form"
msgstr "偏移量（IP）不是合法格式"

#. Found something there in front of (DP) but it's out
#. of range.
#: ip2k-asm.c:154
msgid "(DP) offset out of range."
msgstr "(DP) 偏移量越界"

#. Found something there in front of (SP) but it's out
#. of range.
#: ip2k-asm.c:195
msgid "(SP) offset out of range."
msgstr "(SP) 偏移量越界。"

#: ip2k-asm.c:211
msgid "illegal use of parentheses"
msgstr "括号用法非法"

#: ip2k-asm.c:218
#, fuzzy
msgid "operand out of range (not between 1 and 255)"
msgstr "操作数越界(%ld 不在 %ld 和 %ld 之间)"

#. Something is very wrong. opindex has to be one of the above.
#: ip2k-asm.c:242
#, fuzzy
msgid "parse_addr16: invalid opindex."
msgstr "无效的‘asm’："

#: ip2k-asm.c:296
msgid "Byte address required. - must be even."
msgstr ""

#: ip2k-asm.c:305
msgid "cgen_parse_address returned a symbol. Literal required."
msgstr ""

#: ip2k-asm.c:360
#, fuzzy
msgid "percent-operator operand is not a symbol"
msgstr "%%L处的 .not. 运算符的操作数为 %s"

#: ip2k-asm.c:413
msgid "Attempt to find bit index of 0"
msgstr ""

#: ip2k-desc.c:1016
#, c-format
msgid "internal error: ip2k_cgen_rebuild_tables: conflicting insn-chunk-bitsize values: `%d' vs. `%d'"
msgstr ""

#: ip2k-desc.c:1104
#, c-format
msgid "internal error: ip2k_cgen_cpu_open: unsupported argument `%d'"
msgstr ""

#: ip2k-desc.c:1123
#, c-format
msgid "internal error: ip2k_cgen_cpu_open: no endianness specified"
msgstr ""

#: iq2000-asm.c:112 iq2000-asm.c:142
msgid "immediate value cannot be register"
msgstr "立即数不能是寄存器"

#: iq2000-asm.c:123 iq2000-asm.c:153 lm32-asm.c:70
msgid "immediate value out of range"
msgstr "立即数越界"

#: iq2000-asm.c:182
msgid "21-bit offset out of range"
msgstr "21位长的偏移量越界"

#: iq2000-desc.c:2021
#, c-format
msgid "internal error: iq2000_cgen_rebuild_tables: conflicting insn-chunk-bitsize values: `%d' vs. `%d'"
msgstr ""

#: iq2000-desc.c:2109
#, c-format
msgid "internal error: iq2000_cgen_cpu_open: unsupported argument `%d'"
msgstr ""

#: iq2000-desc.c:2128
#, c-format
msgid "internal error: iq2000_cgen_cpu_open: no endianness specified"
msgstr ""

#: kvx-dis.c:1571
#, fuzzy, c-format
#| msgid ""
#| "\n"
#| "The following MIPS specific disassembler options are supported for use\n"
#| "with the -M switch (multiple options should be separated by commas):\n"
msgid ""
"\n"
"The following KVX specific disassembler options are supported for use\n"
"with the -M switch (multiple options should be separated by commas):\n"
msgstr ""
"\n"
"下列 MIPS 特定的反汇编器选项可通过 -M 开关启用（使用逗号分隔多个选项）：\n"

#: kvx-dis.c:1575
#, c-format
msgid ""
"\n"
"  pretty               Print 32-bit words in natural order corresponding to re-ordered instruction.\n"
msgstr ""

#: kvx-dis.c:1579
#, c-format
msgid ""
"\n"
"  compact-assembly     Do not emit a new line between bundles of instructions.\n"
msgstr ""

#: kvx-dis.c:1583
#, c-format
msgid ""
"\n"
"  no-compact-assembly  Emit a new line between bundles of instructions.\n"
msgstr ""

#: lm32-asm.c:166
#, fuzzy
msgid "expecting gp relative address: gp(symbol)"
msgstr "不能使用非 GP 相对的绝对地址"

#: lm32-asm.c:196
msgid "expecting got relative address: got(symbol)"
msgstr ""

#: lm32-asm.c:226
msgid "expecting got relative address: gotoffhi16(symbol)"
msgstr ""

#: lm32-asm.c:256
msgid "expecting got relative address: gotofflo16(symbol)"
msgstr ""

#: lm32-desc.c:1003
#, c-format
msgid "internal error: lm32_cgen_rebuild_tables: conflicting insn-chunk-bitsize values: `%d' vs. `%d'"
msgstr ""

#: lm32-desc.c:1091
#, c-format
msgid "internal error: lm32_cgen_cpu_open: unsupported argument `%d'"
msgstr ""

#: lm32-desc.c:1110
#, c-format
msgid "internal error: lm32_cgen_cpu_open: no endianness specified"
msgstr ""

#: loongarch-dis.c:329
#, fuzzy, c-format
#| msgid ""
#| "\n"
#| "The following MIPS specific disassembler options are supported for use\n"
#| "with the -M switch (multiple options should be separated by commas):\n"
msgid ""
"\n"
"The following LoongArch disassembler options are supported for use\n"
"with the -M switch (multiple options should be separated by commas):\n"
msgstr ""
"\n"
"下列 MIPS 特定的反汇编器选项可通过 -M 开关启用（使用逗号分隔多个选项）：\n"

#: loongarch-dis.c:333
#, fuzzy, c-format
#| msgid ""
#| "\n"
#| "  aliases            Do print instruction aliases.\n"
msgid ""
"\n"
"    no-aliases    Use canonical instruction forms.\n"
msgstr ""
"\n"
"  aliases            要打印指令别名。\n"

#: loongarch-dis.c:335
#, c-format
msgid ""
"\n"
"    numeric       Print numeric register names, rather than ABI names.\n"
msgstr ""

#: m10200-dis.c:151 m10300-dis.c:574
#, c-format
msgid "unknown\t0x%04lx"
msgstr "未知\t0x%04lx"

#: m10200-dis.c:321
#, c-format
msgid "unknown\t0x%02lx"
msgstr "未知\t0x%02lx"

#: m32c-asm.c:117
msgid "imm:6 immediate is out of range"
msgstr "imm:6 立即数越界"

#: m32c-asm.c:145
#, c-format
msgid "%dsp8() takes a symbolic address, not a number"
msgstr "%dsp8() 使用一个符号地址，而非数字"

#: m32c-asm.c:159 m32c-asm.c:163 m32c-asm.c:253
msgid "dsp:8 immediate is out of range"
msgstr "dsp:8 立即数越界"

#: m32c-asm.c:184 m32c-asm.c:188
msgid "Immediate is out of range -8 to 7"
msgstr "立即数越界 (-8 到 7)"

#: m32c-asm.c:209 m32c-asm.c:213
msgid "Immediate is out of range -7 to 8"
msgstr "立即数越界 (-7 到 8)"

#: m32c-asm.c:281
#, c-format
msgid "%dsp16() takes a symbolic address, not a number"
msgstr "%dsp16() 使用一个符号地址，而非数字"

#: m32c-asm.c:305 m32c-asm.c:312 m32c-asm.c:373
msgid "dsp:16 immediate is out of range"
msgstr "dsp:16 立即数越界"

#: m32c-asm.c:399
msgid "dsp:20 immediate is out of range"
msgstr "dsp:20 立即数越界"

#: m32c-asm.c:425 m32c-asm.c:445
msgid "dsp:24 immediate is out of range"
msgstr "dsp:24 立即数越界"

#: m32c-asm.c:478
msgid "immediate is out of range 1-2"
msgstr "立即数越界 1-2"

#: m32c-asm.c:496
msgid "immediate is out of range 1-8"
msgstr "立即数越界 1-8"

#: m32c-asm.c:514
msgid "immediate is out of range 0-7"
msgstr "立即数越界 0-7"

#: m32c-asm.c:550
msgid "immediate is out of range 2-9"
msgstr "立即数越界 2-9"

#: m32c-asm.c:568
msgid "Bit number for indexing general register is out of range 0-15"
msgstr ""

#: m32c-asm.c:606 m32c-asm.c:662
#, fuzzy
#| msgid "immediate value is out of range"
msgid "bit,base is out of range"
msgstr "立即数越界"

#: m32c-asm.c:613 m32c-asm.c:618 m32c-asm.c:666
#, fuzzy
#| msgid "21-bit offset out of range"
msgid "bit,base out of range for symbol"
msgstr "21位长的偏移量越界"

#: m32c-asm.c:802
#, fuzzy
msgid "not a valid r0l/r0h pair"
msgstr "有效的参数为：\n"

#: m32c-asm.c:832
#, fuzzy
#| msgid "invalid mask field"
msgid "Invalid size specifier"
msgstr "%s：无效的新列指定符号“%s”\n"

#: m32c-desc.c:63034
#, c-format
msgid "internal error: m32c_cgen_rebuild_tables: conflicting insn-chunk-bitsize values: `%d' vs. `%d'"
msgstr ""

#: m32c-desc.c:63122
#, c-format
msgid "internal error: m32c_cgen_cpu_open: unsupported argument `%d'"
msgstr ""

#: m32c-desc.c:63141
#, c-format
msgid "internal error: m32c_cgen_cpu_open: no endianness specified"
msgstr ""

#: m32r-desc.c:1366
#, c-format
msgid "internal error: m32r_cgen_rebuild_tables: conflicting insn-chunk-bitsize values: `%d' vs. `%d'"
msgstr ""

#: m32r-desc.c:1454
#, c-format
msgid "internal error: m32r_cgen_cpu_open: unsupported argument `%d'"
msgstr ""

#: m32r-desc.c:1473
#, c-format
msgid "internal error: m32r_cgen_cpu_open: no endianness specified"
msgstr ""

#: m68k-dis.c:1403
#, c-format
msgid "<function code %d>"
msgstr "<函数代码 %d>"

#: m68k-dis.c:1567
#, c-format
msgid "<internal error in opcode table: %s %s>\n"
msgstr "<操作数表中出现内部错误：%s %s>\n"

#: mep-asm.c:129
msgid "Only $tp or $13 allowed for this opcode"
msgstr ""

#: mep-asm.c:143
msgid "Only $sp or $15 allowed for this opcode"
msgstr ""

#: mep-asm.c:308 mep-asm.c:504
#, fuzzy, c-format
msgid "invalid %function() here"
msgstr "%qE未声明(不在函数内)"

#: mep-asm.c:336
msgid "Immediate is out of range -32768 to 32767"
msgstr "立即数越界 (-32768 到 32767)"

#: mep-asm.c:356
msgid "Immediate is out of range 0 to 65535"
msgstr "立即数越界 (0 到 65535)"

#: mep-asm.c:549 mep-asm.c:562
msgid "Immediate is out of range -512 to 511"
msgstr "立即数越界 (-512 到 511)"

#: mep-asm.c:554 mep-asm.c:563
msgid "Immediate is out of range -128 to 127"
msgstr "立即数越界 (-128 到 127)"

#: mep-asm.c:558
msgid "Value is not aligned enough"
msgstr "数值对齐程度不够"

#: mep-desc.c:6227
#, c-format
msgid "internal error: mep_cgen_rebuild_tables: conflicting insn-chunk-bitsize values: `%d' vs. `%d'"
msgstr ""

#: mep-desc.c:6315
#, c-format
msgid "internal error: mep_cgen_cpu_open: unsupported argument `%d'"
msgstr ""

#: mep-desc.c:6334
#, c-format
msgid "internal error: mep_cgen_cpu_open: no endianness specified"
msgstr ""

#: mep-dis.c:662
#, c-format
msgid "illegal MEP INDEX setting '%x' in ELF header e_flags field"
msgstr ""

#: mips-dis.c:1907 mips-dis.c:2140
#, fuzzy, c-format
#| msgid "# internal error, undefined modifier(%c)"
msgid "# internal error, undefined operand in `%s %s'"
msgstr "<操作数表中出现内部错误：%s %s>\n"

#: mips-dis.c:2745
#, fuzzy
#| msgid ""
#| "\n"
#| "  aliases            Do print instruction aliases.\n"
msgid "Use canonical instruction forms.\n"
msgstr ""
"\n"
"  aliases            要打印指令别名。\n"

#: mips-dis.c:2747
#, fuzzy
#| msgid "unrecognized instruction"
msgid "Recognize MSA instructions.\n"
msgstr "无法识别的指令"

#: mips-dis.c:2749
#, fuzzy
#| msgid ""
#| "\n"
#| "  virt            Recognize the virtualization ASE instructions.\n"
msgid "Recognize the virtualization ASE instructions.\n"
msgstr ""
"\n"
"  virt            识别虚拟化 ASE 指令。\n"

#: mips-dis.c:2751
msgid ""
"Recognize the eXtended Physical Address (XPA) ASE\n"
"                  instructions.\n"
msgstr ""

#: mips-dis.c:2754
msgid "Recognize the Global INValidate (GINV) ASE instructions.\n"
msgstr ""

#: mips-dis.c:2758
msgid "Recognize the Loongson MultiMedia extensions Instructions (MMI) ASE instructions.\n"
msgstr ""

#: mips-dis.c:2762
msgid "Recognize the Loongson Content Address Memory (CAM)  instructions.\n"
msgstr ""

#: mips-dis.c:2766
msgid "Recognize the Loongson EXTensions (EXT)  instructions.\n"
msgstr ""

#: mips-dis.c:2770
msgid "Recognize the Loongson EXTensions R2 (EXT2)  instructions.\n"
msgstr ""

#: mips-dis.c:2773
#, fuzzy
#| msgid ""
#| "\n"
#| "  gpr-names=ABI            Print GPR names according to  specified ABI.\n"
#| "                           Default: based on binary being disassembled.\n"
msgid ""
"Print GPR names according to specified ABI.\n"
"                  Default: based on binary being disassembled.\n"
msgstr ""
"\n"
"  gpr-names=ABI            根据指定的 ABI 打印通用寄存器名。\n"
"                           默认：根据被反汇编的二进制文件。\n"

#: mips-dis.c:2776
#, fuzzy
#| msgid ""
#| "\n"
#| "  fpr-names=ABI            Print FPR names according to specified ABI.\n"
#| "                           Default: numeric.\n"
msgid ""
"Print FPR names according to specified ABI.\n"
"                  Default: numeric.\n"
msgstr ""
"\n"
"  fpr-names=ABI            根据指定的 ABI 打印浮点寄存器名。\n"
"                           默认：数字。\n"

#: mips-dis.c:2779
#, fuzzy
#| msgid ""
#| "\n"
#| "  cp0-names=ARCH           Print CP0 register names according to\n"
#| "                           specified architecture.\n"
#| "                           Default: based on binary being disassembled.\n"
msgid ""
"Print CP0 register names according to specified architecture.\n"
"                  Default: based on binary being disassembled.\n"
msgstr ""
"\n"
"  cp0-names=ARCH           根据指定的架构打印 CP0 寄存器名。\n"
"                           默认：根据被反汇编的二进制代码。\n"

#: mips-dis.c:2783
#, fuzzy
#| msgid ""
#| "\n"
#| "  gpr-names=ABI            Print GPR names according to  specified ABI.\n"
#| "                           Default: based on binary being disassembled.\n"
msgid ""
"Print HWR names according to specified architecture.\n"
"                  Default: based on binary being disassembled.\n"
msgstr ""
"\n"
"  gpr-names=ABI            根据指定的 ABI 打印通用寄存器名。\n"
"                           默认：根据被反汇编的二进制文件。\n"

#: mips-dis.c:2786
#, fuzzy
#| msgid ""
#| "\n"
#| "  reg-names=ABI            Print GPR and FPR names according to\n"
#| "                           specified ABI.\n"
msgid "Print GPR and FPR names according to specified ABI.\n"
msgstr ""
"\n"
"  reg-names=ABI            根据指定的 ABI 打印通用寄存器和浮点寄存\n"
"                           器名。\n"

#: mips-dis.c:2788
#, fuzzy
#| msgid ""
#| "\n"
#| "  reg-names=ARCH           Print CP0 register and HWR names according to\n"
#| "                           specified architecture.\n"
msgid ""
"Print CP0 register and HWR names according to specified\n"
"                  architecture."
msgstr ""
"\n"
"  reg-names=ARCH           根据指定的架构打印 CP0 和 HWR 寄存器名。\n"

#: mips-dis.c:2874
#, fuzzy, c-format
#| msgid ""
#| "\n"
#| "The following MIPS specific disassembler options are supported for use\n"
#| "with the -M switch (multiple options should be separated by commas):\n"
msgid ""
"\n"
"The following MIPS specific disassembler options are supported for use\n"
"with the -M switch (multiple options should be separated by commas):\n"
"\n"
msgstr ""
"\n"
"下列 MIPS 特定的反汇编器选项可通过 -M 开关启用（使用逗号分隔多个选项）：\n"

#: mmix-dis.c:33
#, fuzzy, c-format
msgid "bad case %d (%s) in %s:%d"
msgstr "行 %d: 不当的 no%s 数字：%d\n"

#: mmix-dis.c:42
#, c-format
msgid "internal: non-debugged code (test-case missing): %s:%d"
msgstr ""

#: mmix-dis.c:52
msgid "(unknown)"
msgstr "(未知)"

#: mmix-dis.c:247 mmix-dis.c:255
msgid "*illegal*"
msgstr ""

#: mmix-dis.c:529
#, fuzzy, c-format
msgid "*unknown operands type: %d*"
msgstr "%s：未知的重定位类型 %d"

#: msp430-decode.opc:145 rl78-decode.opc:106
#, c-format
msgid "internal error: immediate() called with invalid byte count %d"
msgstr ""

#: msp430-dis.c:59
#, c-format
msgid "Warning: disassembly unreliable - not enough bytes available"
msgstr "警告：反汇编不可靠 - 没有足够的可用字节"

#: msp430-dis.c:65
#, c-format
msgid "Error: read from memory failed"
msgstr "错误：从内存读取失败"

#: msp430-dis.c:499
#, fuzzy
msgid "Warning: illegal as emulation instr"
msgstr "不要使用 fabss 自定义指令"

#. R2/R3 are illegal as dest: may be data section.
#: msp430-dis.c:591
#, fuzzy
msgid "Warning: illegal as 2-op instr"
msgstr "不要使用 fabss 自定义指令"

#: msp430-dis.c:1002
#, fuzzy
msgid "Warning: unrecognised CALLA addressing mode"
msgstr "无效寻址模式"

#: msp430-dis.c:1303 msp430-dis.c:1324 msp430-dis.c:1345
#, c-format
msgid "Warning: reserved use of A/L and B/W bits detected"
msgstr ""

#: mt-asm.c:110 mt-asm.c:190
#, fuzzy
msgid "Operand out of range. Must be between -32768 and 32767."
msgstr "操作数越界(%lu 不在 0 和 %lu 之间)"

#: mt-asm.c:149
msgid "Biiiig Trouble in parse_imm16!"
msgstr ""

#: mt-asm.c:157
#, fuzzy
msgid "The percent-operator's operand is not a symbol"
msgstr "%%L处的 .not. 运算符的操作数为 %s"

#: mt-asm.c:395
msgid "invalid operand.  type may have values 0,1,2 only."
msgstr ""

#: mt-desc.c:1147
#, c-format
msgid "internal error: mt_cgen_rebuild_tables: conflicting insn-chunk-bitsize values: `%d' vs. `%d'"
msgstr ""

#: mt-desc.c:1235
#, c-format
msgid "internal error: mt_cgen_cpu_open: unsupported argument `%d'"
msgstr ""

#: mt-desc.c:1254
#, c-format
msgid "internal error: mt_cgen_cpu_open: no endianness specified"
msgstr ""

#: nds32-asm.c:1760
#, fuzzy, c-format
#| msgid "# internal error, undefined modifier(%c)"
msgid "internal error: unknown operand, %s"
msgstr "<操作数表中出现内部错误：%s %s>\n"

#: nds32-asm.c:2396
#, c-format
msgid "internal error: don't know how to handle parsing results"
msgstr ""

#: nds32-asm.c:2404
#, c-format
msgid "internal error: unknown hardware resource"
msgstr ""

#: nds32-dis.c:1178
msgid "insufficient data to decode instruction"
msgstr ""

#: nfp-dis.c:930
#, fuzzy
#| msgid "<illegal precision>"
msgid "<invalid_instruction>:"
msgstr "非法操作"

#: nfp-dis.c:1334
#, fuzzy
#| msgid "invalid shift operator"
msgid ", <invalid CRC operator>, "
msgstr "无效的移位操作符"

#: nfp-dis.c:1686
#, fuzzy
msgid "<invalid branch>["
msgstr "无效的数字。"

#: nfp-dis.c:2055 nfp-dis.c:2326
#, c-format
msgid "<invalid cmd target %d:%d:%d>[]"
msgstr ""

#: nfp-dis.c:2066 nfp-dis.c:2337
#, c-format
msgid "<invalid cmd action %d:%d:%d>[]"
msgstr ""

#: nfp-dis.c:2558
msgid "File has no ME-Config section."
msgstr ""

#: nfp-dis.c:2572
msgid "File has invalid ME-Config section."
msgstr ""

#: nfp-dis.c:2719
#, c-format
msgid "Error processing section %u "
msgstr ""

#: nfp-dis.c:2748
#, c-format
msgid "Invalid NFP option: %s"
msgstr ""

#: nfp-dis.c:2986
#, fuzzy, c-format
#| msgid ""
#| "\n"
#| "The following MIPS specific disassembler options are supported for use\n"
#| "with the -M switch (multiple options should be separated by commas):\n"
msgid ""
"\n"
"The following NFP specific disassembler options are supported for use\n"
"with the -M switch (multiple options should be separated by commas):\n"
msgstr ""
"\n"
"下列 MIPS 特定的反汇编器选项可通过 -M 开关启用（使用逗号分隔多个选项）：\n"

#: nfp-dis.c:2990
#, c-format
msgid ""
"\n"
"  no-pc\t\t    Don't print program counter prefix.\n"
"  ctx4\t\t    Force disassembly using 4-context mode.\n"
"  ctx8\t\t    Force 8-context mode, takes precedence."
msgstr ""

#: nios2-dis.c:135
#, c-format
msgid "out of memory"
msgstr ""

#: nios2-dis.c:263
#, fuzzy, c-format
#| msgid "<internal error in opcode table: %s %s>\n"
msgid "internal error: broken opcode descriptor for `%s %s'"
msgstr "<操作数表中出现内部错误：%s %s>\n"

#. I and Z are output operands and can`t be immediate
#. A is an address and we can`t have the address of
#. an immediate either. We don't know how much to increase
#. aoffsetp by since whatever generated this is broken
#. anyway!
#: ns32k-dis.c:533
#, c-format
msgid "$<undefined>"
msgstr "$<未定义>"

#: or1k-asm.c:55
msgid "relocation invalid for store"
msgstr ""

#: or1k-asm.c:56
msgid "internal relocation type invalid"
msgstr ""

#: or1k-desc.c:2041
#, c-format
msgid "internal error: or1k_cgen_rebuild_tables: conflicting insn-chunk-bitsize values: `%d' vs. `%d'"
msgstr ""

#: or1k-desc.c:2129
#, c-format
msgid "internal error: or1k_cgen_cpu_open: unsupported argument `%d'"
msgstr ""

#: or1k-desc.c:2148
#, c-format
msgid "internal error: or1k_cgen_cpu_open: no endianness specified"
msgstr ""

#: ppc-dis.c:418
#, fuzzy, c-format
msgid "warning: ignoring unknown -M%s option"
msgstr "警告：忽略--strip-program 选项，因为-s 选项没有指明"

#: ppc-dis.c:1256
#, c-format
msgid ""
"\n"
"The following PPC specific disassembler options are supported for use with\n"
"the -M switch:\n"
msgstr ""
"\n"
"下列 PPC 特定的反汇编器选项在使用 -M 开关时可用（使用逗号分隔多个选项）：\n"

#: ppc-opc.c:52 ppc-opc.c:75 ppc-opc.c:101 ppc-opc.c:131
msgid "invalid register"
msgstr "无效的寄存器"

#: ppc-opc.c:397
msgid "invalid conditional option"
msgstr "无效的条件选项"

#: ppc-opc.c:400
#, fuzzy
msgid "invalid counter access"
msgstr "没有访问权限"

#: ppc-opc.c:464
msgid "BO value implies no branch hint, when using + or - modifier"
msgstr ""

#: ppc-opc.c:469
msgid "attempt to set y bit when using + or - modifier"
msgstr ""

#: ppc-opc.c:471
msgid "attempt to set 'at' bits when using + or - modifier"
msgstr ""

#: ppc-opc.c:575
#, fuzzy
#| msgid "value must be in the range 1 to "
msgid "invalid offset: must be in the range [-512, -8] and be a multiple of 8"
msgstr "值的范围必须在 1 到 "

#: ppc-opc.c:706
#, fuzzy
#| msgid "invalid shift operator"
msgid "invalid R operand"
msgstr "无效的移位操作符"

#: ppc-opc.c:761
msgid "invalid mask field"
msgstr "无效的掩码字段"

#: ppc-opc.c:784
#, fuzzy
msgid "invalid mfcr mask"
msgstr "无效的掩码字段"

#: ppc-opc.c:902 ppc-opc.c:920
#, fuzzy
msgid "illegal L operand value"
msgstr "立即数"

#: ppc-opc.c:943
#, fuzzy
msgid "illegal WC operand value"
msgstr "立即数"

#: ppc-opc.c:1040
msgid "incompatible L operand value"
msgstr ""

#: ppc-opc.c:1239 ppc-opc.c:1274
msgid "illegal bitmask"
msgstr "非法的位掩码"

#: ppc-opc.c:1418
#, fuzzy
msgid "address register in load range"
msgstr "地址中无寄存器"

#: ppc-opc.c:1458
#, fuzzy
msgid "illegal PL operand value"
msgstr "立即数"

#: ppc-opc.c:1539
#, fuzzy
msgid "index register in load range"
msgstr "寄存器元素下标"

#: ppc-opc.c:1568 ppc-opc.c:1654
msgid "source and target register operands must be different"
msgstr ""

#: ppc-opc.c:1599
msgid "invalid register operand when updating"
msgstr ""

#: ppc-opc.c:1717
msgid "illegal immediate value"
msgstr "非法的立即数"

#: ppc-opc.c:2024
#, fuzzy
msgid "invalid bat number"
msgstr "无效的数字。"

#: ppc-opc.c:2059
#, fuzzy
msgid "invalid sprg number"
msgstr "无效的数字。"

#: ppc-opc.c:2096
#, fuzzy
msgid "invalid tbr number"
msgstr "无效的数字。"

#: ppc-opc.c:2203 ppc-opc.c:2271
msgid "VSR overlaps ACC operand"
msgstr ""

#: ppc-opc.c:2380
#, fuzzy
#| msgid "invalid conditional option"
msgid "invalid constant"
msgstr "%<#pragma pack%>中有无效常量 - 已忽略"

#: ppc-opc.c:2482 ppc-opc.c:2505 ppc-opc.c:2528 ppc-opc.c:2551
msgid "UIMM = 00000 is illegal"
msgstr ""

#: ppc-opc.c:2574
msgid "UIMM values >7 are illegal"
msgstr ""

#: ppc-opc.c:2597
msgid "UIMM values >15 are illegal"
msgstr ""

#: ppc-opc.c:2620
msgid "GPR odd is illegal"
msgstr ""

#: ppc-opc.c:2643 ppc-opc.c:2666
#, fuzzy
#| msgid "invalid register offset"
msgid "invalid offset"
msgstr "无效的寄存器偏移量"

#: ppc-opc.c:2689
#, fuzzy
msgid "invalid Ddd value"
msgstr "无效的数字。"

#: ppc-opc.c:2742 ppc-opc.c:2769
#, fuzzy
msgid "invalid TH value"
msgstr "无效的数字。"

#. Invalid options with '=', no option name before '=',
#. and no value after '='.
#: riscv-dis.c:128
#, fuzzy, c-format
#| msgid "Unrecognised disassembler option: %s\n"
msgid "unrecognized disassembler option with '=': %s"
msgstr "无法识别的反汇编器选项：%s\n"

#: riscv-dis.c:142
#, c-format
msgid "unknown privileged spec set by %s=%s"
msgstr ""

#: riscv-dis.c:149
#, c-format
msgid "mis-matched privilege spec set by %s=%s, the elf privilege attribute is %s"
msgstr ""

#: riscv-dis.c:763
#, fuzzy, c-format
#| msgid "# internal error, undefined modifier(%c)"
msgid "# internal error, undefined modifier (%c)"
msgstr "<操作数表中出现内部错误：%s %s>\n"

#: riscv-dis.c:1365
msgid "Print numeric register names, rather than ABI names."
msgstr ""

#: riscv-dis.c:1368
msgid "Disassemble only into canonical instructions."
msgstr ""

#: riscv-dis.c:1371
msgid "Print the CSR according to the chosen privilege spec."
msgstr ""

#: riscv-dis.c:1447
#, fuzzy, c-format
#| msgid ""
#| "\n"
#| "The following MIPS specific disassembler options are supported for use\n"
#| "with the -M switch (multiple options should be separated by commas):\n"
msgid ""
"\n"
"The following RISC-V specific disassembler options are supported for use\n"
"with the -M switch (multiple options should be separated by commas):\n"
msgstr ""
"\n"
"下列 MIPS 特定的反汇编器选项可通过 -M 开关启用（使用逗号分隔多个选项）：\n"

#: rx-dis.c:139 rx-dis.c:163 rx-dis.c:171 rx-dis.c:179 rx-dis.c:187
#, fuzzy
#| msgid "invalid register name"
msgid "<invalid register number>"
msgstr "无效寄存器名"

#: rx-dis.c:147 rx-dis.c:195
#, fuzzy
#| msgid "invalid conditional option"
msgid "<invalid condition code>"
msgstr "无效的条件选项"

#: rx-dis.c:155
#, fuzzy
msgid "<invalid flag>"
msgstr "无效的掩码字段"

#: rx-dis.c:203
#, fuzzy
#| msgid "invalid register offset"
msgid "<invalid opsize>"
msgstr "无效的寄存器偏移量"

#: rx-dis.c:211
#, fuzzy
#| msgid "invalid register offset"
msgid "<invalid size>"
msgstr "无效的寄存器偏移量"

#: s12z-dis.c:239 s12z-dis.c:296 s12z-dis.c:307
#, fuzzy
#| msgid "<illegal precision>"
msgid "<illegal reg num>"
msgstr "<非法的精度>"

#: s12z-dis.c:370
msgid "<bad>"
msgstr ""

#: s12z-dis.c:380
msgid ".<bad>"
msgstr ""

#: s390-dis.c:44
#, fuzzy
#| msgid "  esa         Disassemble in ESA architecture mode\n"
msgid "Disassemble in ESA architecture mode"
msgstr "  esa         在 ESA 架构模式下反汇编\n"

#: s390-dis.c:45
#, fuzzy
msgid "Disassemble in z/Architecture mode"
msgstr "z/Architecture 模式在 %s 上不受支持"

#: s390-dis.c:46
msgid "Print unknown instructions according to length from first two bits"
msgstr ""

#: s390-dis.c:48
msgid "Print instruction description as comment"
msgstr ""

#: s390-dis.c:82
#, fuzzy, c-format
#| msgid "Unrecognised disassembler option: %s\n"
msgid "unknown S/390 disassembler option: %s"
msgstr "无法识别的反汇编器选项：%s\n"

#: s390-dis.c:516
#, c-format
msgid ""
"\n"
"The following S/390 specific disassembler options are supported for use\n"
"with the -M switch (multiple options should be separated by commas):\n"
msgstr ""
"\n"
"\n"
"下列 S/390 特定的反汇编器选项可通过 -M 开关启用（使用逗号分隔多个选项）：\n"

#: score-dis.c:653 score-dis.c:871 score-dis.c:1032 score-dis.c:1138
#: score-dis.c:1146 score-dis.c:1153 score7-dis.c:691 score7-dis.c:854
#, fuzzy
#| msgid "<illegal precision>"
msgid "<illegal instruction>"
msgstr "非法操作"

#: sparc-dis.c:308 sparc-dis.c:318
#, fuzzy, c-format
#| msgid "Internal error: bad sparc-opcode.h: \"%s\", %#.8lx, %#.8lx\n"
msgid "internal error: bad sparc-opcode.h: \"%s\", %#.8lx, %#.8lx\n"
msgstr "内部错误：错误的 sparc-opcode.h：“%s”，%#.8lx，%#.8lx\n"

#: sparc-dis.c:377
#, fuzzy, c-format
msgid "internal error: bad sparc-opcode.h: \"%s\" == \"%s\"\n"
msgstr "内部错误：错误的 sparc-opcode.h：“%s”，%#.8lx，%#.8lx\n"

#. Mark as non-valid instruction.
#: sparc-dis.c:1094
msgid "unknown"
msgstr "未知"

#: v850-dis.c:190
#, fuzzy
msgid "<invalid s-reg number>"
msgstr "无效的数字。"

#: v850-dis.c:206
#, fuzzy
msgid "<invalid reg number>"
msgstr "无效的数字。"

#: v850-dis.c:222
#, fuzzy
msgid "<invalid v-reg number>"
msgstr "无效的数字。"

#: v850-dis.c:236
#, fuzzy
msgid "<invalid CC-reg number>"
msgstr "无效的数字。"

#: v850-dis.c:250
#, fuzzy
msgid "<invalid float-CC-reg number>"
msgstr "无效的数字。"

#: v850-dis.c:264
#, fuzzy
msgid "<invalid cacheop number>"
msgstr "无效的数字。"

#: v850-dis.c:275
#, fuzzy
msgid "<invalid prefop number>"
msgstr "无效的数字。"

#: v850-dis.c:510
#, fuzzy, c-format
msgid "unknown operand shift: %x"
msgstr "<未知>：%x"

#: v850-dis.c:526
#, fuzzy, c-format
#| msgid "unknown pop reg: %d\n"
msgid "unknown reg: %d"
msgstr "<未知>：%d"

#. The functions used to insert and extract complicated operands.
#. Note: There is a conspiracy between these functions and
#. v850_insert_operand() in gas/config/tc-v850.c.  Error messages
#. containing the string 'out of range' will be ignored unless a
#. specific command line option is given to GAS.
#: v850-opc.c:53
#, fuzzy
msgid "displacement value is not in range and is not aligned"
msgstr "偏移值越界"

#: v850-opc.c:54
msgid "displacement value is out of range"
msgstr "偏移值越界"

#: v850-opc.c:55
msgid "displacement value is not aligned"
msgstr "偏移值未对齐"

#: v850-opc.c:57
msgid "immediate value is out of range"
msgstr "立即数越界"

#: v850-opc.c:58
msgid "branch value out of range"
msgstr "跳转越界"

#: v850-opc.c:59
msgid "branch value not in range and to odd offset"
msgstr "跳转越界且跳转偏移量为奇数"

#: v850-opc.c:60
msgid "branch to odd offset"
msgstr "跳转偏移量为奇数"

#: v850-opc.c:61
#, fuzzy
#| msgid "immediate value is out of range"
msgid "position value is out of range"
msgstr "立即数越界"

#: v850-opc.c:62
#, fuzzy
#| msgid "immediate value is out of range"
msgid "width value is out of range"
msgstr "立即数越界"

#: v850-opc.c:63
#, fuzzy
#| msgid "value out of range"
msgid "SelID is out of range"
msgstr "SR/SelID 越界"

#: v850-opc.c:64
msgid "vector8 is out of range"
msgstr "vector8 越界"

#: v850-opc.c:65
msgid "vector5 is out of range"
msgstr "vector5 越界"

#: v850-opc.c:66
msgid "imm10 is out of range"
msgstr "imm10 越界"

#: v850-opc.c:67
msgid "SR/SelID is out of range"
msgstr "SR/SelID 越界"

#: v850-opc.c:508
msgid "invalid register for stack adjustment"
msgstr "用于调整堆栈的寄存器无效"

#: v850-opc.c:526
msgid "invalid register name"
msgstr "无效寄存器名"

#: wasm32-dis.c:93
#, fuzzy
#| msgid "invalid register name"
msgid "Disassemble \"register\" names"
msgstr "无效寄存器名"

#: wasm32-dis.c:94
msgid "Name well-known globals"
msgstr ""

#: wasm32-dis.c:549
#, fuzzy, c-format
#| msgid ""
#| "\n"
#| "The following ARM specific disassembler options are supported for use with\n"
#| "the -M switch:\n"
msgid ""
"The following WebAssembly-specific disassembler options are supported for use\n"
"with the -M switch:\n"
msgstr ""
"\n"
"下列 ARM 特定的反汇编器选项可通过 -M 开关启用：\n"

#: xstormy16-asm.c:71
msgid "Bad register in preincrement"
msgstr "前置自增中使用了错误的寄存器"

#: xstormy16-asm.c:76
msgid "Bad register in postincrement"
msgstr "后置自增中使用了错误的寄存器"

#: xstormy16-asm.c:78
msgid "Bad register name"
msgstr "错误的寄存器名"

#: xstormy16-asm.c:82
msgid "Label conflicts with register name"
msgstr "标号与寄存器名冲突"

#: xstormy16-asm.c:86
msgid "Label conflicts with `Rx'"
msgstr "标号与‘Rx’冲突"

#: xstormy16-asm.c:88
msgid "Bad immediate expression"
msgstr "错误的立即数表达式"

#: xstormy16-asm.c:109
#, fuzzy
msgid "No relocation for small immediate"
msgstr "立即数"

#: xstormy16-asm.c:119
#, fuzzy
msgid "Small operand was not an immediate number"
msgstr "符号被用作立即操作数"

#: xstormy16-asm.c:157
msgid "Operand is not a symbol"
msgstr "操作数不是一个符号"

#: xstormy16-asm.c:165
msgid "Syntax error: No trailing ')'"
msgstr "语法错误：没有结尾的‘)’"

#: xstormy16-desc.c:1318
#, c-format
msgid "internal error: xstormy16_cgen_rebuild_tables: conflicting insn-chunk-bitsize values: `%d' vs. `%d'"
msgstr ""

#: xstormy16-desc.c:1406
#, c-format
msgid "internal error: xstormy16_cgen_cpu_open: unsupported argument `%d'"
msgstr ""

#: xstormy16-desc.c:1425
#, c-format
msgid "internal error: xstormy16_cgen_cpu_open: no endianness specified"
msgstr ""

#~ msgid "z0-z15 expected"
#~ msgstr "预期为 z0-z15"

#~ msgid "z0-z7 expected"
#~ msgstr "预期为 z0-z7"

#, fuzzy
#~| msgid "Bad register name"
#~ msgid "invalid register list"
#~ msgstr "%q+D的寄存器名无效"

#~ msgid "p0-p7 expected"
#~ msgstr "预期为 p0-p7"

#, c-format
#~ msgid "  dsp             Recognize DSP instructions.\n"
#~ msgstr "  dsp             识别 DSP 指令。\n"

#, c-format
#~ msgid "Internal disassembler error"
#~ msgstr "反汇编器内部错误"

#, fuzzy, c-format
#~ msgid "can't cope with insert %d\n"
#~ msgstr "无法清除未激活的密钥 %d。\n"

#, c-format
#~ msgid "%02x\t\t*unknown*"
#~ msgstr "%02x\t\t*未知*"

#, c-format
#~ msgid "%s: Error: "
#~ msgstr "%s：错误："

#, fuzzy, c-format
#~ msgid "%s: %d: Unknown bitfield: %s\n"
#~ msgstr "行 %d：未知标签：%s\n"

#, fuzzy, c-format
#~| msgid "Unknown error %d\n"
#~ msgid "Unknown bitfield: %s\n"
#~ msgstr "%s：未知函数‘%u’\n"

#, fuzzy, c-format
#~ msgid "%s: %d: Missing `)' in bitfield: %s\n"
#~ msgstr "缺少 %s%d %s：%s\n"

#, fuzzy, c-format
#~ msgid "can't find i386-opc.tbl for reading, errno = %s\n"
#~ msgstr "找不到阅读，errno i386 opc.tbl = %s"

#, fuzzy, c-format
#~ msgid "can't find i386-reg.tbl for reading, errno = %s\n"
#~ msgstr "找不到阅读，errno i386 reg.tbl = %s"

#, fuzzy, c-format
#~ msgid "can't create i386-init.h, errno = %s\n"
#~ msgstr "无法创建 i386-init.h，errno = %s"

#, c-format
#~ msgid "unable to change directory to \"%s\", errno = %s\n"
#~ msgstr "无法将当前目录切换至“%s”，errno = %s\n"

#, fuzzy, c-format
#~ msgid "%d unused bits in i386_operand_type.\n"
#~ msgstr "%d 未使用的钻头在 i386_operand_type。"

#, c-format
#~ msgid "can't create i386-tbl.h, errno = %s\n"
#~ msgstr "无法创建 i386-tbl.h，errno = %s\n"

#, c-format
#~ msgid "%s: Warning: "
#~ msgstr "%s：警告："

#, fuzzy, c-format
#~ msgid "multiple note %s not handled\n"
#~ msgstr "%s：多次重复定义符号“%s”"

#, fuzzy
#~ msgid "can't find ia64-ic.tbl for reading\n"
#~ msgstr "找不到 ia64 ic.tbl 阅读"

#, fuzzy, c-format
#~ msgid "can't find %s for reading\n"
#~ msgstr "%s：无法找到模块文件 %s\n"

#, fuzzy, c-format
#~ msgid ""
#~ "most recent format '%s'\n"
#~ "appears more restrictive than '%s'\n"
#~ msgstr "最新格式 %s 似乎比 %s 的限制性更强"

#, fuzzy, c-format
#~ msgid "overlapping field %s->%s\n"
#~ msgstr "缺少字段‘%s’，在‘%s’中"

#, fuzzy, c-format
#~ msgid "overwriting note %d with note %d (IC:%s)\n"
#~ msgstr "用注 %d (IC:%s) 覆盖注 %d"

#, c-format
#~ msgid "don't know how to specify %% dependency %s\n"
#~ msgstr "不知道如何指定 %% 依赖 %s\n"

#, c-format
#~ msgid "Don't know how to specify # dependency %s\n"
#~ msgstr "不知道如何指定 # 依赖 %s\n"

#, fuzzy, c-format
#~ msgid "IC:%s [%s] has no terminals or sub-classes\n"
#~ msgstr "IC:%s [%s] 没有任何终端或子类"

#, fuzzy, c-format
#~ msgid "IC:%s has no terminals or sub-classes\n"
#~ msgstr "IC:%s 有没有终端或子类"

#, fuzzy, c-format
#~ msgid "no insns mapped directly to terminal IC %s [%s]"
#~ msgstr "没有 insn 被直接映射到终端 IC %s [%s]"

#, fuzzy, c-format
#~ msgid "no insns mapped directly to terminal IC %s\n"
#~ msgstr "没有 insn 被直接映射到终端 IC %s\n"

#, fuzzy, c-format
#~ msgid "class %s is defined but not used\n"
#~ msgstr "%q+D定义后未使用"

#, fuzzy, c-format
#~ msgid "Warning: rsrc %s (%s) has no chks\n"
#~ msgstr "警告：%s 节的大小为零"

#, fuzzy, c-format
#~ msgid "Warning: rsrc %s (%s) has no chks or regs\n"
#~ msgstr "指数部分没有数字"

#, fuzzy, c-format
#~ msgid "rsrc %s (%s) has no regs\n"
#~ msgstr "%s 已不可访问"

#, fuzzy, c-format
#~ msgid "opcode %s has no class (ops %d %d %d)\n"
#~ msgstr "尚未定义名为“%s”的 <draw_ops>"

#, c-format
#~ msgid "# <dis error: %08lx>"
#~ msgstr "# <反汇编出错: %08lx>"

#, fuzzy, c-format
#~| msgid ""
#~| "\n"
#~| "  msa             Recognize MSA instructions.\n"
#~ msgid ""
#~ "\n"
#~ "  msa                      Recognize MSA instructions.\n"
#~ msgstr ""
#~ "\n"
#~ "  msa             识别 MSA 指令。\n"

#, fuzzy, c-format
#~| msgid ""
#~| "\n"
#~| "  hwr-names=ARCH           Print HWR names according to specified \n"
#~| "\t\t\t   architecture.\n"
#~| "                           Default: based on binary being disassembled.\n"
#~ msgid ""
#~ "\n"
#~ "  hwr-names=ARCH           Print HWR names according to specified \n"
#~ "                           architecture.\n"
#~ "                           Default: based on binary being disassembled.\n"
#~ msgstr ""
#~ "\n"
#~ "  hwr-names=ARCH           根据指定的架构打印 HWR 寄存器名。\n"
#~ "                           默认：根据被反汇编的二进制代码。\n"

#, c-format
#~ msgid ""
#~ "\n"
#~ "  For the options above, The following values are supported for \"ARCH\":\n"
#~ "   "
#~ msgstr ""
#~ "\n"
#~ "  对于以上的选项，以下值可被用于 \"ARCH\"：\n"
#~ "   "

#, c-format
#~ msgid "Internal error:  bad sparc-opcode.h: \"%s\", %#.8lx, %#.8lx\n"
#~ msgstr "内部错误：错误的 sparc-opcode.h：“%s”，%#.8lx，%#.8lx\n"

#~ msgid "Missing '#' prefix"
#~ msgstr "缺失 '#' 前缀"

#~ msgid "Missing '.' prefix"
#~ msgstr "缺失 '.' 前缀"

#~ msgid "Missing 'pof:' prefix"
#~ msgstr "缺失 'pof:' 前缀"

#~ msgid "Missing 'pag:' prefix"
#~ msgstr "缺失 'pag:' 前缀"

#~ msgid "Missing 'sof:' prefix"
#~ msgstr "缺失 'sof:' 前缀"

#~ msgid "Missing 'seg:' prefix"
#~ msgstr "缺失 'seg:' 前缀"

#, fuzzy
#~ msgid "Illegal limm reference in last instruction!\n"
#~ msgstr "在最后一条指令的非法住参考!"

#, fuzzy
#~ msgid "unable to fit different valued constants into instruction"
#~ msgstr "无法融入教学的不同值的常数"

#, fuzzy
#~ msgid "auxiliary register not allowed here"
#~ msgstr "在这里不允许使用%<#pragma%>"

#, fuzzy
#~ msgid "too many long constants"
#~ msgstr "实参太多"

#, fuzzy
#~ msgid "too many shimms in load"
#~ msgstr "重复行过多"

#, fuzzy
#~ msgid "impossible store"
#~ msgstr "STORE"

#, fuzzy
#~ msgid "st operand error"
#~ msgstr ""
#~ "\n"
#~ "错误: ILL_ILLOPN (不合法的算符)"

#, fuzzy
#~ msgid "address writeback not allowed"
#~ msgstr "意外的地址写回"

#, fuzzy
#~ msgid "invalid load/shimm insn"
#~ msgstr "无效指令："

#, fuzzy
#~ msgid "ld operand error"
#~ msgstr ""
#~ "\n"
#~ "错误: ILL_ILLOPN (不合法的算符)"

#, fuzzy
#~ msgid "jump flags, but no .f seen"
#~ msgstr "   -f --as-flags <flags>     把 <flags> 传递给汇编程序。\n"

#, fuzzy
#~ msgid "jump flags, but no limm addr"
#~ msgstr "跳的旗帜，但没有住地址"

#, fuzzy
#~ msgid "flag bits of jump address limm lost"
#~ msgstr "标志位的跳转地址住失去了"

#, fuzzy
#~ msgid "attempt to set HR bits"
#~ msgstr "<无法识别的标志位集合>"

#, fuzzy
#~ msgid "bad jump flags value"
#~ msgstr "错误的ai_flags 值"

#, fuzzy
#~ msgid "branch address not on 4 byte boundary"
#~ msgstr "将函数强行对齐到 4 字节边界上"

#, fuzzy
#~ msgid "must specify .jd or no nullify suffix"
#~ msgstr "必须指定.jd 或无 nullify 后缀"

#~ msgid "unknown\t0x%04x"
#~ msgstr "未知\t0x%04x"

#~ msgid "offset greater than 62"
#~ msgstr "偏移量大于 62"

#~ msgid "offset greater than 124"
#~ msgstr "偏移量大于 124"

#~ msgid "offset not a multiple of 8"
#~ msgstr "偏移量不是 8 的倍数"

#~ msgid "offset greater than 248"
#~ msgstr "偏移量大于 248"

#~ msgid "offset not between -2048 and 2047"
#~ msgstr "偏移量不在 -2048 和 2047 之间"

#~ msgid "offset not between -8192 and 8191"
#~ msgstr "偏移量不在 -8192 和 8191 之间"

#~ msgid "source register operand must be even"
#~ msgstr "源寄存器操作数必须是偶数"

#~ msgid "branch value not in range and to an odd offset"
#~ msgstr "跳转越界且跳转偏移量为奇数"

#~ msgid "immediate value not in range and not even"
#~ msgstr "立即数越界且不是偶数"