# Simplified Chinese Messages for the nano editor
# Copyright (C) 2004, 2005, 2009, 2010, 2011 Free Software Foundation, Inc.
# This file is distributed under the same license as the nano package.
#
# LI Daobing <lidaobing@gmail.com>, 2007, 2008, 2009.
# Aron Xu <happyaron.xu@gmail.com>, 2009, 2010, 2011, 2015.
msgid ""
msgstr ""
"Project-Id-Version: nano 2.4.2\n"
"Report-Msgid-Bugs-To: \n"
"POT-Creation-Date: 2016-07-28 09:25+0200\n"
"PO-Revision-Date: 2015-11-13 12:46+0800\n"
"Last-Translator: Aron Xu <happyaron.xu@gmail.com>\n"
"Language-Team: Chinese (simplified) <i18n-zh@googlegroups.com>\n"
"Language: zh_CN\n"
"X-Bugs: Report translation errors to the Language-Team address.\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Plural-Forms: nplurals=1; plural=0;\n"

#. TRANSLATORS: This is a prompt.
#: src/browser.c:233
msgid "Go To Directory"
msgstr "跳至目录"

#: src/browser.c:238 src/browser.c:701 src/files.c:1125 src/files.c:2286
#: src/nano.c:1101 src/search.c:194 src/search.c:296 src/search.c:848
#: src/search.c:915 src/text.c:3180 src/text.c:3387
msgid "Cancelled"
msgstr "已取消"

#. TRANSLATORS: This refers to the confining effect of the
#. * option --operatingdir, not of --restricted.
#: src/browser.c:259 src/browser.c:291
#, fuzzy, c-format
#| msgid "Can't write outside of %s"
msgid "Can't go outside of %s"
msgstr "无法写入%s 外部"

#: src/browser.c:282
msgid "Can't move up a directory"
msgstr "无法上移一个目录"

#: src/browser.c:298 src/files.c:995 src/files.c:1002 src/files.c:1790
#: src/files.c:1915 src/files.c:1959 src/files.c:1979 src/files.c:2095
#: src/files.c:3011 src/files.c:3234 src/rcfile.c:541 src/rcfile.c:1281
#, c-format
msgid "Error reading %s: %s"
msgstr "读取%s 出错：%s"

#. TRANSLATORS: Try to keep this at most 7 characters.
#: src/browser.c:568 src/browser.c:576
msgid "(dir)"
msgstr "(目录)"

#. TRANSLATORS: Try to keep this at most 12 characters.
#: src/browser.c:573
msgid "(parent dir)"
msgstr "(父目录)"

#. TRANSLATORS: Try to keep this at most 7 characters.
#. * If necessary, you can leave out the parentheses.
#: src/browser.c:603
msgid "(huge)"
msgstr ""

#. TRANSLATORS: This is the main search prompt.
#: src/browser.c:690 src/search.c:165
msgid "Search"
msgstr "搜索"

#: src/browser.c:732 src/search.c:369
msgid "Search Wrapped"
msgstr "已从头搜索"

#: src/browser.c:742 src/search.c:510
msgid "This is the only occurrence"
msgstr "这是惟一出现之处"

#: src/browser.c:786 src/search.c:474
msgid "No current search pattern"
msgstr "没有当前搜索模式"

#: src/color.c:185
#, fuzzy, c-format
#| msgid "Missing syntax name"
msgid "Unknown syntax name: %s"
msgstr "缺少语法名称"

#: src/color.c:246
#, c-format
msgid "magic_load() failed: %s"
msgstr ""

#: src/color.c:250
#, c-format
msgid "magic_file(%s) failed: %s"
msgstr ""

#: src/files.c:47
#, fuzzy, c-format
#| msgid "Error writing backup file %s: File owner mismatch"
msgid "Directory '%s' does not exist"
msgstr "写入备份文件%s 出错：文件所有者不匹配"

#: src/files.c:49
#, c-format
msgid "Path '%s': %s"
msgstr ""

#: src/files.c:51
#, fuzzy, c-format
#| msgid "\"%s\" is a directory"
msgid "Path '%s' is not a directory"
msgstr "\"%s\" 是一个目录"

#: src/files.c:53
#, c-format
msgid "Path '%s' is not accessible"
msgstr ""

#. TRANSLATORS: Keep the next ten messages at most 76 characters.
#: src/files.c:148
msgid "Warning: Modifying a file which is not locked, check directory permission?"
msgstr ""

#: src/files.c:187
msgid "Couldn't determine my identity for lock file (getpwuid() failed)"
msgstr ""

#: src/files.c:196
#, c-format
msgid "Couldn't determine hostname for lock file: %s"
msgstr ""

#: src/files.c:216 src/files.c:225 src/files.c:262 src/files.c:272
#, fuzzy, c-format
#| msgid "Error writing backup file %s: %s"
msgid "Error writing lock file %s: %s"
msgstr "写入备份文件%s 出错：%s"

#: src/files.c:291
#, fuzzy, c-format
#| msgid "Error writing backup file %s: %s"
msgid "Error deleting lock file %s: %s"
msgstr "写入备份文件%s 出错：%s"

#: src/files.c:325
#, fuzzy, c-format
#| msgid "Error writing backup file %s: %s"
msgid "Error opening lock file %s: %s"
msgstr "写入备份文件%s 出错：%s"

#: src/files.c:337
#, c-format
msgid "Error reading lock file %s: Not enough data read"
msgstr ""

#. TRANSLATORS: The second %s is the name of the user, the third that of the editor.
#: src/files.c:354
#, c-format
msgid "File %s is being edited (by %s with %s, PID %d); continue?"
msgstr ""

#: src/files.c:430
#, c-format
msgid "Can't insert file from outside of %s"
msgstr "无法插入%s 外部的文件"

#: src/files.c:445 src/files.c:990 src/rcfile.c:534 src/rcfile.c:1231
#: src/rcfile.c:1272
#, c-format
msgid "\"%s\" is a directory"
msgstr "\"%s\" 是一个目录"

#: src/files.c:447
#, fuzzy, c-format
#| msgid "\"%s\" is a device file"
msgid "\"%s\" is not a normal file"
msgstr "\"%s\" 是一个设备文件"

#: src/files.c:571
msgid "No more open file buffers"
msgstr "无多余文件缓冲区可启用"

#: src/files.c:586
#, c-format
msgid "Switched to %s"
msgstr "切换至%s"

#: src/files.c:588 src/global.c:1021 src/winio.c:1915
msgid "New Buffer"
msgstr "新缓冲区"

#. TRANSLATORS: Keep the next four messages at most 76 characters.
#: src/files.c:912
#, c-format
msgid "Read %lu line (Converted from DOS and Mac format)"
msgid_plural "Read %lu lines (Converted from DOS and Mac format)"
msgstr[0] "已读取%lu 行(转换自DOS 与Mac 格式)"

#: src/files.c:918
#, c-format
msgid "Read %lu line (Converted from Mac format)"
msgid_plural "Read %lu lines (Converted from Mac format)"
msgstr[0] "已读取%lu 行 (转换自Mac 格式)"

#: src/files.c:924
#, c-format
msgid "Read %lu line (Converted from DOS format)"
msgid_plural "Read %lu lines (Converted from DOS format)"
msgstr[0] "已读取%lu 行 (转换自DOS 格式)"

#: src/files.c:929
#, c-format
msgid "Read %lu line"
msgid_plural "Read %lu lines"
msgstr[0] "已读取%lu 行"

#: src/files.c:973 src/files.c:1005
msgid "Reading File"
msgstr "正在读取文件"

#: src/files.c:979
msgid "New File"
msgstr "新文件"

#: src/files.c:982
#, fuzzy, c-format
#| msgid "\"%s\" not found"
msgid "File \"%s\" not found"
msgstr "找不到\"%s\""

#: src/files.c:991 src/rcfile.c:535 src/rcfile.c:1232 src/rcfile.c:1273
#, c-format
msgid "\"%s\" is a device file"
msgstr "\"%s\" 是一个设备文件"

#: src/files.c:1082
#, c-format
msgid "Command to execute in new buffer [from %s] "
msgstr "在新缓冲区中执行的命令 [从%s] "

#: src/files.c:1084
#, c-format
msgid "Command to execute [from %s] "
msgstr "执行的命令 [从%s] "

#: src/files.c:1091
#, c-format
msgid "File to insert into new buffer [from %s] "
msgstr "要插入新缓冲区的文件 [从%s] "

#: src/files.c:1093
#, c-format
msgid "File to insert [from %s] "
msgstr "要插入的文件 [从%s] "

#: src/files.c:1336
msgid "Key invalid in non-multibuffer mode"
msgstr "非多重缓冲区模式中此按键无效"

#: src/files.c:1628
#, fuzzy
#| msgid "Failed to write backup file, continue saving? (Say N if unsure) "
msgid "Failed to write backup file; continue saving? (Say N if unsure.) "
msgstr "写入备份文件失败，继续保存吗？(如果不确定请输入N)"

#: src/files.c:1746
#, c-format
msgid "Can't write outside of %s"
msgstr "无法写入%s 外部"

#: src/files.c:1829 src/files.c:1854 src/files.c:1872 src/files.c:1885
#: src/files.c:1896 src/files.c:1924
#, c-format
msgid "Error writing backup file %s: %s"
msgstr "写入备份文件%s 出错：%s"

#: src/files.c:1830 src/nano.c:676
msgid "Too many backup files?"
msgstr "太多备份文件？"

#: src/files.c:1968 src/files.c:1990 src/text.c:3110 src/text.c:3122
#: src/text.c:3487 src/text.c:3496
#, c-format
msgid "Error writing temp file: %s"
msgstr "写入临时文件%s 出错"

#: src/files.c:2009 src/files.c:2019 src/files.c:2043 src/files.c:2060
#: src/files.c:2070 src/files.c:2102 src/files.c:2109
#, c-format
msgid "Error writing %s: %s"
msgstr "写入%s 出错：%s"

#: src/files.c:2148
#, c-format
msgid "Wrote %lu line"
msgid_plural "Wrote %lu lines"
msgstr[0] "已写入%lu 行"

#: src/files.c:2243
msgid " [DOS Format]"
msgstr " [DOS 格式]"

#: src/files.c:2244
msgid " [Mac Format]"
msgstr " [Mac 格式]"

#: src/files.c:2246
msgid " [Backup]"
msgstr " [备份]"

#: src/files.c:2253
msgid "Prepend Selection to File"
msgstr "前引选择部份于文件"

#: src/files.c:2254
msgid "Append Selection to File"
msgstr "附加选择部份至文件"

#: src/files.c:2255
msgid "Write Selection to File"
msgstr "写入选择部份至文件"

#: src/files.c:2258
msgid "File Name to Prepend to"
msgstr "要前引于的文件名"

#: src/files.c:2259
msgid "File Name to Append to"
msgstr "要附加至的文件名"

#: src/files.c:2260
msgid "File Name to Write"
msgstr "要写入的文件名"

#: src/files.c:2295
msgid "Save modified buffer anyway? "
msgstr ""

#: src/files.c:2406
#, fuzzy
#| msgid "Save file under DIFFERENT NAME ? "
msgid "Save file under DIFFERENT NAME? "
msgstr "以不同的名称存档？"

#: src/files.c:2414
#, fuzzy, c-format
#| msgid "File exists, OVERWRITE ? "
msgid "File \"%s\" exists; OVERWRITE? "
msgstr "文件已存在，要覆盖吗？"

#: src/files.c:2435
#, fuzzy
#| msgid "File was modified since you opened it, continue saving ? "
msgid "File was modified since you opened it; continue saving? "
msgstr "在您打开文件后文件已被改变，是否继续保存？"

#: src/files.c:2866
msgid "(more)"
msgstr "(更多)"

#: src/files.c:2951
#, c-format
msgid ""
"\n"
"Press Enter to continue\n"
msgstr ""
"\n"
"按下回车键继续\n"

#: src/files.c:2967
#, fuzzy, c-format
#| msgid ""
#| "Unable to create directory %s: %s\n"
#| "It is required for saving/loading search history or cursor position\n"
msgid ""
"Unable to create directory %s: %s\n"
"It is required for saving/loading search history or cursor positions.\n"
msgstr ""
"无法创建目录 %s：%s\n"
"然而保存和载入搜索历史或光标位置需要它。\n"

#: src/files.c:2974
#, fuzzy, c-format
#| msgid ""
#| "Path %s is not a directory and needs to be.\n"
#| "Nano will be unable to load or save search or cursor position history\n"
msgid ""
"Path %s is not a directory and needs to be.\n"
"Nano will be unable to load or save search history or cursor positions.\n"
msgstr ""
"路径%s 应为一个目录，但现在不是。\n"
"Nano 将无法载入或保存搜索历史或光标位置\n"

#: src/files.c:2994
#, c-format
msgid ""
"Detected a legacy nano history file (%s) which I tried to move\n"
"to the preferred location (%s) but encountered an error: %s"
msgstr ""
"检测到了旧版的Nano 历史文件(%s)并试图移动到默认位置(%s)。\n"
"此操作出现错误：%s"

#: src/files.c:2998
#, c-format
msgid ""
"Detected a legacy nano history file (%s) which I moved\n"
"to the preferred location (%s)\n"
"(see the nano FAQ about this change)"
msgstr ""
"检测到了旧版的Nano 历史文件(%s)并已移动到默认位置(%s)。\n"
"(关于这个变更请参阅Nano 常见问题解答)"

#: src/files.c:3081 src/files.c:3089 src/files.c:3113 src/files.c:3125
#, fuzzy, c-format
#| msgid "Error writing %s: %s"
msgid "Error writing %s: %s\n"
msgstr "写入%s 出错：%s"

#. TRANSLATORS: Try to keep the next fifteen strings at most 10 characters.
#: src/global.c:488
msgid "Exit"
msgstr "离开"

#: src/global.c:489
msgid "Close"
msgstr "关闭"

#: src/global.c:490
#, fuzzy
#| msgid "UnCut Text"
msgid "Uncut Text"
msgstr "还原剪切"

#: src/global.c:492
#, fuzzy
#| msgid "UnJustify"
msgid "Unjustify"
msgstr "还原对齐"

#: src/global.c:498
msgid "Read File"
msgstr "读档"

#: src/global.c:499
msgid "Where Is"
msgstr "搜索"

#: src/global.c:500
msgid "Replace"
msgstr "替换"

#: src/global.c:501
msgid "Go To Line"
msgstr "跳行"

#: src/global.c:502
msgid "Prev Line"
msgstr "上行"

#: src/global.c:503
msgid "Next Line"
msgstr "下行"

#: src/global.c:504
msgid "Prev Page"
msgstr "上页"

#: src/global.c:505
msgid "Next Page"
msgstr "下页"

#: src/global.c:507
msgid "Justify"
msgstr "对齐"

#: src/global.c:508
msgid "FullJstify"
msgstr "全部对齐"

#: src/global.c:510
msgid "Refresh"
msgstr "刷新"

#. TRANSLATORS: Try to keep this string at most 12 characters.
#: src/global.c:513
msgid "WhereIs Next"
msgstr "何处是下一个"

#. TRANSLATORS: The next long series of strings are shortcut descriptions;
#. * they are best kept shorter than 56 characters, but may be longer.
#: src/global.c:520
msgid "Justify the current paragraph"
msgstr "对齐当前段落"

#: src/global.c:522
msgid "Cancel the current function"
msgstr "取消当前功能"

#: src/global.c:523
msgid "Display this help text"
msgstr "显示帮助"

#: src/global.c:526
msgid "Close the current file buffer / Exit from nano"
msgstr "关闭当前文件缓冲区 / 离开 nano"

#: src/global.c:528
msgid "Exit from nano"
msgstr "离开 nano"

#: src/global.c:532
msgid "Write the current file to disk"
msgstr "写入当前文件至磁盘"

#: src/global.c:534
msgid "Insert another file into the current one"
msgstr "插入其他文件至当前文件"

#: src/global.c:536
msgid "Search for a string or a regular expression"
msgstr "查找字符串或正则表示式"

#: src/global.c:538
#, fuzzy
#| msgid "Search for a string or a regular expression"
msgid "Search for a string"
msgstr "查找字符串或正则表示式"

#: src/global.c:539
msgid "Refresh the file list"
msgstr ""

#: src/global.c:540
#, fuzzy
#| msgid "Go to line and column number"
msgid "Go to lefthand column"
msgstr "跳至指定行与列位置"

#: src/global.c:541
#, fuzzy
#| msgid "Go to line and column number"
msgid "Go to righthand column"
msgstr "跳至指定行与列位置"

#: src/global.c:543
#, fuzzy
#| msgid "Go to next screen"
msgid "Go one screenful up"
msgstr "跳至后一屏"

#: src/global.c:544
#, fuzzy
#| msgid "Go to next screen"
msgid "Go one screenful down"
msgstr "跳至后一屏"

#: src/global.c:546
msgid "Cut the current line and store it in the cutbuffer"
msgstr "剪切当前这行并存至剪贴板"

#: src/global.c:548
msgid "Uncut from the cutbuffer into the current line"
msgstr "从剪贴板粘贴至当前行"

#: src/global.c:549
msgid "Display the position of the cursor"
msgstr "显示光标位置"

#: src/global.c:551
msgid "Invoke the spell checker, if available"
msgstr "尝试运行拼写检查"

#: src/global.c:553
msgid "Replace a string or a regular expression"
msgstr "替换字符串或正则表示式"

#: src/global.c:554
msgid "Go to line and column number"
msgstr "跳至指定行与列位置"

#: src/global.c:556
#, fuzzy
#| msgid "Mark text at the cursor position"
msgid "Mark text starting from the cursor position"
msgstr "标记游标所在文字"

#: src/global.c:557
#, fuzzy
#| msgid "Repeat last search"
msgid "Repeat the last search"
msgstr "重复上次搜索"

#: src/global.c:559
msgid "Copy the current line and store it in the cutbuffer"
msgstr "拷贝当前行至剪贴板"

#: src/global.c:560
msgid "Indent the current line"
msgstr "缩进当前行"

#: src/global.c:561
msgid "Unindent the current line"
msgstr "取消缩进当前行"

#: src/global.c:563
msgid "Comment/uncomment the current line or marked lines"
msgstr ""

#: src/global.c:565
msgid "Undo the last operation"
msgstr "撤销上次操作"

#: src/global.c:566
msgid "Redo the last undone operation"
msgstr "重做撤销的操作"

#: src/global.c:568
msgid "Go back one character"
msgstr "向后跳一字符"

#: src/global.c:569
msgid "Go forward one character"
msgstr "向前跳一字符"

#: src/global.c:571
msgid "Go back one word"
msgstr "向后跳一个词"

#: src/global.c:572
msgid "Go forward one word"
msgstr "向前跳一个词"

#: src/global.c:574
msgid "Go to previous line"
msgstr "跳至前一行"

#: src/global.c:575
msgid "Go to next line"
msgstr "跳至后一行"

#: src/global.c:576
msgid "Go to beginning of current line"
msgstr "跳至当前行首"

#: src/global.c:577
msgid "Go to end of current line"
msgstr "跳至当前行尾"

#: src/global.c:579
#, fuzzy
#| msgid "Go to previous line"
msgid "Go to previous block of text"
msgstr "跳至前一行"

#: src/global.c:580
#, fuzzy
#| msgid "Go to next line"
msgid "Go to next block of text"
msgstr "跳至后一行"

#: src/global.c:584
msgid "Go to beginning of paragraph; then of previous paragraph"
msgstr "跳至当前段落开头，如已在段落开头，则调至上一段落起始处"

#: src/global.c:586
msgid "Go just beyond end of paragraph; then of next paragraph"
msgstr "跳至当前段落结尾，如已在段落结尾，则调至下一段落结尾"

#: src/global.c:588
msgid "Go to the first line of the file"
msgstr "跳至文件第一行"

#: src/global.c:589
msgid "Go to the last line of the file"
msgstr "跳至文件最后一行"

#: src/global.c:591
msgid "Go to the matching bracket"
msgstr "移动至对应括号"

#: src/global.c:593
msgid "Scroll up one line without scrolling the cursor"
msgstr "向上卷动一行但不卷动游标"

#: src/global.c:595
msgid "Scroll down one line without scrolling the cursor"
msgstr "向下卷动一行但不卷动游标"

#: src/global.c:598
msgid "Switch to the previous file buffer"
msgstr "切换至上个文件缓冲区"

#: src/global.c:599
msgid "Switch to the next file buffer"
msgstr "切换至下个文件缓冲区"

#: src/global.c:601
msgid "Insert the next keystroke verbatim"
msgstr "插入下一按键原型"

#: src/global.c:602
msgid "Insert a tab at the cursor position"
msgstr "插入制表符于游标位置"

#: src/global.c:603
msgid "Insert a newline at the cursor position"
msgstr "插入新行于游标位置"

#: src/global.c:604
msgid "Delete the character under the cursor"
msgstr "删除游标之下的字符"

#: src/global.c:606
msgid "Delete the character to the left of the cursor"
msgstr "删除游标左侧的字符"

#: src/global.c:609
#, fuzzy
#| msgid "Cut from cursor to end of line"
msgid "Cut backward from cursor to word start"
msgstr "从游标剪切至行尾"

#: src/global.c:611
#, fuzzy
#| msgid "Cut from cursor to end of line"
msgid "Cut forward from cursor to next word start"
msgstr "从游标剪切至行尾"

#: src/global.c:613
msgid "Cut from the cursor position to the end of the file"
msgstr "从游标位置剪切至文件结尾"

#: src/global.c:616
msgid "Justify the entire file"
msgstr "对齐整个文件"

#: src/global.c:620
msgid "Count the number of words, lines, and characters"
msgstr "计算字数、行数与字符数"

#: src/global.c:623
msgid "Refresh (redraw) the current screen"
msgstr "重新显示当前画面"

#: src/global.c:625
#, fuzzy
#| msgid "Suspend the editor (if suspend is enabled)"
msgid "Suspend the editor (if suspension is enabled)"
msgstr "暂停编辑器(如果启用了暂停)"

#: src/global.c:627
msgid "Save file without prompting"
msgstr ""

#: src/global.c:628
msgid "Search next occurrence backward"
msgstr ""

#: src/global.c:629
msgid "Search next occurrence forward"
msgstr ""

#: src/global.c:631
msgid "Toggle the case sensitivity of the search"
msgstr "切换查找的区分大小写选项"

#: src/global.c:633
msgid "Reverse the direction of the search"
msgstr "反转搜索方向"

#: src/global.c:637
msgid "Toggle the use of regular expressions"
msgstr "切换使用正则表示式"

#: src/global.c:641
msgid "Recall the previous search/replace string"
msgstr "编辑前次搜索/替换字符串"

#: src/global.c:643
msgid "Recall the next search/replace string"
msgstr "编辑下次搜索/替换字符串"

#: src/global.c:646
msgid "Go to file browser"
msgstr "打开文件选单"

#: src/global.c:649
msgid "Toggle the use of DOS format"
msgstr "切换使用DOS 格式"

#: src/global.c:650
msgid "Toggle the use of Mac format"
msgstr "切换使用Mac 格式"

#: src/global.c:651
msgid "Toggle appending"
msgstr "切换追加"

#: src/global.c:652
msgid "Toggle prepending"
msgstr "切换前置插入"

#: src/global.c:653
msgid "Toggle backing up of the original file"
msgstr "切换储存既有文件的备份"

#: src/global.c:654
msgid "Execute external command"
msgstr "执行外部命令"

#: src/global.c:656
msgid "Close buffer without saving it"
msgstr ""

#: src/global.c:658
msgid "Toggle the use of a new buffer"
msgstr "切换使用新缓冲区"

#: src/global.c:661
msgid "Exit from the file browser"
msgstr "从文件选单离开"

#: src/global.c:662
msgid "Go to the first file in the list"
msgstr "跳至文件第一列"

#: src/global.c:663
msgid "Go to the last file in the list"
msgstr "跳至文件最后一列"

#: src/global.c:664
msgid "Go to the previous file in the list"
msgstr "跳至列表中的前一个文件"

#: src/global.c:665
msgid "Go to the next file in the list"
msgstr "跳至列表中的下一个文件"

#: src/global.c:666
msgid "Go to directory"
msgstr "跳至目录"

#: src/global.c:669
#, fuzzy
#| msgid "Invoke the spell checker, if available"
msgid "Invoke the linter, if available"
msgstr "尝试运行拼写检查"

#: src/global.c:670
#, fuzzy
#| msgid "Go to previous line"
msgid "Go to previous linter msg"
msgstr "跳至前一行"

#: src/global.c:671
#, fuzzy
#| msgid "Go to next line"
msgid "Go to next linter msg"
msgstr "跳至后一行"

#: src/global.c:673
#, fuzzy
#| msgid "Invoke the spell checker, if available"
msgid "Invoke formatter, if available"
msgstr "尝试运行拼写检查"

#. TRANSLATORS: Try to keep the following strings at most 10 characters.
#: src/global.c:688
msgid "Get Help"
msgstr "求助"

#: src/global.c:691 src/prompt.c:839
msgid "Cancel"
msgstr "取消"

#: src/global.c:704
#, fuzzy
#| msgid "WriteOut"
msgid "Write Out"
msgstr "写入"

#: src/global.c:740
msgid "Go To Dir"
msgstr "跳至目录"

#: src/global.c:755
msgid "Cut Text"
msgstr "剪切文字"

#: src/global.c:770
msgid "To Spell"
msgstr "拼写检查"

#: src/global.c:774
#, fuzzy
#| msgid "Go To Line"
msgid "To Linter"
msgstr "跳行"

#: src/global.c:777
#, fuzzy
#| msgid "DOS Format"
msgid "Formatter"
msgstr "DOS 格式"

#: src/global.c:784
msgid "Case Sens"
msgstr "区分大小写"

#: src/global.c:789
msgid "Regexp"
msgstr "正则表达式"

#: src/global.c:794
msgid "Backwards"
msgstr "向后搜索"

#: src/global.c:801
msgid "No Replace"
msgstr "不替换"

#: src/global.c:809
msgid "Cur Pos"
msgstr "游标位置"

#: src/global.c:824
msgid "First Line"
msgstr "首行"

#: src/global.c:826
msgid "Last Line"
msgstr "尾行"

#: src/global.c:833
#, fuzzy
#| msgid "Not a bracket"
msgid "To Bracket"
msgstr "并非一个括号"

#: src/global.c:836
msgid "Mark Text"
msgstr "标记文字"

#: src/global.c:839
msgid "Copy Text"
msgstr "复制文字"

#: src/global.c:842
msgid "Indent Text"
msgstr "缩进文字"

#: src/global.c:844
msgid "Unindent Text"
msgstr "取消缩进"

#: src/global.c:847
msgid "Undo"
msgstr "撤销"

#: src/global.c:849
msgid "Redo"
msgstr "重做"

#: src/global.c:853 src/global.c:859
msgid "Back"
msgstr "向后"

#: src/global.c:855 src/global.c:861
msgid "Forward"
msgstr "向前"

#: src/global.c:866
msgid "Prev Word"
msgstr "前一个字"

#: src/global.c:868
msgid "Next Word"
msgstr "后一个字"

#: src/global.c:872
msgid "Home"
msgstr "顶端"

#: src/global.c:874
msgid "End"
msgstr "尾端"

#: src/global.c:883
#, fuzzy
#| msgid "Prev Word"
msgid "Prev Block"
msgstr "前一个字"

#: src/global.c:885
#, fuzzy
#| msgid "Next Word"
msgid "Next Block"
msgstr "后一个字"

#: src/global.c:890
msgid "Beg of Par"
msgstr "段落开头"

#: src/global.c:892
msgid "End of Par"
msgstr "段落结尾"

#: src/global.c:897
msgid "Scroll Up"
msgstr "向上卷动"

#: src/global.c:899
msgid "Scroll Down"
msgstr "向下卷动"

#: src/global.c:904
#, fuzzy
#| msgid "Previous File"
msgid "Prev File"
msgstr "上个文件"

#: src/global.c:906
msgid "Next File"
msgstr "下个文件"

#: src/global.c:915
#, fuzzy
#| msgid "Verbatim Input"
msgid "Verbatim"
msgstr "原形输入"

#: src/global.c:918
msgid "Tab"
msgstr "制表符"

#: src/global.c:920
msgid "Enter"
msgstr "回车"

#: src/global.c:923
msgid "Delete"
msgstr "删除"

#: src/global.c:925
msgid "Backspace"
msgstr "退格"

#. TRANSLATORS: The next two strings refer to cutting words.
#: src/global.c:936
#, fuzzy
#| msgid "Cut Text"
msgid "Cut Left"
msgstr "剪切文字"

#: src/global.c:938
msgid "Cut Right"
msgstr ""

#: src/global.c:940
msgid "CutTillEnd"
msgstr "删至末端"

#: src/global.c:950
msgid "Word Count"
msgstr "字数统计"

#: src/global.c:957
msgid "Suspend"
msgstr "暂停"

#: src/global.c:961
#, fuzzy
#| msgid "Next Line"
msgid "Comment Lines"
msgstr "下行"

#: src/global.c:965
msgid "Save"
msgstr ""

#: src/global.c:968
msgid "Previous"
msgstr ""

#: src/global.c:970
#, fuzzy
#| msgid "Next Line"
msgid "Next"
msgstr "下行"

#: src/global.c:976
msgid "PrevHstory"
msgstr "前一记录"

#: src/global.c:979
msgid "NextHstory"
msgstr "后一记录"

#: src/global.c:988
msgid "Go To Text"
msgstr "跳至文字"

#: src/global.c:992
msgid "DOS Format"
msgstr "DOS 格式"

#: src/global.c:994
msgid "Mac Format"
msgstr "Mac 格式"

#: src/global.c:1002
msgid "Append"
msgstr "附加"

#: src/global.c:1004
msgid "Prepend"
msgstr "前引"

#: src/global.c:1007
msgid "Backup File"
msgstr "备份文件"

#: src/global.c:1014
msgid "Execute Command"
msgstr "执行命令"

#: src/global.c:1029
msgid "To Files"
msgstr "文件选单"

#: src/global.c:1037
msgid "First File"
msgstr "首文件"

#: src/global.c:1039
msgid "Last File"
msgstr "末文件"

#: src/global.c:1043
msgid "Discard buffer"
msgstr ""

#: src/global.c:1054
msgid "Left Column"
msgstr ""

#: src/global.c:1056
msgid "Right Column"
msgstr ""

#. TRANSLATORS: Try to keep the next two strings at most 20 characters.
#: src/global.c:1063
#, fuzzy
#| msgid "Prev Line"
msgid "Prev Lint Msg"
msgstr "上行"

#: src/global.c:1065
#, fuzzy
#| msgid "Next Line"
msgid "Next Lint Msg"
msgstr "下行"

#. TRANSLATORS: The next seventeen strings are toggle descriptions;
#. * they are best kept shorter than 40 characters, but may be longer.
#: src/global.c:1336
msgid "Help mode"
msgstr "辅助模式"

#: src/global.c:1338
msgid "Constant cursor position display"
msgstr "持续显示游标位置"

#: src/global.c:1340
msgid "Use of one more line for editing"
msgstr "编辑时使用多一行"

#: src/global.c:1342
msgid "Smooth scrolling"
msgstr "平滑式卷动画面"

#: src/global.c:1344
#, fuzzy
#| msgid "Don't wrap long lines"
msgid "Soft wrapping of overlong lines"
msgstr "不要自动换行"

#: src/global.c:1346
msgid "Whitespace display"
msgstr "显示空格"

#: src/global.c:1348
msgid "Color syntax highlighting"
msgstr "语法色彩高亮"

#: src/global.c:1350
msgid "Smart home key"
msgstr "智能HOME 键"

#: src/global.c:1352
msgid "Auto indent"
msgstr "自动缩进"

#: src/global.c:1354
msgid "Cut to end"
msgstr "剪切至行尾"

#: src/global.c:1356
#, fuzzy
#| msgid "Don't wrap long lines"
msgid "Hard wrapping of overlong lines"
msgstr "不要自动换行"

#: src/global.c:1358
msgid "Conversion of typed tabs to spaces"
msgstr "已输入制表符至空白的转换"

#: src/global.c:1360
msgid "Backup files"
msgstr "备份文件"

#: src/global.c:1362
msgid "Reading file into separate buffer"
msgstr ""

#: src/global.c:1364
msgid "Mouse support"
msgstr "鼠标支持"

#: src/global.c:1366
msgid "No conversion from DOS/Mac format"
msgstr "不从 DOS/Mac 格式转换"

#: src/global.c:1368
msgid "Suspension"
msgstr "暂停"

#: src/help.c:211
msgid ""
"Search Command Help Text\n"
"\n"
" Enter the words or characters you would like to search for, and then press Enter.  If there is a match for the text you entered, the screen will be updated to the location of the nearest match for the search string.\n"
"\n"
" The previous search string will be shown in brackets after the search prompt.  Hitting Enter without entering any text will perform the previous search.  "
msgstr ""
"搜索命令辅助说明\n"
"\n"
" 首先输入您想要搜索的字符串或字符，然后按下回车键。如果存在着符合您所输入的文字，画面就会更新到最合乎搜索字符串的位置。\n"
"\n"
"最近一次搜索的字符串将会显示在搜索提示符后的括号中。不输入任何文字而直接按下回车键则会重复使用最近一次的搜索条件。"

#: src/help.c:220
msgid ""
"If you have selected text with the mark and then search to replace, only matches in the selected text will be replaced.\n"
"\n"
" The following function keys are available in Search mode:\n"
"\n"
msgstr ""
"如果您已经用标记选择了一段文字并进行搜索替换，就只有在选择文字中符合者将会被替换。\n"
"\n"
" 以下的功能键可用于搜索模式：\n"
"\n"

#: src/help.c:226
msgid ""
"Go To Line Help Text\n"
"\n"
" Enter the line number that you wish to go to and hit Enter.  If there are fewer lines of text than the number you entered, you will be brought to the last line of the file.\n"
"\n"
" The following function keys are available in Go To Line mode:\n"
"\n"
msgstr ""
"跳行辅助说明\n"
"\n"
" 首先输入您想去的行数编号并按下回车键。如果文章中的行数比您所输入少，您将会被带至文件的最后一行。\n"
"\n"
" 以下的功能键可用于跳行模式：\n"
"\n"

#: src/help.c:235
msgid ""
"Insert File Help Text\n"
"\n"
" Type in the name of a file to be inserted into the current file buffer at the current cursor location.\n"
"\n"
" If you have compiled nano with multiple file buffer support, and enable multiple file buffers with the -F or --multibuffer command line flags, the Meta-F toggle, or a nanorc file, inserting a file will cause it to be loaded into a separate buffer (use Meta-< and > to switch between file buffers).  "
msgstr ""
"插入文件辅助说明\n"
"\n"
" 先把文件的名称键入，它将会插入在当前缓冲区的游标所在之处。\n"
"\n"
" 如果您所编译的 nano 支持多重文件缓冲区，并且将此功能以命令列旗标-F 或--multibuffer、Meta-F 开关，或者 nanorc 文件来启动的话，所插入的文件 将会被载入另外的缓冲区中 (利用 Meta-< 和 > 在文件缓冲区间切换)。 "

#: src/help.c:244
msgid ""
"If you need another blank buffer, do not enter any filename, or type in a nonexistent filename at the prompt and press Enter.\n"
"\n"
" The following function keys are available in Insert File mode:\n"
"\n"
msgstr ""
"如果您需要另一个空的缓冲区，那就不要输入任何文件名，或是在提示符号后键入一个不存在的文件名，然后按下回车键。\n"
"\n"
" 以下的功能键可用于插入文件模式：\n"
"\n"

#: src/help.c:250
msgid ""
"Write File Help Text\n"
"\n"
" Type the name that you wish to save the current file as and press Enter to save the file.\n"
"\n"
" If you have selected text with the mark, you will be prompted to save only the selected portion to a separate file.  To reduce the chance of overwriting the current file with just a portion of it, the current filename is not the default in this mode.\n"
"\n"
" The following function keys are available in Write File mode:\n"
"\n"
msgstr ""
"写入文件辅助说明\n"
"\n"
" 先键入您想要以此来储存当前文件的名称，并按下回车键来储存文件。\n"
"\n"
" 如果已经用标记选择了文字，那么您将会被提示，只储存标记部份到另外的档案。为了降低当前文件只被其中部份覆盖的机会，在此模式下，当前的文件名不会成为默认值。\n"
"\n"
" 以下的功能键可用于写入文件模式：\n"
"\n"

#: src/help.c:264
msgid ""
"File Browser Help Text\n"
"\n"
" The file browser is used to visually browse the directory structure to select a file for reading or writing.  You may use the arrow keys or Page Up/Down to browse through the files, and S or Enter to choose the selected file or enter the selected directory.  To move up one level, select the directory called \"..\" at the top of the file list.\n"
"\n"
" The following function keys are available in the file browser:\n"
"\n"
msgstr ""
"文件选单辅助说明\n"
"\n"
" 文件选单是用来视觉化浏览目录结构，以选取要读出或写入的文件。您可以 使用上下左右键或上页/下页来浏览，并用S 或回车键来选取所要的文件或者进入所选的目录。要跳到上层时，选择在文件列表顶端名为 \"..\" 的目录。\n"
"\n"
" 以下的功能键可用于文件选单：\n"
"\n"

#: src/help.c:277
msgid ""
"Browser Search Command Help Text\n"
"\n"
" Enter the words or characters you would like to search for, and then press Enter.  If there is a match for the text you entered, the screen will be updated to the location of the nearest match for the search string.\n"
"\n"
" The previous search string will be shown in brackets after the search prompt.  Hitting Enter without entering any text will perform the previous search.\n"
"\n"
msgstr ""
"搜索命令辅助说明\n"
"\n"
" 首先输入您想要搜索的字符串或字符，然后按下回车键。如果存在著 符合您所输入的文字，画面就会更新到最合乎搜索字符串的位置。\n"
"\n"
" 最近一次搜索的字符串将会显示在搜索提示符号后面的括号中。不输入任何文字而直接按下回车键则会重复最近一次的搜索条件。\n"
"\n"

#: src/help.c:286
msgid ""
" The following function keys are available in Browser Search mode:\n"
"\n"
msgstr ""
"在搜索模式可使用如下的功能键：\n"
"\n"

#: src/help.c:290
msgid ""
"Browser Go To Directory Help Text\n"
"\n"
" Enter the name of the directory you would like to browse to.\n"
"\n"
" If tab completion has not been disabled, you can use the Tab key to (attempt to) automatically complete the directory name.\n"
"\n"
" The following function keys are available in Browser Go To Directory mode:\n"
"\n"
msgstr ""
"跳至目录辅助说明\n"
"\n"
" 先输入您想要浏览的目录名称。\n"
"\n"
" 如果制表符补全的功能没有被关闭，您可以利用制表符(尝试)自动补全目录名称。\n"
"\n"
" 以下的功能键可用于跳至目录模式：\n"
"\n"

#: src/help.c:303
msgid ""
"Spell Check Help Text\n"
"\n"
" The spell checker checks the spelling of all text in the current file.  When an unknown word is encountered, it is highlighted and a replacement can be edited.  It will then prompt to replace every instance of the given misspelled word in the current file, or, if you have selected text with the mark, in the selected text.\n"
"\n"
" The following function keys are available in Spell Check mode:\n"
"\n"
msgstr ""
"拼写检查辅助说明\n"
"\n"
" 拼写检查程序会检查当前文件中所有文字的拼法。当遇到一个未知的字，它会 被标记起来，并让您编辑替代文字。对于当前文件中每一个拼错的字，都会显示 替换的提示；或者，如果已经用标记选择了文字的话，那就只作用于选取的文字之中。\n"
"\n"
" 以下的功能键可用于拼写检查模式：\n"
"\n"

#: src/help.c:318
msgid ""
"Execute Command Help Text\n"
"\n"
" This mode allows you to insert the output of a command run by the shell into the current buffer (or a new buffer in multiple file buffer mode).  If you need another blank buffer, do not enter any command.\n"
"\n"
" The following function keys are available in Execute Command mode:\n"
"\n"
msgstr ""
"执行命令辅助说明\n"
"\n"
" 本选单允许您将shell 执行的命令输出结果，插入当前的缓冲区(或是多重缓冲区模式下的新缓冲区)。如果您需要另一个空白缓冲区，就不要输入任何命令。\n"
"\n"
" 以下的功能键可用于执行命令模式：\n"
"\n"

#: src/help.c:331
msgid ""
"Main nano help text\n"
"\n"
" The nano editor is designed to emulate the functionality and ease-of-use of the UW Pico text editor.  There are four main sections of the editor.  The top line shows the program version, the current filename being edited, and whether or not the file has been modified.  Next is the main editor window showing the file being edited.  The status line is the third line from the bottom and shows important messages.  "
msgstr ""
"nano 辅助说明\n"
"\n"
" nano 编辑器是设计来在功能性及易用性方面，模仿华盛顿大学的Pico 文字编辑器。它包括四个主要部份：顶行显示程序版本、当前被编辑的文件名， 以及是否这文件已经更动过。接着是主要编辑区，显示正在编辑的文件。状态行位于倒数第三行，用来显示重要的信息。底部的两行则显示编辑器中最常用到的快捷键。\n"
"\n"
" "

#: src/help.c:341
#, fuzzy
#| msgid ""
#| "The bottom two lines show the most commonly used shortcuts in the editor.\n"
#| "\n"
#| " The notation for shortcuts is as follows: Control-key sequences are notated with a caret (^) symbol and can be entered either by using the Control (Ctrl) key or pressing the Escape (Esc) key twice.  Escape-key sequences are notated with the Meta (M-) symbol and can be entered using either the Esc, Alt, or Meta key depending on your keyboard setup.  "
msgid ""
"The bottom two lines show the most commonly used shortcuts in the editor.\n"
"\n"
" Shortcuts are written as follows: Control-key sequences are notated with a '^' and can be entered either by using the Ctrl key or pressing the Esc key twice.  Meta-key sequences are notated with 'M-' and can be entered using either the Alt, Cmd, or Esc key, depending on your keyboard setup.  "
msgstr "快捷键的记号定义如下：控制键组(Control-key) 序列是以一个 \"帽子\" (caret, ^)符号来表示，它可以通过Ctrl键或是按两次Esc 键来输入。脱离键组(Escape-key) 序列是以\"中介\" (Meta, M) 符号表示，它可以依照您的键盘设定，利用Esc，Alt 或Meta 来输入。"

#: src/help.c:348
msgid ""
"Also, pressing Esc twice and then typing a three-digit decimal number from 000 to 255 will enter the character with the corresponding value.  The following keystrokes are available in the main editor window.  Alternative keys are shown in parentheses:\n"
"\n"
msgstr ""
"另外，按Esc 两次之后再键入从000 到255 之间的三位数字，则会输入该ASCII 码对应的字符。下列按键组合可用于主要编辑区，替代按键则显示于括号内“\n"
"\n"

#: src/help.c:380 src/help.c:457
msgid "enable/disable"
msgstr "启用/关闭"

#: src/nano.c:544
#, fuzzy
#| msgid "Key invalid in view mode"
msgid "Key is invalid in view mode"
msgstr "观看模式中此按键无效"

#: src/nano.c:550
#, fuzzy
#| msgid "Can't go outside of %s in restricted mode"
msgid "This function is disabled in restricted mode"
msgstr "在限制模式中无法跳至%s 外部"

#: src/nano.c:558
msgid "Help is not available"
msgstr ""

#: src/nano.c:670
#, c-format
msgid ""
"\n"
"Buffer written to %s\n"
msgstr ""
"\n"
"缓冲内容已写入 %s\n"

#: src/nano.c:672
#, c-format
msgid ""
"\n"
"Buffer not written to %s: %s\n"
msgstr ""
"\n"
"缓冲内容未写入至 %s：%s\n"

#: src/nano.c:675
#, c-format
msgid ""
"\n"
"Buffer not written: %s\n"
msgstr ""
"\n"
"缓冲区未写入：%s\n"

#: src/nano.c:701
msgid "Window size is too small for nano...\n"
msgstr "窗口尺寸对 nano 来说太小了...\n"

#: src/nano.c:793
#, c-format
msgid ""
"Usage: nano [OPTIONS] [[+LINE,COLUMN] FILE]...\n"
"\n"
msgstr ""
"用法: nano [选项] [[+行,列] 文件名]...\n"
"\n"

#: src/nano.c:796
#, c-format
msgid "Option\t\tGNU long option\t\tMeaning\n"
msgstr "选项\t\tGNU 长选项\t\t意义\n"

#: src/nano.c:798
#, c-format
msgid "Option\t\tMeaning\n"
msgstr "选项\t\t意义\n"

#: src/nano.c:801
msgid "+LINE,COLUMN"
msgstr "+行,列"

#. TRANSLATORS: The next forty or so strings are option descriptions
#. * for the --help output.  Try to keep them at most 40 characters.
#: src/nano.c:804
msgid "Start at line LINE, column COLUMN"
msgstr "从所指列数与行数开始"

#: src/nano.c:806
msgid "Enable smart home key"
msgstr "启用智能 HOME 键"

#: src/nano.c:808
msgid "Save backups of existing files"
msgstr "储存既有文件的备份"

#: src/nano.c:809
msgid "-C <dir>"
msgstr "-C <目录>"

#: src/nano.c:809
msgid "--backupdir=<dir>"
msgstr "--backupdir=<目录>"

#: src/nano.c:810
msgid "Directory for saving unique backup files"
msgstr "用以储存独一备份文件的目录"

#: src/nano.c:813
msgid "Use bold instead of reverse video text"
msgstr "用粗体替代颜色反转"

#: src/nano.c:815
msgid "Convert typed tabs to spaces"
msgstr "将已输入的制表符转换为空白"

#: src/nano.c:820
msgid "Read a file into a new buffer by default"
msgstr ""

#: src/nano.c:823
msgid "Use (vim-style) lock files"
msgstr ""

#: src/nano.c:828
msgid "Log & read search/replace string history"
msgstr "记录与读取搜索/替换的历史字符串"

#: src/nano.c:832
msgid "Don't look at nanorc files"
msgstr "不要参考nanorc 文件"

#: src/nano.c:835
msgid "Fix numeric keypad key confusion problem"
msgstr "修正数字键区按键混淆问题"

#: src/nano.c:837
msgid "Don't add newlines to the ends of files"
msgstr "不要将换行加到文件末端"

#: src/nano.c:840
msgid "Don't convert files from DOS/Mac format"
msgstr "不要从 DOS/Mac 格式转换"

#: src/nano.c:842
msgid "Use one more line for editing"
msgstr "编辑时多使用一行"

#: src/nano.c:846
msgid "Log & read location of cursor position"
msgstr "记录并读取光标位置"

#: src/nano.c:849
msgid "-Q <str>"
msgstr "-Q <字符串>"

#: src/nano.c:849
msgid "--quotestr=<str>"
msgstr "--quotestr=<字符串>"

#: src/nano.c:849
msgid "Quoting string"
msgstr "引用代表字符串"

#: src/nano.c:852
msgid "Restricted mode"
msgstr "限制模式"

#: src/nano.c:854
msgid "Scroll by line instead of half-screen"
msgstr "按行滚动而不是半屏"

#: src/nano.c:856
msgid "-T <#cols>"
msgstr "-T <#列数>"

#: src/nano.c:856
msgid "--tabsize=<#cols>"
msgstr "--tabsize=<#列数>"

#: src/nano.c:857
msgid "Set width of a tab to #cols columns"
msgstr "设定制表符宽度为 #列数"

#: src/nano.c:859
msgid "Do quick statusbar blanking"
msgstr "状态行快速闪动"

#: src/nano.c:861
msgid "Print version information and exit"
msgstr "显示版本资讯并离开"

#: src/nano.c:864
msgid "Detect word boundaries more accurately"
msgstr "更正确地侦测单字边界"

#: src/nano.c:866
msgid "Which other characters are word parts"
msgstr ""

#: src/nano.c:870
msgid "-Y <str>"
msgstr "-Y <字符串>"

#: src/nano.c:870
msgid "--syntax=<str>"
msgstr "--syntax=<字符串>"

#: src/nano.c:871
msgid "Syntax definition to use for coloring"
msgstr "用于加亮的语法定义"

#: src/nano.c:873
msgid "Constantly show cursor position"
msgstr "持续显示游标位置"

#: src/nano.c:875
msgid "Fix Backspace/Delete confusion problem"
msgstr "修正退格键/删除键混淆问题"

#: src/nano.c:876
#, fuzzy
#| msgid "Display this help text"
msgid "Show this help text and exit"
msgstr "显示帮助"

#: src/nano.c:878
msgid "Automatically indent new lines"
msgstr "自动缩进新行"

#: src/nano.c:879
msgid "Cut from cursor to end of line"
msgstr "从游标剪切至行尾"

#: src/nano.c:882
msgid "Enable the use of the mouse"
msgstr "启用鼠标功能"

#: src/nano.c:884
msgid "Do not read the file (only write it)"
msgstr ""

#: src/nano.c:886
msgid "-o <dir>"
msgstr "-o <目录>"

#: src/nano.c:886
msgid "--operatingdir=<dir>"
msgstr "--operatingdir=<目录>"

#: src/nano.c:887
msgid "Set operating directory"
msgstr "设定操作目录"

#: src/nano.c:889
msgid "Preserve XON (^Q) and XOFF (^S) keys"
msgstr "保留XON (^Q) 和XOFF (^S) 按键"

#: src/nano.c:893
msgid "Silently ignore startup issues like rc file errors"
msgstr "沉默忽略启动问题, 比如rc 文件错误"

#: src/nano.c:896
msgid "-r <#cols>"
msgstr "-r <#列数>"

#: src/nano.c:896
msgid "--fill=<#cols>"
msgstr "--fill=<#列数>"

#: src/nano.c:897
#, fuzzy
#| msgid "Set wrapping point at column #cols"
msgid "Set hard-wrapping point at column #cols"
msgstr "设定折行宽度为 #列数"

#: src/nano.c:901
msgid "-s <prog>"
msgstr "-s <程序>"

#: src/nano.c:901
msgid "--speller=<prog>"
msgstr "--speller=<程序>"

#: src/nano.c:902
msgid "Enable alternate speller"
msgstr "启用替代的拼写检查程序"

#: src/nano.c:904
msgid "Auto save on exit, don't prompt"
msgstr "离开时自动储存，不要提示"

#: src/nano.c:906
msgid "Save a file by default in Unix format"
msgstr ""

#: src/nano.c:908
msgid "View mode (read-only)"
msgstr "查看(只读)模式"

#: src/nano.c:910
#, fuzzy
#| msgid "Don't wrap long lines"
msgid "Don't hard-wrap long lines"
msgstr "不要自动换行"

#: src/nano.c:912
msgid "Don't show the two help lines"
msgstr "不要显示辅助区"

#: src/nano.c:914
msgid "Enable suspension"
msgstr "启用暂停功能"

#: src/nano.c:916
msgid "Enable soft line wrapping"
msgstr "启用软换行"

#: src/nano.c:928
#, fuzzy, c-format
#| msgid " GNU nano version %s (compiled %s, %s)\n"
msgid " nano, version %s\n"
msgstr " GNU nano 版本%s (编译于%s, %s)\n"

#: src/nano.c:931
#, c-format
msgid " (C) 2014..%s the contributors to nano\n"
msgstr ""

#: src/nano.c:933
#, fuzzy, c-format
#| msgid " Email: nano@nano-editor.org\tWeb: http://www.nano-editor.org/"
msgid " Email: nano@nano-editor.org\tWeb: https://nano-editor.org/"
msgstr " 电子邮件: nano@nano-editor.org\t\t网页: http://www.nano-editor.org/"

#: src/nano.c:934
#, c-format
msgid ""
"\n"
" Compiled options:"
msgstr ""
"\n"
" 编译选项："

#: src/nano.c:1054
msgid "No file name"
msgstr ""

#: src/nano.c:1088
msgid "Save modified buffer?  (Answering \"No\" will DISCARD changes.) "
msgstr ""

#: src/nano.c:1149
msgid "Couldn't reopen stdin from keyboard, sorry\n"
msgstr "对不起，无法从键盘设备重新打开标准输入\n"

#: src/nano.c:1173
#, c-format
msgid "Reading from stdin, ^C to abort\n"
msgstr "正在从标准输入读入，可用 ^C 中断\n"

#: src/nano.c:1237
msgid "Received SIGHUP or SIGTERM\n"
msgstr "接收到SIGHUP 或SIGTERM\n"

#: src/nano.c:1253
#, c-format
msgid "Use \"fg\" to return to nano.\n"
msgstr "使用\"fg\" 返回nano\n"

#: src/nano.c:1275
msgid "Suspension is not enabled"
msgstr ""

#: src/nano.c:1429
msgid "enabled"
msgstr "已启用"

#: src/nano.c:1429
msgid "disabled"
msgstr "已禁用"

#: src/nano.c:1543
msgid "Unbound key"
msgstr ""

#: src/nano.c:1546
msgid "Unbindable key: M-["
msgstr ""

#: src/nano.c:1548
#, c-format
msgid "Unbound key: M-%c"
msgstr ""

#: src/nano.c:1550
#, c-format
msgid "Unbound key: ^%c"
msgstr ""

#: src/nano.c:1552
#, c-format
msgid "Unbound key: %c"
msgstr ""

#: src/nano.c:1704
msgid "XON ignored, mumble mumble"
msgstr "忽略XON，嗯嗯。"

#: src/nano.c:1709
msgid "XOFF ignored, mumble mumble"
msgstr "忽略XOFF，嗯嗯。"

#: src/nano.c:2123 src/rcfile.c:1192
#, c-format
msgid "Requested tab size \"%s\" is invalid"
msgstr "所要求的制表符宽度%s 无效"

#: src/nano.c:2187 src/rcfile.c:1130
#, c-format
msgid "Requested fill size \"%s\" is invalid"
msgstr "所要求的填满行数\"%s\" 无效"

#: src/nano.c:2236
#, c-format
msgid "Type '%s -h' for a list of available options.\n"
msgstr ""

#. TRANSLATORS: For the next three strings, if possible, specify
#. * the single-byte shortcuts for both your language and English.
#. * For example, in French: "OoYy" for "Oui".
#: src/prompt.c:802
msgid "Yy"
msgstr "Yy"

#: src/prompt.c:803
msgid "Nn"
msgstr "Nn"

#: src/prompt.c:804
msgid "Aa"
msgstr "Aa"

#: src/prompt.c:826
msgid "Yes"
msgstr "是"

#: src/prompt.c:831
msgid "All"
msgstr "全部"

#: src/prompt.c:836
msgid "No"
msgstr "否"

#: src/rcfile.c:145
#, c-format
msgid "Error in %s on line %lu: "
msgstr "在%s(第%lu 行)中发生错误："

#: src/rcfile.c:204
#, c-format
msgid "Argument '%s' has an unterminated \""
msgstr "参数%s 有未封闭的 \""

#: src/rcfile.c:232 src/rcfile.c:675 src/rcfile.c:726 src/rcfile.c:825
msgid "Regex strings must begin and end with a \" character"
msgstr "正则表示式字符串必须以 \" 字符开始及结束"

#: src/rcfile.c:258 src/search.c:61
#, c-format
msgid "Bad regex \"%s\": %s"
msgstr "非法的正则表示式 \"%s\": %s"

#: src/rcfile.c:280
msgid "Missing syntax name"
msgstr "缺少语法名称"

#: src/rcfile.c:289
msgid "A syntax name must be quoted"
msgstr ""

#: src/rcfile.c:298
msgid "The \"none\" syntax is reserved"
msgstr "\"none\" 语法已被保留"

#: src/rcfile.c:328
#, fuzzy
#| msgid "The \"default\" syntax must take no extensions"
msgid "The \"default\" syntax does not accept extensions"
msgstr "\"default\" 语法必须不含任何副文件名"

#: src/rcfile.c:370
msgid "Missing key name"
msgstr "缺少键名称"

#: src/rcfile.c:379 src/rcfile.c:390
msgid "Key name is too short"
msgstr ""

#: src/rcfile.c:400
#, fuzzy
#| msgid "keybindings must begin with \"^\", \"M\", or \"F\""
msgid "Key name must begin with \"^\", \"M\", or \"F\""
msgstr "键绑定必须以\"^\", \"M\" 或 \"F\" 开始"

#: src/rcfile.c:403
#, fuzzy, c-format
#| msgid "Requested tab size \"%s\" is invalid"
msgid "Key name %s is invalid"
msgstr "所要求的制表符宽度%s 无效"

#: src/rcfile.c:412
#, fuzzy
#| msgid "Must specify function to bind key to"
msgid "Must specify a function to bind the key to"
msgstr "必须指定键绑定到的函数"

#. TRANSLATORS: Do not translate the word "all".
#: src/rcfile.c:422
msgid "Must specify a menu (or \"all\") in which to bind/unbind the key"
msgstr ""

#: src/rcfile.c:429
#, fuzzy, c-format
#| msgid "Could not map name \"%s\" to a function"
msgid "Cannot map name \"%s\" to a function"
msgstr "无法映射名字\"%s\" 到一个函数"

#: src/rcfile.c:436
#, fuzzy, c-format
#| msgid "Could not map name \"%s\" to a menu"
msgid "Cannot map name \"%s\" to a menu"
msgstr "无法映射名字\"%s\" 到一个菜单"

#: src/rcfile.c:468
#, c-format
msgid "Function '%s' does not exist in menu '%s'"
msgstr ""

#: src/rcfile.c:480
#, fuzzy, c-format
#| msgid "Sorry, keystr \"%s\" is an illegal binding"
msgid "Sorry, keystroke \"%s\" may not be rebound"
msgstr "对不起，键\"%s\" 属非法绑定"

#: src/rcfile.c:577
#, fuzzy, c-format
#| msgid "Error reading %s: %s"
msgid "Error expanding %s: %s"
msgstr "读取%s 出错：%s"

#: src/rcfile.c:617
#, c-format
msgid ""
"Color \"%s\" not understood.\n"
"Valid colors are \"green\", \"red\", \"blue\",\n"
"\"white\", \"yellow\", \"cyan\", \"magenta\" and\n"
"\"black\", with the optional prefix \"bright\"\n"
"for foreground colors."
msgstr ""
"颜色 %s 无法识别。\n"
"有效的颜色是 \"green\"(绿)、\"red\"(红)、\"blue\"(蓝)、\n"
"\"white\"(白)、\"yellow\"(黄)、\"cyan\"(青)、\"magenta\"(瑰)和\n"
"\"black\"(黑)，选择性的前置字 \"bright\"(明亮) \n"
"可用于前景色。"

#: src/rcfile.c:638 src/rcfile.c:796 src/rcfile.c:859
#, c-format
msgid "A '%s' command requires a preceding 'syntax' command"
msgstr ""

#: src/rcfile.c:644
msgid "Missing color name"
msgstr "缺少颜色名称"

#: src/rcfile.c:654 src/rcfile.c:808
#, fuzzy, c-format
#| msgid "Missing color name"
msgid "Missing regex string after '%s' command"
msgstr "缺少颜色名称"

#: src/rcfile.c:720
msgid "\"start=\" requires a corresponding \"end=\""
msgstr "\"start=\" 要求对应的\"end=\""

#: src/rcfile.c:769
#, c-format
msgid "Background color \"%s\" cannot be bright"
msgstr "背景色%s 不可为明亮"

#: src/rcfile.c:803
#, fuzzy, c-format
#| msgid "The \"default\" syntax must take no extensions"
msgid "The \"default\" syntax does not accept '%s' regexes"
msgstr "\"default\" 语法必须不含任何副文件名"

#: src/rcfile.c:864
#, fuzzy, c-format
#| msgid "Missing color name"
msgid "Missing command after '%s'"
msgstr "缺少颜色名称"

#: src/rcfile.c:880
#, fuzzy, c-format
#| msgid "Argument '%s' has an unterminated \""
msgid "Argument of '%s' lacks closing \""
msgstr "参数%s 有未封闭的 \""

#: src/rcfile.c:911
#, fuzzy, c-format
#| msgid "Fatal error: no keys mapped for function \"%s\""
msgid "Fatal error: no keys mapped for function \"%s\".  Exiting.\n"
msgstr "严重错误; 没有键映射到函数 \"%s\""

#: src/rcfile.c:913
#, fuzzy, c-format
#| msgid "Exiting.  Please use nano with the -I option if needed to adjust your nanorc settings\n"
msgid "If needed, use nano with the -I option to adjust your nanorc settings.\n"
msgstr "正在退出。如果您想调整您的nanorc 设置，请使用nano 的-I 选项。\n"

#: src/rcfile.c:972
#, fuzzy, c-format
#| msgid "Could not map name \"%s\" to a menu"
msgid "Could not find syntax \"%s\" to extend"
msgstr "无法映射名字\"%s\" 到一个菜单"

#: src/rcfile.c:994 src/rcfile.c:1203
#, c-format
msgid "Syntax \"%s\" has no color commands"
msgstr "语法\"%s\" 没有color 命令"

#: src/rcfile.c:1025
#, c-format
msgid "Command \"%s\" not allowed in included file"
msgstr "命令\"%s\" 被禁止在包含文件中使用"

#: src/rcfile.c:1040
#, c-format
msgid "Command \"%s\" not understood"
msgstr "无法识别\"%s\" 命令"

#: src/rcfile.c:1052
#, fuzzy
#| msgid "Missing color name"
msgid "Missing option"
msgstr "缺少颜色名称"

#: src/rcfile.c:1066
#, fuzzy, c-format
#| msgid "Unknown flag \"%s\""
msgid "Unknown option \"%s\""
msgstr "未知旗标 %s"

#: src/rcfile.c:1079
#, fuzzy, c-format
#| msgid "Cannot unset flag \"%s\""
msgid "Cannot unset option \"%s\""
msgstr "无法解除旗标 %s 设定"

#: src/rcfile.c:1091
#, c-format
msgid "Option \"%s\" requires an argument"
msgstr "选项%s 需要参数"

#: src/rcfile.c:1107
msgid "Option is not a valid multibyte string"
msgstr "选项并非正确的多字节字符串"

#: src/rcfile.c:1141 src/rcfile.c:1162 src/rcfile.c:1169
msgid "Non-blank characters required"
msgstr "需要非空格字符"

#: src/rcfile.c:1148
msgid "Two single-column characters required"
msgstr "需要两个单行字符"

#: src/rcfile.c:1259
msgid "I can't find my home directory!  Wah!"
msgstr "我找不到我的家目录！哇！"

#: src/rcfile.c:1296
#, c-format
msgid ""
"\n"
"Press Enter to continue starting nano.\n"
msgstr ""
"\n"
"按下回车键继续启动 nano\n"

#: src/search.c:95
#, c-format
msgid "\"%.*s%s\" not found"
msgstr "找不到 \"%.*s%s\""

#. TRANSLATORS: The next three strings are modifiers of the search prompt.
#: src/search.c:168
msgid " [Case Sensitive]"
msgstr " [区分大小写]"

#: src/search.c:172
msgid " [Regexp]"
msgstr " [正则表示式]"

#: src/search.c:176
msgid " [Backwards]"
msgstr " [向后搜索]"

#. TRANSLATORS: The next two strings are modifiers of the search prompt.
#: src/search.c:181
msgid " (to replace) in selection"
msgstr " 在标记中(替换)"

#: src/search.c:183
msgid " (to replace)"
msgstr " (替换)"

#. TRANSLATORS: This is shown when searching takes
#. * more than half a second.
#: src/search.c:306
#, fuzzy
#| msgid "Search"
msgid "Searching..."
msgstr "搜索"

#. TRANSLATORS: This is a prompt.
#: src/search.c:692
msgid "Replace this instance?"
msgstr "替换这个？"

#. TRANSLATORS: This is a prompt.
#: src/search.c:837
msgid "Replace with"
msgstr "替换为"

#: src/search.c:872
#, c-format
msgid "Replaced %lu occurrence"
msgid_plural "Replaced %lu occurrences"
msgstr[0] "已替换%lu 处"

#. TRANSLATORS: This is a prompt.
#: src/search.c:911
msgid "Enter line number, column number"
msgstr "输入列号，行号"

#: src/search.c:933
msgid "Invalid line or column number"
msgstr "无效的列号或行号"

#: src/search.c:1086
msgid "Not a bracket"
msgstr "并非一个括号"

#: src/search.c:1152
msgid "No matching bracket"
msgstr "无对应括号"

#: src/text.c:53
msgid "Mark Set"
msgstr "标记设定"

#: src/text.c:57
msgid "Mark Unset"
msgstr "标记解除"

#: src/text.c:69
#, c-format
msgid "Error invoking \"%s\""
msgstr "运行 \"%s\" 错误"

#: src/text.c:461
msgid "Commenting is not supported for this file type"
msgstr ""

#: src/text.c:477
msgid "Cannot comment past end of file"
msgstr ""

#: src/text.c:670
msgid "Nothing in undo buffer!"
msgstr "没有可撤销的操作！"

#. TRANSLATORS: Eight of the next nine strings describe actions
#. * that are undone or redone.  It are all nouns, not verbs.
#: src/text.c:688 src/text.c:717 src/text.c:850 src/text.c:891
msgid "text add"
msgstr "文字增加"

#: src/text.c:698 src/text.c:861
msgid "text delete"
msgstr "文本删除"

#: src/text.c:721 src/text.c:900
msgid "line join"
msgstr "行合并"

#: src/text.c:740 src/text.c:916
msgid "text cut"
msgstr "文字剪切"

#: src/text.c:745 src/text.c:920
msgid "text uncut"
msgstr "取消剪切"

#: src/text.c:751 src/text.c:896
#, fuzzy
#| msgid "Internal error: Redo setup failed.  Please save your work"
msgid "Internal error: line is missing.  Please save your work."
msgstr "内部错误：重做设置失败。请保存您的工作"

#: src/text.c:755 src/text.c:870
msgid "line break"
msgstr "换行符"

#: src/text.c:765 src/text.c:940
msgid "comment"
msgstr ""

#: src/text.c:769 src/text.c:944
msgid "uncomment"
msgstr ""

#: src/text.c:773 src/text.c:931
msgid "text insert"
msgstr "文本插入"

#: src/text.c:793 src/text.c:924
msgid "text replace"
msgstr "文本替换"

#: src/text.c:800 src/text.c:948 src/text.c:1260 src/text.c:1430
msgid "Internal error: unknown type.  Please save your work."
msgstr "内部错误：未知类型。请保存您的工作。"

#: src/text.c:806
#, c-format
msgid "Undid action (%s)"
msgstr "已撤销操作(%s)"

#: src/text.c:825
msgid "Nothing to re-do!"
msgstr "没有可重做的操作！"

#: src/text.c:834
#, fuzzy
#| msgid "Internal error: can't setup uncut.  Please save your work."
msgid "Internal error: cannot set up redo.  Please save your work."
msgstr "内部错误：无法配置取消剪切。请保存您的工作"

#: src/text.c:954
#, c-format
msgid "Redid action (%s)"
msgstr "已重做操作(%s)"

#: src/text.c:1044 src/text.c:2758 src/text.c:3189
msgid "Could not create pipe"
msgstr "无法建立管线功能"

#: src/text.c:1070 src/text.c:2845 src/text.c:2998 src/text.c:3237
#: src/text.c:3529
msgid "Could not fork"
msgstr "执行功能无效"

#: src/text.c:2110
#, c-format
msgid "Bad quote string %s: %s"
msgstr "不良引用字符串%s：%s"

#: src/text.c:2492
msgid "Can now UnJustify!"
msgstr "现在可以还原对齐！"

#: src/text.c:2690
msgid "Edit a replacement"
msgstr "编辑替代文字"

#. TRANSLATORS: Shown after fixing misspellings in one word.
#: src/text.c:2706
#, fuzzy
#| msgid "Next Word"
msgid "Next word..."
msgstr "后一个字"

#: src/text.c:2760
msgid "Creating misspelled word list, please wait..."
msgstr "正在建立错字列表，请稍待..."

#: src/text.c:2851 src/text.c:3244
msgid "Could not get size of pipe buffer"
msgstr "无法得知管线缓冲区大小"

#: src/text.c:2900
msgid "Error invoking \"spell\""
msgstr "运行 \"spell\" 错误"

#: src/text.c:2903
msgid "Error invoking \"sort -f\""
msgstr "运行 \"sort -f\" 错误"

#: src/text.c:2906
msgid "Error invoking \"uniq\""
msgstr "运行 \"uniq\" 错误"

#: src/text.c:3128
#, fuzzy
#| msgid "Invoke the spell checker, if available"
msgid "Invoking spell checker, please wait"
msgstr "尝试运行拼写检查"

#: src/text.c:3142
#, c-format
msgid "Spell checking failed: %s"
msgstr "拼写检查失败：%s"

#: src/text.c:3144
#, c-format
msgid "Spell checking failed: %s: %s"
msgstr "拼写检查失败：%s：%s"

#: src/text.c:3147
msgid "Finished checking spelling"
msgstr "拼写检查结束"

#: src/text.c:3172
#, fuzzy
#| msgid "Don't add newlines to the ends of files"
msgid "No linter defined for this type of file!"
msgstr "不要将换行加到文件末端"

#: src/text.c:3177
msgid "Save modified buffer before linting?"
msgstr ""

#: src/text.c:3194
msgid "Invoking linter, please wait"
msgstr ""

#: src/text.c:3349
#, c-format
msgid "Got 0 parsable lines from command: %s"
msgstr ""

#: src/text.c:3379
#, c-format
msgid "This message is for unopened file %s, open it in a new buffer?"
msgstr ""

#: src/text.c:3398
msgid "No more errors in unopened files, cancelling"
msgstr ""

#: src/text.c:3438
#, fuzzy
#| msgid "Show this message"
msgid "At last message"
msgstr "显示此信息"

#: src/text.c:3443
#, fuzzy
#| msgid "Show this message"
msgid "At first message"
msgstr "显示此信息"

#: src/text.c:3480
msgid "Finished"
msgstr ""

#: src/text.c:3502
msgid "Invoking formatter, please wait"
msgstr ""

#: src/text.c:3557
msgid "Finished formatting"
msgstr ""

#: src/text.c:3639
#, c-format
msgid "%sWords: %lu  Lines: %ld  Chars: %lu"
msgstr "%s字数: %lu  行数: %ld  字符数: %lu"

#: src/text.c:3640
msgid "In Selection:  "
msgstr "于选择部份："

#. TRANSLATORS: This is displayed when the next keystroke will be
#. * inserted verbatim.
#: src/text.c:3654
msgid "Verbatim Input"
msgstr "原形输入"

#: src/utils.c:390 src/utils.c:402
msgid "nano is out of memory!"
msgstr "nano 已耗尽内存！"

#: src/utils.c:622
#, fuzzy, c-format
#| msgid "Internal error: can't match line %d.  Please save your work"
msgid "Internal error: can't match line %d.  Please save your work."
msgstr "内部错误：无法匹配行 %d。请保存您的工作"

#. TRANSLATORS: This refers to a sequence of escape codes
#. * (from the keyboard) that nano does not know about.
#: src/winio.c:1125
msgid "Unknown sequence"
msgstr ""

#. TRANSLATORS: This is shown while a six-digit hexadecimal
#. * Unicode character code (%s) is being typed in.
#: src/winio.c:1289
#, fuzzy, c-format
#| msgid "Unicode Input"
msgid "Unicode Input: %s"
msgstr "Unicode 输入"

#: src/winio.c:1910
msgid "DIR:"
msgstr "目录："

#: src/winio.c:1918
msgid "File:"
msgstr "文件："

#: src/winio.c:1922 src/winio.c:1926
msgid "Modified"
msgstr "已更改"

#: src/winio.c:1924
msgid "View"
msgstr "查看"

#: src/winio.c:3037
#, c-format
msgid "line %ld/%ld (%d%%), col %lu/%lu (%d%%), char %lu/%lu (%d%%)"
msgstr "行 %ld/%ld (%d%%)，列 %lu/%lu (%d%%)，字符 %lu/%lu (%d%%)"

#: src/winio.c:3167
msgid "The nano text editor"
msgstr "nano 文本编辑器"

#: src/winio.c:3168
msgid "version"
msgstr "版本"

#: src/winio.c:3169
msgid "Brought to you by:"
msgstr "来自于:"

#: src/winio.c:3170
msgid "Special thanks to:"
msgstr "特别感谢:"

#: src/winio.c:3171
msgid "The Free Software Foundation"
msgstr "自由软体基金会"

#: src/winio.c:3172
msgid "the many translators and the TP"
msgstr ""

#: src/winio.c:3173
msgid "For ncurses:"
msgstr "ncurses 部份:"

#: src/winio.c:3174
msgid "and anyone else we forgot..."
msgstr "以及其他我们不记得的人..."

#: src/winio.c:3175
msgid "Thank you for using nano!"
msgstr "谢谢您使用 nano！"

#~ msgid "Read %lu line (Converted from DOS and Mac format - Warning: No write permission)"
#~ msgid_plural "Read %lu lines (Converted from DOS and Mac format - Warning: No write permission)"
#~ msgstr[0] "已读取%lu 行(转换自DOS 与Mac 格式- 警告：无写入权限)"

#~ msgid "Read %lu line (Converted from Mac format - Warning: No write permission)"
#~ msgid_plural "Read %lu lines (Converted from Mac format - Warning: No write permission)"
#~ msgstr[0] "已读取%lu 行 (转换自Mac 格式- 警告：无写入权限)"

#~ msgid "Read %lu line (Converted from DOS format - Warning: No write permission)"
#~ msgid_plural "Read %lu lines (Converted from DOS format - Warning: No write permission)"
#~ msgstr[0] "已读取%lu 行 (转换自DOS 格式- 警告：无写入权限)"

#~ msgid "Read %lu line ( Warning: No write permission)"
#~ msgid_plural "Read %lu lines (Warning: No write permission)"
#~ msgstr[0] "已读取%lu 行(警告：无写入权限)"

#~ msgid "Cannot prepend or append to a symlink with --nofollow set"
#~ msgstr "--nofollow 设定下，无法前引或附加至符号连结档"

#~ msgid "Don't follow symbolic links, overwrite"
#~ msgstr "不要依照符号连结，而是覆盖"

#~ msgid "Sorry, support for this function has been disabled"
#~ msgstr "对不起，此功能的支持以禁用"

#~ msgid "Save modified buffer (ANSWERING \"No\" WILL DESTROY CHANGES) ? "
#~ msgstr "储存更动过的缓冲区吗(回答 \"No\" 会撤销修改)？"

#~ msgid "Unknown Command"
#~ msgstr "未知命令"

#~ msgid "Cannot add a color command without a syntax command"
#~ msgstr "无法直接增加颜色而没有语法行"

#~ msgid "Missing regex string"
#~ msgstr "缺少正则表示式字符串"

#~ msgid "Cannot add a header regex without a syntax command"
#~ msgstr "无法直接增加头部正则表达式而没有语法行"

#~ msgid "Cannot add a magic string regex without a syntax command"
#~ msgstr "无法在没有语法命令的情况下添加魔字符串"

#~ msgid "Missing magic string name"
#~ msgstr "缺少魔字符串名称"

#, fuzzy
#~| msgid "Cannot add a header regex without a syntax command"
#~ msgid "Cannot add a linter without a syntax command"
#~ msgstr "无法直接增加头部正则表达式而没有语法行"

#, fuzzy
#~| msgid "Cannot add a color command without a syntax command"
#~ msgid "Cannot add formatter without a syntax command"
#~ msgstr "无法直接增加颜色而没有语法行"

#, fuzzy
#~| msgid "Internal error: can't setup uncut.  Please save your work."
#~ msgid "Internal error: cannot set up uncut.  Please save your work."
#~ msgstr "内部错误：无法配置取消剪切。请保存您的工作"

#~ msgid "Insert File"
#~ msgstr "插入文件"

#~ msgid "Go to previous screen"
#~ msgstr "跳至前一屏"

#~ msgid "Find Other Bracket"
#~ msgstr "寻找其他括号"

#~ msgid "Long line wrapping"
#~ msgstr "长行转换"

#~ msgid "Multiple file buffers"
#~ msgstr "多重文件缓冲区"

#~ msgid "Soft line wrapping"
#~ msgstr "软换行"

#~ msgid "Enable multiple file buffers"
#~ msgstr "启用多重文件缓冲区功能"

#~ msgid "Allow generic undo [EXPERIMENTAL]"
#~ msgstr "允许通用撤销[试验性特性]"

#~ msgid "(ignored, for Pico compatibility)"
#~ msgstr "(忽略，为与Pico 相容)"

#~ msgid "Must specify menu to bind key to (or \"all\")"
#~ msgstr "必须指定键绑定到的菜单(或 \"all\")"

#~ msgid "Missing flag"
#~ msgstr "缺少旗标"

#~ msgid "line wrap"
#~ msgstr "自动换行"

#~ msgid "Internal error: unknown type.  Please save your work"
#~ msgstr "内部错误：未知类型。请保存您的工作"

#~ msgid "Could not pipe"
#~ msgstr "管线功能无效"

#~ msgid "line split"
#~ msgstr "行分割"