# German messages for GNU tar. # This file is distributed under the same license as the tar package. # Copyright (C) 2001 Free Software Foundation, Inc. # Ulrich Drepper , 1995? # Karl Eichwalder , 1996 # Christian Kirsch , 1996, 2001 # Michael Piefel , 2003, 2006, 2007, 2008, 2009, 2010 # #: src/create.c:1552 msgid "" msgstr "" "Project-Id-Version: tar 1.24\n" "Report-Msgid-Bugs-To: bug-tar@gnu.org\n" "POT-Creation-Date: 2010-11-07 17:07+0200\n" "PO-Revision-Date: 2010-10-26 21:35+0200\n" "Last-Translator: Michael Piefel \n" "Language-Team: German \n" "X-Bugs: Report translation errors to the Language-Team address.\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=2; plural=(n != 1);\n" #: gnu/argmatch.c:135 #, c-format msgid "invalid argument %s for %s" msgstr "ungültiges Argument %s für %s" #: gnu/argmatch.c:136 #, c-format msgid "ambiguous argument %s for %s" msgstr "mehrdeutiges Argument %s für %s" #: gnu/argmatch.c:155 #, c-format msgid "Valid arguments are:" msgstr "Zulässige Argumente sind:" #: gnu/argp-help.c:149 #, c-format msgid "ARGP_HELP_FMT: %s value is less than or equal to %s" msgstr "ARGP_HELP_FMT: %s-Wert ist kleiner oder gleich %s" #: gnu/argp-help.c:222 #, c-format msgid "%.*s: ARGP_HELP_FMT parameter requires a value" msgstr "%.*s: ARGP_HELP_FMT-Parameter benötigt einen Wert" #: gnu/argp-help.c:228 #, c-format msgid "%.*s: ARGP_HELP_FMT parameter must be positive" msgstr "%.*s: ARGP_HELP_FMT-Parameter muss positiv sein" #: gnu/argp-help.c:237 #, c-format msgid "%.*s: Unknown ARGP_HELP_FMT parameter" msgstr "%.*s: unbekannter ARGP_HELP_FMT-Parameter" #: gnu/argp-help.c:249 #, c-format msgid "Garbage in ARGP_HELP_FMT: %s" msgstr "Müll in ARGP_HELP_FMT: %s" #: gnu/argp-help.c:1246 msgid "Mandatory or optional arguments to long options are also mandatory or optional for any corresponding short options." msgstr "Erforderliche oder optionale Argumente für lange Optionen sind ebenso erforderlich bzw. optional für die entsprechenden Kurzoptionen." #: gnu/argp-help.c:1639 msgid "Usage:" msgstr "Aufruf:" #: gnu/argp-help.c:1643 msgid " or: " msgstr " oder: " #: gnu/argp-help.c:1655 msgid " [OPTION...]" msgstr " [OPTION...]" #: gnu/argp-help.c:1682 #, c-format msgid "Try `%s --help' or `%s --usage' for more information.\n" msgstr "„%s --help“ oder „%s --usage“ gibt weitere Informationen.\n" #: gnu/argp-help.c:1710 #, c-format msgid "Report bugs to %s.\n" msgstr "Melden Sie Fehler (auf Englisch, mit LC_ALL=C) an %s.\n" #: gnu/argp-help.c:1929 gnu/error.c:183 msgid "Unknown system error" msgstr "Unbekannter Systemfehler." #: gnu/argp-parse.c:83 msgid "give this help list" msgstr "diese Hilfe ausgeben" #: gnu/argp-parse.c:84 msgid "give a short usage message" msgstr "eine kurze Benutzungsübersicht ausgeben" #: gnu/argp-parse.c:85 src/tar.c:489 src/tar.c:491 src/tar.c:560 #: tests/genfile.c:130 msgid "NAME" msgstr "NAME" #: gnu/argp-parse.c:85 msgid "set the program name" msgstr "den Programmnamen setzen" #: gnu/argp-parse.c:86 msgid "SECS" msgstr "SEK" #: gnu/argp-parse.c:87 msgid "hang for SECS seconds (default 3600)" msgstr "für SEK Sekunden hängenbleiben (Voreinst.: 3600)" #: gnu/argp-parse.c:144 msgid "print program version" msgstr "Programmversion ausgeben" #: gnu/argp-parse.c:160 #, c-format msgid "(PROGRAM ERROR) No version known!?" msgstr "(PROGRAMMFEHLER) Keine Version bekannt!?" #: gnu/argp-parse.c:613 #, c-format msgid "%s: Too many arguments\n" msgstr "%s: Zu viele Argumente\n" #: gnu/argp-parse.c:756 msgid "(PROGRAM ERROR) Option should have been recognized!?" msgstr "(PROGRAMMFEHLER) Option hätte erkannt werden müssen!?" #: gnu/closeout.c:114 msgid "write error" msgstr "Schreibfehler" #: gnu/getopt.c:529 gnu/getopt.c:545 #, c-format msgid "%s: option '%s' is ambiguous\n" msgstr "%s: Option „%s“ ist mehrdeutig\n" #: gnu/getopt.c:578 gnu/getopt.c:582 #, c-format msgid "%s: option '--%s' doesn't allow an argument\n" msgstr "%s: Option „--%s“ erlaubt keinen Parameter\n" #: gnu/getopt.c:591 gnu/getopt.c:596 #, c-format msgid "%s: option '%c%s' doesn't allow an argument\n" msgstr "%s: Option „%c%s“ erlaubt keinen Parameter\n" #: gnu/getopt.c:639 gnu/getopt.c:658 #, c-format msgid "%s: option '--%s' requires an argument\n" msgstr "%s: Option „--%s“ benötigt einen Parameter\n" #: gnu/getopt.c:696 gnu/getopt.c:699 #, c-format msgid "%s: unrecognized option '--%s'\n" msgstr "%s: Unbekannte Option „--%s“\n" #: gnu/getopt.c:707 gnu/getopt.c:710 #, c-format msgid "%s: unrecognized option '%c%s'\n" msgstr "%s: Unbekannte Option „%c%s“\n" #: gnu/getopt.c:759 gnu/getopt.c:762 #, c-format msgid "%s: invalid option -- '%c'\n" msgstr "%s: Ungültige Option -- „%c“\n" #: gnu/getopt.c:812 gnu/getopt.c:829 gnu/getopt.c:1037 gnu/getopt.c:1055 #, c-format msgid "%s: option requires an argument -- '%c'\n" msgstr "%s: Option benötigt einen Parameter -- „%c“.\n" #: gnu/getopt.c:885 gnu/getopt.c:901 #, c-format msgid "%s: option '-W %s' is ambiguous\n" msgstr "%s: Option „-W %s“ ist mehrdeutig\n" #: gnu/getopt.c:925 gnu/getopt.c:943 #, c-format msgid "%s: option '-W %s' doesn't allow an argument\n" msgstr "%s: Option „-W %s“ erlaubt keinen Parameter\n" #: gnu/getopt.c:964 gnu/getopt.c:982 #, c-format msgid "%s: option '-W %s' requires an argument\n" msgstr "%s: Option „-W %s“ benötigt einen Parameter\n" #: gnu/obstack.c:425 gnu/obstack.c:427 gnu/xalloc-die.c:36 msgid "memory exhausted" msgstr "Kein Speicher mehr" #: gnu/openat-die.c:36 #, c-format msgid "unable to record current working directory" msgstr "Kann Arbeitsverzeichnis nicht aufzeichnen." #: gnu/openat-die.c:54 #, c-format msgid "failed to return to initial working directory" msgstr "Konnte nicht zu ursprünglichem Arbeitsverzeichnis zurückkehren." #. TRANSLATORS: #. Get translations for open and closing quotation marks. #. #. The message catalog should translate "`" to a left #. quotation mark suitable for the locale, and similarly for #. "'". If the catalog has no translation, #. locale_quoting_style quotes `like this', and #. clocale_quoting_style quotes "like this". #. #. For example, an American English Unicode locale should #. translate "`" to U+201C (LEFT DOUBLE QUOTATION MARK), and #. should translate "'" to U+201D (RIGHT DOUBLE QUOTATION #. MARK). A British English Unicode locale should instead #. translate these to U+2018 (LEFT SINGLE QUOTATION MARK) #. and U+2019 (RIGHT SINGLE QUOTATION MARK), respectively. #. #. If you don't know what to put here, please see #. #. and use glyphs suitable for your language. #: gnu/quotearg.c:274 msgid "`" msgstr "„" #: gnu/quotearg.c:275 msgid "'" msgstr "“" #. TRANSLATORS: A regular expression testing for an affirmative answer #. (english: "yes"). Testing the first character may be sufficient. #. Take care to consider upper and lower case. #. To enquire the regular expression that your system uses for this #. purpose, you can use the command #. locale -k LC_MESSAGES | grep '^yesexpr=' #: gnu/rpmatch.c:149 msgid "^[yY]" msgstr "^[yYjJ]" #. TRANSLATORS: A regular expression testing for a negative answer #. (english: "no"). Testing the first character may be sufficient. #. Take care to consider upper and lower case. #. To enquire the regular expression that your system uses for this #. purpose, you can use the command #. locale -k LC_MESSAGES | grep '^noexpr=' #: gnu/rpmatch.c:162 msgid "^[nN]" msgstr "^[nN]" #: gnu/version-etc.c:76 #, c-format msgid "Packaged by %s (%s)\n" msgstr "Paketiert von %s (%s)\n" #: gnu/version-etc.c:79 #, c-format msgid "Packaged by %s\n" msgstr "Paketiert von %s\n" #. TRANSLATORS: Translate "(C)" to the copyright symbol #. (C-in-a-circle), if this symbol is available in the user's #. locale. Otherwise, do not translate "(C)"; leave it as-is. #: gnu/version-etc.c:86 msgid "(C)" msgstr "©" #: gnu/version-etc.c:88 msgid "" "\n" "License GPLv3+: GNU GPL version 3 or later .\n" "This is free software: you are free to change and redistribute it.\n" "There is NO WARRANTY, to the extent permitted by law.\n" "\n" msgstr "" "\n" "License GPLv3+: GNU GPL Version 3 oder später \n" "Dies ist freie Software: Sie dürfen sie ändern und weiter verbreiten.\n" "Es gibt KEINERLEI GARANTIE, so weit das Gesetz es erlaubt.\n" "\n" #. TRANSLATORS: %s denotes an author name. #: gnu/version-etc.c:104 #, c-format msgid "Written by %s.\n" msgstr "Geschrieben von %s.\n" #. TRANSLATORS: Each %s denotes an author name. #: gnu/version-etc.c:108 #, c-format msgid "Written by %s and %s.\n" msgstr "Geschrieben von %s und %s.\n" #. TRANSLATORS: Each %s denotes an author name. #: gnu/version-etc.c:112 #, c-format msgid "Written by %s, %s, and %s.\n" msgstr "Geschrieben von %s, %s und %s.\n" #. TRANSLATORS: Each %s denotes an author name. #. You can use line breaks, estimating that each author name occupies #. ca. 16 screen columns and that a screen line has ca. 80 columns. #: gnu/version-etc.c:119 #, c-format msgid "" "Written by %s, %s, %s,\n" "and %s.\n" msgstr "" "Geschrieben von %s, %s, %s\n" "und %s.\n" #. TRANSLATORS: Each %s denotes an author name. #. You can use line breaks, estimating that each author name occupies #. ca. 16 screen columns and that a screen line has ca. 80 columns. #: gnu/version-etc.c:126 #, c-format msgid "" "Written by %s, %s, %s,\n" "%s, and %s.\n" msgstr "" "Geschrieben von %s, %s, %s,\n" "%s und %s.\n" #. TRANSLATORS: Each %s denotes an author name. #. You can use line breaks, estimating that each author name occupies #. ca. 16 screen columns and that a screen line has ca. 80 columns. #: gnu/version-etc.c:133 #, c-format msgid "" "Written by %s, %s, %s,\n" "%s, %s, and %s.\n" msgstr "" "Geschrieben von %s, %s, %s,\n" "%s, %s und %s.\n" #. TRANSLATORS: Each %s denotes an author name. #. You can use line breaks, estimating that each author name occupies #. ca. 16 screen columns and that a screen line has ca. 80 columns. #: gnu/version-etc.c:141 #, c-format msgid "" "Written by %s, %s, %s,\n" "%s, %s, %s, and %s.\n" msgstr "" "Geschrieben von %s, %s, %s,\n" "%s, %s, %s und %s.\n" #. TRANSLATORS: Each %s denotes an author name. #. You can use line breaks, estimating that each author name occupies #. ca. 16 screen columns and that a screen line has ca. 80 columns. #: gnu/version-etc.c:149 #, c-format msgid "" "Written by %s, %s, %s,\n" "%s, %s, %s, %s,\n" "and %s.\n" msgstr "" "Geschrieben von %s, %s, %s,\n" "%s, %s, %s, %s\n" "und %s.\n" #. TRANSLATORS: Each %s denotes an author name. #. You can use line breaks, estimating that each author name occupies #. ca. 16 screen columns and that a screen line has ca. 80 columns. #: gnu/version-etc.c:158 #, c-format msgid "" "Written by %s, %s, %s,\n" "%s, %s, %s, %s,\n" "%s, and %s.\n" msgstr "" "Geschrieben von %s, %s, %s,\n" "%s, %s, %s, %s,\n" "%s und %s.\n" #. TRANSLATORS: Each %s denotes an author name. #. You can use line breaks, estimating that each author name occupies #. ca. 16 screen columns and that a screen line has ca. 80 columns. #: gnu/version-etc.c:169 #, c-format msgid "" "Written by %s, %s, %s,\n" "%s, %s, %s, %s,\n" "%s, %s, and others.\n" msgstr "" "Geschrieben von %s, %s, %s,\n" "%s, %s, %s, %s,\n" "%s, %s und anderen.\n" #. TRANSLATORS: The placeholder indicates the bug-reporting address #. for this package. Please add _another line_ saying #. "Report translation bugs to <...>\n" with the address for translation #. bugs (typically your translation team's web or email address). #: gnu/version-etc.c:247 #, c-format msgid "" "\n" "Report bugs to: %s\n" msgstr "" "\n" "Melden Sie Fehler (auf Englisch, mit LC_ALL=C) an: %s\n" #: gnu/version-etc.c:249 #, c-format msgid "Report %s bugs to: %s\n" msgstr "Melden Sie Fehler in %s (auf Englisch, mit LC_ALL=C) an: %s\n" #: gnu/version-etc.c:253 #, c-format msgid "%s home page: <%s>\n" msgstr "Homepage von %s: <%s>\n" #: gnu/version-etc.c:255 #, c-format msgid "%s home page: \n" msgstr "Homepage von %s: \n" #: gnu/version-etc.c:258 msgid "General help using GNU software: \n" msgstr "Allgemeine Hilfe zu GNU-Software: \n" #. TRANSLATORS: %s after `Cannot' is a function name, e.g. `Cannot open'. #. Directly translating this to another language will not work, first because #. %s itself is not translated. #. Translate it as `%s: Function %s failed'. #: lib/paxerror.c:58 lib/paxerror.c:71 #, c-format msgid "%s: Cannot %s" msgstr "%s: Kann %s nicht ausführen" #. TRANSLATORS: %s after `Cannot' is a function name, e.g. `Cannot open'. #. Directly translating this to another language will not work, first because #. %s itself is not translated. #. Translate it as `%s: Function %s failed'. #: lib/paxerror.c:84 #, c-format msgid "%s: Warning: Cannot %s" msgstr "%s: Warnung: Kann %s nicht ausführen" #: lib/paxerror.c:93 #, c-format msgid "%s: Cannot change mode to %s" msgstr "%s: Kann Zugriffsrechte nicht zu %s ändern" #: lib/paxerror.c:101 #, c-format msgid "%s: Cannot change ownership to uid %lu, gid %lu" msgstr "%s: Kann Datei-Eigentümer nicht zu uid %lu, gid %lu ändern" #: lib/paxerror.c:127 #, c-format msgid "%s: Cannot hard link to %s" msgstr "%s: Kann keine harte Verknüpfung zu „%s“ anlegen" #: lib/paxerror.c:179 lib/paxerror.c:211 #, c-format msgid "%s: Read error at byte %s, while reading %lu byte" msgid_plural "%s: Read error at byte %s, while reading %lu bytes" msgstr[0] "%s: Lesefehler bei Byte %s beim Lesen von einem Byte" msgstr[1] "%s: Lesefehler bei Byte %s beim Lesen von %lu Bytes" #: lib/paxerror.c:192 #, c-format msgid "%s: Warning: Read error at byte %s, while reading %lu byte" msgid_plural "%s: Warning: Read error at byte %s, while reading %lu bytes" msgstr[0] "%s: Warnung: Lesefehler bei Byte %s beim Lesen von einem Byte" msgstr[1] "%s: Warnung: Lesefehler bei Byte %s beim Lesen von %lu Bytes" #: lib/paxerror.c:259 #, c-format msgid "%s: Cannot seek to %s" msgstr "%s: Kann nicht auf %s positionieren" #: lib/paxerror.c:275 #, c-format msgid "%s: Warning: Cannot seek to %s" msgstr "%s: Warnung: Kann nicht auf %s positionieren" #: lib/paxerror.c:284 #, c-format msgid "%s: Cannot create symlink to %s" msgstr "%s: Kann keine symbolische Verknüpfung zu „%s“ anlegen" #: lib/paxerror.c:349 #, c-format msgid "%s: Wrote only %lu of %lu byte" msgid_plural "%s: Wrote only %lu of %lu bytes" msgstr[0] "%s: Nur %lu von einem Byte geschrieben" msgstr[1] "%s: Nur %lu von %lu Bytes geschrieben" #: lib/paxnames.c:155 #, c-format msgid "Removing leading `%s' from member names" msgstr "Entferne führende „%s“ von Elementnamen" #: lib/paxnames.c:156 #, c-format msgid "Removing leading `%s' from hard link targets" msgstr "Entferne führende „%s“ von Zielen harter Verknüpfungen" #: lib/paxnames.c:169 msgid "Substituting `.' for empty member name" msgstr "Ersetze „.“ für leeren Elementnamen" #: lib/paxnames.c:170 msgid "Substituting `.' for empty hard link target" msgstr "Ersetze „.“ für leeres Ziel einer harten Verknüpfung" #: lib/rtapelib.c:299 #, c-format msgid "exec/tcp: Service not available" msgstr "exec/tcp: Service nicht verfügbar." #: lib/rtapelib.c:303 #, c-format msgid "stdin" msgstr "Standardeingabe" #: lib/rtapelib.c:306 #, c-format msgid "stdout" msgstr "Standardausgabe" #: lib/rtapelib.c:429 #, c-format msgid "Cannot connect to %s: resolve failed" msgstr "Kann nicht mit %s verbinden: Auflösung fehlgeschlagen" #: lib/rtapelib.c:515 #, c-format msgid "Cannot execute remote shell" msgstr "Kann Remote-Shell nicht ausführen." #: rmt/rmt.c:432 msgid "Seek direction out of range" msgstr "Richtung für Positionierung nicht zulässig." #: rmt/rmt.c:438 msgid "Invalid seek direction" msgstr "Ungültige Richtung für Positionierung" #: rmt/rmt.c:446 msgid "Invalid seek offset" msgstr "Ungültiger Betrag für Positionierung" #: rmt/rmt.c:452 msgid "Seek offset out of range" msgstr "Positionierungsangabe außerhalb des zulässigen Bereichs." #: rmt/rmt.c:493 rmt/rmt.c:544 rmt/rmt.c:608 msgid "Invalid byte count" msgstr "Ungültige Bytezahl" #: rmt/rmt.c:499 rmt/rmt.c:550 rmt/rmt.c:614 rmt/rmt.c:625 msgid "Byte count out of range" msgstr "Bytezahl außerhalb des zulässigen Bereichs" #: rmt/rmt.c:558 msgid "Premature eof" msgstr "Vorzeitiges Dateiende" #: rmt/rmt.c:601 msgid "Invalid operation code" msgstr "Ungültiger Arbeitsmodus" #: rmt/rmt.c:636 rmt/rmt.c:680 msgid "Operation not supported" msgstr "Operation nicht gestattet" #: rmt/rmt.c:664 msgid "Unexpected arguments" msgstr "Unerwartete Argumente" #: rmt/rmt.c:689 msgid "Manipulate a tape drive, accepting commands from a remote process" msgstr "Ein Bandlaufwerk bearbeiten, dabei Befehle von entferntem Prozess annehmen" #: rmt/rmt.c:696 src/tar.c:424 src/tar.c:428 src/tar.c:558 src/tar.c:573 #: src/tar.c:704 src/tar.c:742 tests/genfile.c:166 msgid "NUMBER" msgstr "ZAHL" #: rmt/rmt.c:697 msgid "set debug level" msgstr "Debug-Level setzen" #: rmt/rmt.c:698 src/tar.c:422 src/tar.c:563 src/tar.c:639 src/tar.c:643 #: src/tar.c:655 src/tar.c:665 src/tar.c:668 src/tar.c:670 src/tar.c:759 #: tests/genfile.c:132 tests/genfile.c:180 tests/genfile.c:184 #: tests/genfile.c:187 tests/genfile.c:193 msgid "FILE" msgstr "DATEI" #: rmt/rmt.c:699 msgid "set debug output file name" msgstr "Dateinamen für Debug-Ausschriften setzen" #: rmt/rmt.c:715 rmt/rmt.c:783 #, c-format msgid "cannot open %s" msgstr "kann „%s“ nicht öffnen" #: rmt/rmt.c:780 tests/genfile.c:884 tests/genfile.c:901 #, c-format msgid "too many arguments" msgstr "zu viele Argumente" #: rmt/rmt.c:822 msgid "Garbage command" msgstr "Ungültiger Befehl" #: src/buffer.c:457 src/buffer.c:462 src/buffer.c:706 src/buffer.c:1321 #: src/buffer.c:1367 src/buffer.c:1396 src/delete.c:211 src/list.c:245 #: src/update.c:200 msgid "This does not look like a tar archive" msgstr "Das sieht nicht wie ein „tar“-Archiv aus." #: src/buffer.c:521 src/buffer.c:530 msgid "Total bytes written" msgstr "Gesamtzahl geschriebener Bytes" #: src/buffer.c:528 src/buffer.c:542 msgid "Total bytes read" msgstr "Gesamtzahl gelesener Bytes" #: src/buffer.c:532 #, c-format msgid "Total bytes deleted: %s\n" msgstr "Gesamtzahl gelöschter Bytes: %s\n" #: src/buffer.c:621 msgid "(pipe)" msgstr "(pipe)" #: src/buffer.c:644 msgid "Invalid value for record_size" msgstr "Ungültiger Wert für „record_size“." #: src/buffer.c:647 msgid "No archive name given" msgstr "Kein Archivname angegeben" #: src/buffer.c:689 msgid "Cannot verify stdin/stdout archive" msgstr "Kann Archive auf Standard-Ein-/Ausgabe nicht prüfen." #: src/buffer.c:703 #, c-format msgid "Archive is compressed. Use %s option" msgstr "Archiv ist komprimiert. Benutzen Sie die Option %s." #: src/buffer.c:760 src/tar.c:2448 msgid "Cannot update compressed archives" msgstr "Kann komprimierte Archive nicht aktualisieren" #: src/buffer.c:853 msgid "At beginning of tape, quitting now" msgstr "Am Anfang des Mediums, beende jetzt." #: src/buffer.c:859 msgid "Too many errors, quitting" msgstr "Zu viele Fehler, beende." #: src/buffer.c:892 #, c-format msgid "Record size = %lu block" msgid_plural "Record size = %lu blocks" msgstr[0] "Recordgröße = %lu Block" msgstr[1] "Recordgröße = %lu Blöcke" #: src/buffer.c:913 #, c-format msgid "Unaligned block (%lu byte) in archive" msgid_plural "Unaligned block (%lu bytes) in archive" msgstr[0] "Falsch ausgerichteter Block (ein Byte) im Archiv." msgstr[1] "Falsch ausgerichteter Block (%lu Bytes) im Archiv." #: src/buffer.c:990 msgid "Cannot backspace archive file; it may be unreadable without -i" msgstr "Kann Archiv-Datei nicht zurücksetzen; könnte ohne „-i“ unlesbar sein." #: src/buffer.c:1022 msgid "rmtlseek not stopped at a record boundary" msgstr "„rmtlseek“ nicht an Recordgrenze angehalten" #: src/buffer.c:1073 #, c-format msgid "%s: contains invalid volume number" msgstr "%s: enthält ungültige Teil-Nummer." #: src/buffer.c:1108 msgid "Volume number overflow" msgstr "Teil-Nummer zu groß." #: src/buffer.c:1123 #, c-format msgid "Prepare volume #%d for %s and hit return: " msgstr "Medium #%d für %s einlegen und Eingabetaste drücken: " #: src/buffer.c:1129 msgid "EOF where user reply was expected" msgstr "Dateiende gefunden, Benutzereingabe erwartet" #: src/buffer.c:1134 src/buffer.c:1166 msgid "WARNING: Archive is incomplete" msgstr "WARNUNG: Archiv unvollständig" #: src/buffer.c:1148 #, c-format msgid "" " n name Give a new file name for the next (and subsequent) volume(s)\n" " q Abort tar\n" " y or newline Continue operation\n" msgstr "" " n Name für die nächsten (und folgenden) Medien neuen Dateinamen angeben\n" " q „tar“ abbrechen\n" " j oder Enter fortfahren\n" #: src/buffer.c:1153 #, c-format msgid " ! Spawn a subshell\n" msgstr " ! Shell in einem Unterprozess starten\n" #: src/buffer.c:1154 #, c-format msgid " ? Print this list\n" msgstr " ? diese Liste ausgeben\n" #: src/buffer.c:1161 msgid "No new volume; exiting.\n" msgstr "Kein neues Medium; halte an.\n" #: src/buffer.c:1194 msgid "File name not specified. Try again.\n" msgstr "Dateiname nicht angegeben. Versuchen Sie es noch einmal.\n" #: src/buffer.c:1207 #, c-format msgid "Invalid input. Type ? for help.\n" msgstr "Ungültige Eingabe. Geben Sie „?“ für Hilfe ein.\n" #: src/buffer.c:1258 #, c-format msgid "%s command failed" msgstr "„%s“-Befehl gescheitert." #: src/buffer.c:1439 #, c-format msgid "%s is possibly continued on this volume: header contains truncated name" msgstr "%s wird möglicherweise auf diesem Teil fortgesetzt: Kopf enthält abgeschnittenen Namen." #: src/buffer.c:1443 #, c-format msgid "%s is not continued on this volume" msgstr "Dieser Teil ist keine Fortsetzung von %s." #: src/buffer.c:1457 #, c-format msgid "%s is the wrong size (%s != %s + %s)" msgstr "%s hat die falsche Größe (%s != %s + %s)." #: src/buffer.c:1472 #, c-format msgid "This volume is out of sequence (%s - %s != %s)" msgstr "Dieser Teil ist nicht an der Reihe (%s - %s != %s)." #: src/buffer.c:1550 src/buffer.c:1576 #, c-format msgid "Archive not labeled to match %s" msgstr "Kennzeichnung des Archivs passt nicht zu „%s“." #: src/buffer.c:1580 #, c-format msgid "Volume %s does not match %s" msgstr "Teil „%s“ passt nicht zu „%s“." #: src/buffer.c:1674 #, c-format msgid "%s: file name too long to be stored in a GNU multivolume header, truncated" msgstr "%s: Dateiname zu lang, um in einem GNU-Mehrteil-Kopf abgelegt werden zu können, abgeschnitten" #: src/buffer.c:1865 msgid "write did not end on a block boundary" msgstr "Schreiben endete nicht an Blockgrenze" #: src/compare.c:95 #, c-format msgid "Could only read %lu of %lu byte" msgid_plural "Could only read %lu of %lu bytes" msgstr[0] "Konnte nur %lu von %lu Byte lesen" msgstr[1] "Konnte nur %lu von %lu Bytes lesen" #: src/compare.c:105 src/compare.c:382 msgid "Contents differ" msgstr "Unterschiedliche Inhalte" #: src/compare.c:131 src/extract.c:972 src/incremen.c:1462 src/list.c:458 #: src/list.c:1392 src/xheader.c:711 msgid "Unexpected EOF in archive" msgstr "Unerwartetes Dateiende im Archiv." #: src/compare.c:179 src/compare.c:195 src/compare.c:308 src/compare.c:406 msgid "File type differs" msgstr "Unterschiedliche Dateitypen " #: src/compare.c:182 src/compare.c:202 src/compare.c:322 msgid "Mode differs" msgstr "Modus ist unterschiedlich" #: src/compare.c:205 msgid "Uid differs" msgstr "Benutzerkennung ist unterschiedlich" #: src/compare.c:207 msgid "Gid differs" msgstr "Gruppenkennung ist unterschiedlich" #: src/compare.c:211 msgid "Mod time differs" msgstr "Änderungszeit ist unterschiedlich" #: src/compare.c:215 src/compare.c:414 msgid "Size differs" msgstr "Größe ist unterschiedlich" #: src/compare.c:263 #, c-format msgid "Not linked to %s" msgstr "Nicht mit „%s“ verknüpft" #: src/compare.c:287 msgid "Symlink differs" msgstr "Symbolische Verknüpfung ist unterschiedlich" #: src/compare.c:316 msgid "Device number differs" msgstr "Unterschiedliche Gerätenummern" #: src/compare.c:456 #, c-format msgid "Verify " msgstr "Prüfe " #: src/compare.c:463 #, c-format msgid "%s: Unknown file type `%c', diffed as normal file" msgstr "%s: Unbekannter Dateityp „%c“, Differenz wie für eine normale Datei." #: src/compare.c:518 msgid "Archive contains file names with leading prefixes removed." msgstr "Archiv enthält Dateinamen, deren Präfixe entfernt wurden." #: src/compare.c:520 msgid "Verification may fail to locate original files." msgstr "Die Überprüfung findet möglicherweise die Originaldateien nicht." #: src/compare.c:593 #, c-format msgid "VERIFY FAILURE: %d invalid header detected" msgid_plural "VERIFY FAILURE: %d invalid headers detected" msgstr[0] "FEHLER BEI PRÜFUNG: %d ungültiger Kopfteil erkannt." msgstr[1] "FEHLER BEI PRÜFUNG: %d ungültige Kopfteile erkannt." #: src/compare.c:611 src/list.c:222 #, c-format msgid "A lone zero block at %s" msgstr "Ein einzelner Nullblock bei %s" #: src/create.c:72 #, c-format msgid "%s: contains a cache directory tag %s; %s" msgstr "%s: enthält eine „Cache-Verzeichnis“-Markierung %s; %s" #: src/create.c:261 #, c-format msgid "value %s out of %s range %s..%s; substituting %s" msgstr "Wert %s außerhalb des %s-Bereich %s..%s; ersetze durch %s" #: src/create.c:267 #, c-format msgid "value %s out of %s range %s..%s" msgstr "Wert %s außerhalb des %s-Bereichs %s..%s" #: src/create.c:327 msgid "Generating negative octal headers" msgstr "Erzeuge negative oktale Kopfteile" #: src/create.c:612 src/create.c:675 #, c-format msgid "%s: file name is too long (max %d); not dumped" msgstr "%s: Dateiname ist zu lang (max. %d); nicht gesichert." #: src/create.c:622 #, c-format msgid "%s: file name is too long (cannot be split); not dumped" msgstr "%s: Dateiname ist zu lang (kann nicht aufgeteilt werden); nicht gesichert." #: src/create.c:649 #, c-format msgid "%s: link name is too long; not dumped" msgstr "%s: Verknüpfungsname ist zu lang; nicht gesichert." #: src/create.c:1064 #, c-format msgid "%s: File shrank by %s byte; padding with zeros" msgid_plural "%s: File shrank by %s bytes; padding with zeros" msgstr[0] "Datei %s ist um ein Byte geschrumpft, fülle mit Null auf." msgstr[1] "Datei %s ist um %s Bytes geschrumpft, fülle mit Nullen auf." #: src/create.c:1160 #, c-format msgid "%s: file is on a different filesystem; not dumped" msgstr "Datei %s liegt auf einem anderen Dateisystem; nicht gesichert." #: src/create.c:1203 src/create.c:1214 src/incremen.c:582 src/incremen.c:588 msgid "contents not dumped" msgstr "Inhalt nicht gesichert" #: src/create.c:1418 #, c-format msgid "%s: Unknown file type; file ignored" msgstr "%s: Unbekannter Dateityp; Datei ignoriert." #: src/create.c:1529 #, c-format msgid "Missing links to %s." msgstr "Fehlende Verknüpfungen zu %s." #: src/create.c:1690 #, c-format msgid "%s: file is unchanged; not dumped" msgstr "Datei %s ist unverändert; nicht gesichert." #: src/create.c:1699 #, c-format msgid "%s: file is the archive; not dumped" msgstr "%s ist das Archiv; nicht gesichert." #: src/create.c:1723 src/incremen.c:575 msgid "directory not dumped" msgstr "Verzeichnis nicht gesichert" #: src/create.c:1795 #, c-format msgid "%s: file changed as we read it" msgstr "%s: Datei hat sich beim Lesen geändert." #: src/create.c:1857 #, c-format msgid "%s: socket ignored" msgstr "%s: Socket ignoriert" #: src/create.c:1863 #, c-format msgid "%s: door ignored" msgstr "%s: Klappe ignoriert" #: src/delete.c:217 src/list.c:259 src/update.c:205 msgid "Skipping to next header" msgstr "Springe zum nächsten Kopfteil." #: src/delete.c:283 msgid "Deleting non-header from archive" msgstr "Lösche nicht-Kopfteil aus dem Archiv" #: src/extract.c:277 #, c-format msgid "%s: implausibly old time stamp %s" msgstr "%s: unplausibel alter Zeitstempel %s" #: src/extract.c:295 #, c-format msgid "%s: time stamp %s is %s s in the future" msgstr "%s: Zeitstempel %s liegt %s Sekunden in der Zukunft." #: src/extract.c:475 #, c-format msgid "%s: Unexpected inconsistency when making directory" msgstr "%s: Unerwarteter Inkonsitenz beim Erstellen des Verzeichnisses." #: src/extract.c:709 #, c-format msgid "%s: Directory renamed before its status could be extracted" msgstr "%s: Verzeichnis umbenannt bevor sein Status ermittelt werden konnte" #: src/extract.c:863 msgid "Extracting contiguous files as regular files" msgstr "Extrahiere zusammenhängende Dateien („contiguous files“) als reguläre." #: src/extract.c:1197 msgid "Attempting extraction of symbolic links as hard links" msgstr "Versuche symbolische Verknüpfungen als harte Verknüpfungen herauszuholen." #: src/extract.c:1353 #, c-format msgid "%s: Cannot extract -- file is continued from another volume" msgstr "Kann „%s“ nicht herausholen – Datei ist Fortsetzung eines anderen Teils." #: src/extract.c:1360 src/list.c:1125 msgid "Unexpected long name header" msgstr "Unerwarteter Kopfteil mit langem Namen" #: src/extract.c:1367 #, c-format msgid "%s: Unknown file type `%c', extracted as normal file" msgstr "%s: Unbekannter Dateityp „%c“, wie normale Datei extrahiert." #: src/extract.c:1393 #, c-format msgid "Current %s is newer or same age" msgstr "Aktuelles %s ist neuer oder hat dasselbe Alter." #: src/extract.c:1445 #, c-format msgid "%s: Was unable to backup this file" msgstr "%s: Konnte keine Sicherheitskopie von dieser Datei erstellen" #: src/extract.c:1582 #, c-format msgid "Cannot rename %s to %s" msgstr "Kann %s nicht in %s umbenennen." #: src/incremen.c:474 src/incremen.c:518 #, c-format msgid "%s: Directory has been renamed from %s" msgstr "%s: Verzeichnis wurde von „%s“ umbenannt." #: src/incremen.c:486 #, c-format msgid "%s: Directory has been renamed" msgstr "%s: Verzeichnis wurde umbenannt." #: src/incremen.c:531 #, c-format msgid "%s: Directory is new" msgstr "Verzeichnis „%s“ ist neu." #: src/incremen.c:956 src/incremen.c:973 msgid "Invalid time stamp" msgstr "Ungültiger Zeitstempel" #: src/incremen.c:1012 msgid "Invalid modification time (seconds)" msgstr "Ungültige Änderungszeit (Sekunden)." #: src/incremen.c:1027 msgid "Invalid modification time (nanoseconds)" msgstr "Ungültige Änderungszeit (Nanosekunden)." #: src/incremen.c:1047 msgid "Invalid device number" msgstr "Ungültige Gerätenummer" #: src/incremen.c:1062 msgid "Invalid inode number" msgstr "Ungültige Inode-Nummer" #: src/incremen.c:1113 src/incremen.c:1150 msgid "Field too long while reading snapshot file" msgstr "Feld zu lang beim Lesen der Schnappschussdatei" #: src/incremen.c:1120 src/incremen.c:1158 msgid "Read error in snapshot file" msgstr "Lesefehler in Schnappschussdatei" #: src/incremen.c:1122 src/incremen.c:1162 src/incremen.c:1214 #: src/incremen.c:1272 msgid "Unexpected EOF in snapshot file" msgstr "Unerwartetes Dateiende im Schnappschussdatei." #: src/incremen.c:1129 src/incremen.c:1169 msgid "Unexpected field value in snapshot file" msgstr "Unerwarteter Feldwert in Schnappschussdatei" #: src/incremen.c:1264 msgid "Missing record terminator" msgstr "Fehlender Record-Abschluss" #: src/incremen.c:1325 src/incremen.c:1328 msgid "Bad incremental file format" msgstr "unzulässiges inkrementelles Dateiformat" #: src/incremen.c:1347 #, c-format msgid "Unsupported incremental format version: %" msgstr "Nicht unterstützte Version des inkrementellen Formats: %" #: src/incremen.c:1502 #, c-format msgid "Malformed dumpdir: expected '%c' but found %#3o" msgstr "Fehlgeformtes Verzeichnis für Dump: „%c“ erwartet, aber %#3o gefunden" #: src/incremen.c:1512 msgid "Malformed dumpdir: 'X' duplicated" msgstr "Fehlgeformtes Verzeichnis für Dump: „X“ dupliziert" #: src/incremen.c:1525 msgid "Malformed dumpdir: empty name in 'R'" msgstr "Fehlgeformtes Verzeichnis für Dump: leerer Name in „R“" #: src/incremen.c:1538 msgid "Malformed dumpdir: 'T' not preceeded by 'R'" msgstr "Fehlgeformtes Verzeichnis für Dump: „T“ folgt nicht „R“" #: src/incremen.c:1544 msgid "Malformed dumpdir: empty name in 'T'" msgstr "Fehlgeformtes Verzeichnis für Dump: leerer Name in „T“" #: src/incremen.c:1564 #, c-format msgid "Malformed dumpdir: expected '%c' but found end of data" msgstr "Fehlgeformtes Verzeichnis für Dump: „%c“ erwartet, aber Ende der Daten gefunden" #: src/incremen.c:1571 msgid "Malformed dumpdir: 'X' never used" msgstr "Fehlgeformtes Verzeichnis für Dump: „X“ nie benutzt" #: src/incremen.c:1615 #, c-format msgid "Cannot create temporary directory using template %s" msgstr "Kann kein temporäres Verzeichnis mit der Schablone %s anlegen" #: src/incremen.c:1677 #, c-format msgid "%s: Not purging directory: unable to stat" msgstr "%s: Entferne Verzeichnis nicht: kann nicht zugreifen" #: src/incremen.c:1690 #, c-format msgid "%s: directory is on a different device: not purging" msgstr "%s: Verzeichnis liegt auf einem anderen Dateisystem: entferne nicht." #: src/incremen.c:1698 #, c-format msgid "%s: Deleting %s\n" msgstr "%s: Lösche %s.\n" #: src/incremen.c:1703 #, c-format msgid "%s: Cannot remove" msgstr "%s: Kann nicht entfernen." #: src/list.c:190 #, c-format msgid "%s: Omitting" msgstr "%s: Ausgelassen" #: src/list.c:207 #, c-format msgid "block %s: ** Block of NULs **\n" msgstr "Block %s: ** Block aus NULlen **\n" #: src/list.c:233 #, c-format msgid "block %s: ** End of File **\n" msgstr "Block %s: ** Ende der Datei **\n" #: src/list.c:256 src/list.c:1097 src/list.c:1360 #, c-format msgid "block %s: " msgstr "Block %s: " #. TRANSLATORS: %s is type of the value (gid_t, uid_t, #. etc.) #: src/list.c:712 #, c-format msgid "Blanks in header where numeric %s value expected" msgstr "Leerzeichen im Kopfteil, wo numerische %s-Werte stehen sollten." #. TRANSLATORS: Second %s is a type name (gid_t,uid_t,etc.) #: src/list.c:767 #, c-format msgid "Archive octal value %.*s is out of %s range; assuming two's complement" msgstr "Oktalzahl %.*s außerhalb des %s-Bereichs, nehme Zweierkomplement an?" #. TRANSLATORS: Second %s is a type name (gid_t,uid_t,etc.) #: src/list.c:778 #, c-format msgid "Archive octal value %.*s is out of %s range" msgstr "Oktalzahl %.*s außerhalb des %s-Bereichs" #: src/list.c:799 msgid "Archive contains obsolescent base-64 headers" msgstr "Archiv enthält veraltete Base64-Kopfteile" #: src/list.c:813 #, c-format msgid "Archive signed base-64 string %s is out of %s range" msgstr "Base64-Text %s außerhalb des %s-Bereichs." #: src/list.c:844 #, c-format msgid "Archive base-256 value is out of %s range" msgstr "Base-256-Wert ist außerhalb des %s-Bereichs." #. TRANSLATORS: Second %s is a type name (gid_t,uid_t,etc.) #: src/list.c:873 #, c-format msgid "Archive contains %.*s where numeric %s value expected" msgstr "Archiv enthält „%.*s“ wo numerische %s-Werte stehen sollten." #. TRANSLATORS: Second %s is type name (gid_t,uid_t,etc.) #: src/list.c:895 #, c-format msgid "Archive value %s is out of %s range %s..%s" msgstr "Wert %s außerhalb des %s-Bereichs %s..%s." #: src/list.c:1261 #, c-format msgid " link to %s\n" msgstr " Verknüpfung zu %s\n" #: src/list.c:1269 #, c-format msgid " unknown file type %s\n" msgstr " unbekannter Dateityp %s\n" #: src/list.c:1287 #, c-format msgid "--Long Link--\n" msgstr "––Lange Verknüpfung––\n" #: src/list.c:1291 #, c-format msgid "--Long Name--\n" msgstr "––Langer Name––\n" # Alte Üs: Band Kopfteil. Kann diese Meldung auch bei Disketten # ausgegeben werden? Dann kann man ja nicht "Band" sagen; am besten # einfach "Volume" lassen. ke. #: src/list.c:1295 #, c-format msgid "--Volume Header--\n" msgstr "––Vorspann des Teils––\n" #: src/list.c:1303 #, c-format msgid "--Continued at byte %s--\n" msgstr "––Fortgesetzt bei Byte %s––\n" #: src/list.c:1365 msgid "Creating directory:" msgstr "Erzeuge Verzeichnis:" #: src/misc.c:298 msgid "Cannot get working directory" msgstr "Kann Arbeitsverzeichnis nicht ermitteln." #: src/misc.c:571 #, c-format msgid "Renaming %s to %s\n" msgstr "Benenne „%s“ in „%s“ um.\n" #: src/misc.c:580 src/misc.c:599 #, c-format msgid "%s: Cannot rename to %s" msgstr "%s: Kann nicht in %s umbenennen" #: src/misc.c:604 #, c-format msgid "Renaming %s back to %s\n" msgstr "Benenne „%s“ zurück in „%s“.\n" #: src/misc.c:851 #, c-format msgid "%s: File removed before we read it" msgstr "%s: Datei gelöscht, bevor sie gelesen wurde." #: src/misc.c:866 #, c-format msgid "%s: Directory removed before we read it" msgstr "%s: Verzeichnis gelöscht, bevor es gelesen wurde." #: src/misc.c:887 msgid "child process" msgstr "Kindprozess" #: src/misc.c:896 msgid "interprocess channel" msgstr "Interprocess-Kanal" #: src/names.c:594 msgid "Pattern matching characters used in file names" msgstr "Zeichen für Musterüberdeckung im Dateinamen benutzt" #: src/names.c:596 msgid "Use --wildcards to enable pattern matching, or --no-wildcards to suppress this warning" msgstr "" "Benutzen Sie --wildcards, um Musterüberdeckung zu ermöglichen oder\n" "--no-wildcards, um diese Warnung zu unterdrücken." #: src/names.c:614 src/names.c:630 #, c-format msgid "%s: Not found in archive" msgstr "%s: Nicht im Archiv gefunden." #: src/names.c:615 #, c-format msgid "%s: Required occurrence not found in archive" msgstr "%s: Erforderliches Auftreten nicht im Archiv gefunden." #: src/names.c:649 #, c-format msgid "Archive label mismatch" msgstr "Kennzeichnung des Archivs passt nicht" #: src/names.c:953 msgid "Using -C option inside file list is not allowed with --listed-incremental" msgstr "Option -C in Dateiliste ist nicht erlaubt mit --listed-incremental" #: src/names.c:959 msgid "Only one -C option is allowed with --listed-incremental" msgstr "In --listed-incremental ist nur eine Option -C erlaubt" #: src/tar.c:81 #, c-format msgid "Options `-%s' and `-%s' both want standard input" msgstr "Die beiden Optionen „-%s“ und „-%s“ verlangen Standard-Eingabe." #: src/tar.c:158 #, c-format msgid "%s: Invalid archive format" msgstr "%s: Ungültiges Archivformat" #: src/tar.c:182 msgid "GNU features wanted on incompatible archive format" msgstr "GNU-Erweiterungen bei einem inkompatiblen Archiv-Format verlangt." #: src/tar.c:250 #, c-format msgid "Unknown quoting style `%s'. Try `%s --quoting-style=help' to get a list." msgstr "Unbekannter Zitatstil „%s“. Versuchen Sie „%s --quoting-style=help“ für eine Liste." #: src/tar.c:348 msgid "" "GNU `tar' saves many files together into a single tape or disk archive, and can restore individual files from the archive.\n" "\n" "Examples:\n" " tar -cf archive.tar foo bar # Create archive.tar from files foo and bar.\n" " tar -tvf archive.tar # List all files in archive.tar verbosely.\n" " tar -xf archive.tar # Extract all files from archive.tar.\n" msgstr "" "GNU „tar“ fasst viele Dateien in einem einzigen Archiv auf Platte oder Band zusammen und kann einzelne Dateien aus dem Archiv wieder herstellen.\n" "\n" "Beispiele:\n" " tar -cf archiv.tar foo bar # archiv.tar mit den Dateien foo und bar erzeugen\n" " tar -tvf archiv.tar # Inhalt von archiv.tar ausführlich anzeigen\n" " tar -xf archiv.tar # alle Dateien aus archiv.tar extrahieren\n" #: src/tar.c:357 msgid "" "The backup suffix is `~', unless set with --suffix or SIMPLE_BACKUP_SUFFIX.\n" "The version control may be set with --backup or VERSION_CONTROL, values are:\n" "\n" " none, off never make backups\n" " t, numbered make numbered backups\n" " nil, existing numbered if numbered backups exist, simple otherwise\n" " never, simple always make simple backups\n" msgstr "" "Die Namenserweiterung für Sicherheitskopien ist „~“, wenn nicht mit --suffix\n" "oder der Umgebungsvariablen SIMPLE_BACKUP_SUFFIX etwas anderes eingestellt ist.\n" "Die Versionskontrolle kann mit --backup oder der Umgebungsvariablen\n" "VERSION_CONTROL gesetzt werden. Mögliche Werte sind:\n" "\n" " none, off niemals Sicherheitskopien anlegen\n" " t, numbered nummerierte Sicherheitskopien\n" " nil, existing nummerierte Sicherheitskopien, wenn schon nummerierte\n" " vorhanden sind, sonst einfache\n" " never, simple immer einfache Sicherheitskopien\n" #: src/tar.c:387 msgid "Main operation mode:" msgstr "Hauptsächlicher Arbeitsmodus:" #: src/tar.c:390 msgid "list the contents of an archive" msgstr "den Inhalt eines Archivs auflisten" #: src/tar.c:392 msgid "extract files from an archive" msgstr "Dateien aus einem Archiv extrahieren" #: src/tar.c:395 msgid "create a new archive" msgstr "ein neues Archiv anlegen" #: src/tar.c:397 msgid "find differences between archive and file system" msgstr "Unterschiede zwischen Archiv und Dateisystem suchen" #: src/tar.c:400 msgid "append files to the end of an archive" msgstr "Dateien hinten an das Archiv anfügen" #: src/tar.c:402 msgid "only append files newer than copy in archive" msgstr "nur Dateien anfügen, die neuer als die Kopie im Archiv sind" #: src/tar.c:404 msgid "append tar files to an archive" msgstr "tar-Dateien an ein Archiv anfügen" #: src/tar.c:407 msgid "delete from the archive (not on mag tapes!)" msgstr "aus dem Archiv löschen (nicht auf Magnetband!)" #: src/tar.c:409 msgid "test the archive volume label and exit" msgstr "den Archiv-Teil-Namen überprüfen und beenden" #: src/tar.c:414 msgid "Operation modifiers:" msgstr "Feineinstellungen:" #: src/tar.c:417 msgid "handle sparse files efficiently" msgstr "löchrige Dateien („sparse files“) effizient behandeln" #: src/tar.c:418 msgid "MAJOR[.MINOR]" msgstr "MAJOR[.MINOR]" #: src/tar.c:419 msgid "set version of the sparse format to use (implies --sparse)" msgstr "zu benutzende Version des Sparse-Formats setzen (impliziert --sparse)" #: src/tar.c:421 msgid "handle old GNU-format incremental backup" msgstr "inkrementelle Sicherung im alten GNU-Format" #: src/tar.c:423 msgid "handle new GNU-format incremental backup" msgstr "inkrementelle Sicherung im neuen GNU-Format" #: src/tar.c:425 msgid "dump level for created listed-incremental archive" msgstr "Niveau für erzeugte Archive mit --listed-incremental ausgeben" #: src/tar.c:427 msgid "do not exit with nonzero on unreadable files" msgstr "kein Abbruch mit Existatus!=0 bei unlesbaren Dateien" #: src/tar.c:429 msgid "process only the NUMBERth occurrence of each file in the archive; this option is valid only in conjunction with one of the subcommands --delete, --diff, --extract or --list and when a list of files is given either on the command line or via the -T option; NUMBER defaults to 1" msgstr "nur das ZAHLte Auftreten jeder Datei im Archiv bearbeiten; diese Option kann nur zusammen mit einem der Arbeitsmodi --delete, --diff, --extract oder --list und wenn eine Dateiliste entweder auf der Kommandozeile oder mittels der Option -T angegeben wurde benutzt werden; Zahl ist standardmäßig 1" #: src/tar.c:435 msgid "archive is seekable" msgstr "im Archiv kann positioniert werden" #: src/tar.c:437 msgid "archive is not seekable" msgstr "im Archiv kann nicht positioniert werden" #: src/tar.c:439 msgid "do not check device numbers when creating incremental archives" msgstr "Gerätenummer bei Erstellung inkrementeller Archive nicht prüfen" #: src/tar.c:442 msgid "check device numbers when creating incremental archives (default)" msgstr "Gerätenummer bei Erstellung inkrementeller Archive prüfen (Voreinstellung)" #: src/tar.c:448 msgid "Overwrite control:" msgstr "Steuerung des Überschreibens:" #: src/tar.c:451 msgid "attempt to verify the archive after writing it" msgstr "Archiv nach dem Schreiben prüfen" #: src/tar.c:453 msgid "remove files after adding them to the archive" msgstr "Dateien nach dem Hinzufügen zum Archiv löschen" #: src/tar.c:455 msgid "don't replace existing files when extracting" msgstr "vorhandene Dateien beim Extrahieren nicht überschreiben" #: src/tar.c:457 msgid "don't replace existing files that are newer than their archive copies" msgstr "vorhandene Dateien, die neuer als die Archivkopie sind, nicht überschreiben" #: src/tar.c:459 msgid "overwrite existing files when extracting" msgstr "vorhandene Dateien beim Extrahieren überschreiben" #: src/tar.c:461 msgid "remove each file prior to extracting over it" msgstr "zu überschreibende Dateien vor dem Extrahieren löschen" #: src/tar.c:463 msgid "empty hierarchies prior to extracting directory" msgstr "Verzeichnishierarchien rekursiv vor dem Extrahieren eines Verzeichnisses löschen" #: src/tar.c:465 msgid "preserve metadata of existing directories" msgstr "Metadaten existierender Verzeichnisse erhalten" #: src/tar.c:467 msgid "overwrite metadata of existing directories when extracting (default)" msgstr "Metadaten existierender Verzeichnisse beim Extrahieren überschreiben (Voreinstellung)" #: src/tar.c:473 msgid "Select output stream:" msgstr "Wahl des Ausgabestroms:" #: src/tar.c:476 msgid "extract files to standard output" msgstr "Dateien auf die Standardausgabe extrahieren" #: src/tar.c:477 src/tar.c:536 src/tar.c:538 tests/genfile.c:190 msgid "COMMAND" msgstr "BEFEHL" #: src/tar.c:478 msgid "pipe extracted files to another program" msgstr "extrahierte Dateien an ein anderes Programm weiterreichen" #: src/tar.c:480 msgid "ignore exit codes of children" msgstr "Exitstatus der Kinder ignorieren" #: src/tar.c:482 msgid "treat non-zero exit codes of children as error" msgstr "Exitstatus!=0 von Kindern als Fehler ansehen" #: src/tar.c:487 msgid "Handling of file attributes:" msgstr "Behandlung der Datei-Attribute:" #: src/tar.c:490 msgid "force NAME as owner for added files" msgstr "Eigentümer für hinzugefügte Dateien auf NAME setzen" #: src/tar.c:492 msgid "force NAME as group for added files" msgstr "Gruppe für hinzugefügte Dateien auf NAME setzen" #: src/tar.c:493 src/tar.c:690 msgid "DATE-OR-FILE" msgstr "DATUM-ODER-DATEI" #: src/tar.c:494 msgid "set mtime for added files from DATE-OR-FILE" msgstr "Änderungszeit für hinzugefügte Datei aus DATUM-ODER-DATEI beziehen" #: src/tar.c:495 msgid "CHANGES" msgstr "ÄNDERUNGEN" #: src/tar.c:496 msgid "force (symbolic) mode CHANGES for added files" msgstr "den (symbolischen) Modus ÄNDERUNGEN für hinzugefügte Dateien erzwingen" #: src/tar.c:498 msgid "METHOD" msgstr "METHODE" #: src/tar.c:499 msgid "preserve access times on dumped files, either by restoring the times after reading (METHOD='replace'; default) or by not setting the times in the first place (METHOD='system')" msgstr "Zugriffszeit für abgespeicherte Dateien erhalten, entweder durch Zurücksetzen der Zeiten nach dem Lesen (METHODE=„replace“, Voreinstellung) oder dadurch, dass die Zeiten gar nicht erst neu gesetzt werden (METHODE=„system“)" #: src/tar.c:503 msgid "don't extract file modified time" msgstr "die geänderte Zeit nicht extrahieren" #: src/tar.c:505 msgid "try extracting files with the same ownership as exists in the archive (default for superuser)" msgstr "versuchen, die Dateien mit denselben Eigentumsverhältnisse zu extrahieren (für den Admin ist dies die Voreinstellung)" #: src/tar.c:507 msgid "extract files as yourself (default for ordinary users)" msgstr "Dateien als aktueller Nutzer extrahieren (für normale Nutzer die Voreinstellung)" #: src/tar.c:509 msgid "always use numbers for user/group names" msgstr "immer Zahlen für Nutzer-/Gruppennamen verwenden" #: src/tar.c:511 msgid "extract information about file permissions (default for superuser)" msgstr "Informationen über Dateizugriffsrechte mit extrahieren (Voreinstellung für Root)" #: src/tar.c:515 msgid "apply the user's umask when extracting permissions from the archive (default for ordinary users)" msgstr "die Umask des Nutzers anwenden beim Extrahieren von Dateizugriffsrechte aus dem Archiv (Voreinstellung für normale Nutzer)" #: src/tar.c:517 msgid "sort names to extract to match archive" msgstr "zu entpackende Dateinamen wie im Archiv sortieren" #: src/tar.c:520 msgid "same as both -p and -s" msgstr "wie -p und -s zusammen" #: src/tar.c:522 msgid "delay setting modification times and permissions of extracted directories until the end of extraction" msgstr "das Setzen von Zugriffszeiten und Rechten von extrahierten Verzeichnissen verschieben bis zum Ende des Entpackens" #: src/tar.c:525 msgid "cancel the effect of --delay-directory-restore option" msgstr "den Effekt von --delay-directory-restore aufheben" #: src/tar.c:530 msgid "Device selection and switching:" msgstr "Geräteauswahl und -umschaltung:" #: src/tar.c:532 msgid "ARCHIVE" msgstr "ARCHIV" #: src/tar.c:533 msgid "use archive file or device ARCHIVE" msgstr "Archivdatei oder Gerät ARCHIV benutzen" #: src/tar.c:535 msgid "archive file is local even if it has a colon" msgstr "Archivdatei ist lokal, auch wenn der Name einen Doppelpunkt enthält" #: src/tar.c:537 msgid "use given rmt COMMAND instead of rmt" msgstr "statt „rmt“ den gegebenen BEFEHL benutzen" #: src/tar.c:539 msgid "use remote COMMAND instead of rsh" msgstr "statt „rsh“ den entfernten BEFEHL benutzen" #: src/tar.c:543 msgid "specify drive and density" msgstr "Laufwerk und Schreibdichte angeben" #: src/tar.c:557 msgid "create/list/extract multi-volume archive" msgstr "mehrteiliges Archiv anlegen/listen/extrahieren" #: src/tar.c:559 msgid "change tape after writing NUMBER x 1024 bytes" msgstr "Medium wechseln, wenn ZAHL × 1024 Bytes geschrieben wurden" #: src/tar.c:561 msgid "run script at end of each tape (implies -M)" msgstr "am Ende jedes Mediums das Skript ausführen (impliziert -M)" #: src/tar.c:564 msgid "use/update the volume number in FILE" msgstr "Teil-Nummer in DATEI benutzen/aktualisieren" #: src/tar.c:569 msgid "Device blocking:" msgstr "Blockung des Gerätes:" #: src/tar.c:571 msgid "BLOCKS" msgstr "BLÖCKE" #: src/tar.c:572 msgid "BLOCKS x 512 bytes per record" msgstr "BLÖCKE × 512 Bytes pro Record" #: src/tar.c:574 msgid "NUMBER of bytes per record, multiple of 512" msgstr "ZAHL Bytes pro Record, Vielfaches von 512" #: src/tar.c:576 msgid "ignore zeroed blocks in archive (means EOF)" msgstr "Blöcke mit Nullen im Archiv ignorieren (heißt EOF)" #: src/tar.c:578 msgid "reblock as we read (for 4.2BSD pipes)" msgstr "erneut Blocken beim Lesen (für 4.2BSD‐Pipes)" #: src/tar.c:583 msgid "Archive format selection:" msgstr "Auswahl des Archiv-Formats:" #: src/tar.c:585 tests/genfile.c:153 msgid "FORMAT" msgstr "FORMAT" #: src/tar.c:586 msgid "create archive of the given format" msgstr "Archiv mit dem gegebenen Format anlegen" #: src/tar.c:588 msgid "FORMAT is one of the following:" msgstr "FORMAT ist eines der folgenden:" #: src/tar.c:589 msgid "old V7 tar format" msgstr "altes V7-tar-Format" #: src/tar.c:592 msgid "GNU format as per tar <= 1.12" msgstr "GNU-Format wie mit tar <=1.12" #: src/tar.c:594 msgid "GNU tar 1.13.x format" msgstr "GNU-tar-1.13.x-Format" #: src/tar.c:596 msgid "POSIX 1003.1-1988 (ustar) format" msgstr "Format von POSIX 1003.1-1988 (ustar)" #: src/tar.c:598 msgid "POSIX 1003.1-2001 (pax) format" msgstr "Format von POSIX 1003.1-2001 (pax)" #: src/tar.c:599 msgid "same as pax" msgstr "wie pax" #: src/tar.c:602 msgid "same as --format=v7" msgstr "wie --format=v7" #: src/tar.c:605 msgid "same as --format=posix" msgstr "wie --format=posix" #: src/tar.c:606 msgid "keyword[[:]=value][,keyword[[:]=value]]..." msgstr "Schlüsselwort[[:]=Wert][,Schlüsselwort[[:]=Wert]]..." #: src/tar.c:607 msgid "control pax keywords" msgstr "Pax-Schlüsselwörter steuern" #: src/tar.c:608 msgid "TEXT" msgstr "TEXT" #: src/tar.c:609 msgid "create archive with volume name TEXT; at list/extract time, use TEXT as a globbing pattern for volume name" msgstr "Archiv mit dem Teilnamen TEXT anlegen; beim Listen/Extrahieren, TEXT als Muster für den Teilnamen benutzen" #: src/tar.c:614 msgid "Compression options:" msgstr "Kompressionsoptionen:" #: src/tar.c:616 msgid "use archive suffix to determine the compression program" msgstr "Archiverweiterung nehmen, um Kompressionsprogramm zu bestimmen" #: src/tar.c:618 msgid "do not use archive suffix to determine the compression program" msgstr "Archiverweiterung nicht nehmen, um Kompressionsprogramm zu bestimmen" #: src/tar.c:620 msgid "PROG" msgstr "PROG" #: src/tar.c:621 msgid "filter through PROG (must accept -d)" msgstr "durch PROG filten (muss -d akzeptieren)" #: src/tar.c:637 msgid "Local file selection:" msgstr "Auswahl der lokalen Dateien:" #: src/tar.c:640 msgid "add given FILE to the archive (useful if its name starts with a dash)" msgstr "angegebene Datei zum Archiv hinzufügen (nützlich, wenn Datei mit einem Strich beginnt)" #: src/tar.c:641 msgid "DIR" msgstr "VERZEICHNIS" #: src/tar.c:642 msgid "change to directory DIR" msgstr "zu VERZEICHNIS wechseln" #: src/tar.c:644 msgid "get names to extract or create from FILE" msgstr "Namen der zu bearbeitenden Dateien aus DATEI lesen" #: src/tar.c:646 msgid "-T reads null-terminated names, disable -C" msgstr "-T liest null-terminierte Namen, verbiete -C" #: src/tar.c:648 msgid "disable the effect of the previous --null option" msgstr "die Wirkung der vorangehenden Option --null aufheben" #: src/tar.c:650 msgid "unquote filenames read with -T (default)" msgstr "Dateinamen, die mit -T gelesen werden, von Zitat befreien (Voreinstellung)" #: src/tar.c:652 msgid "do not unquote filenames read with -T" msgstr "Dateinamen, die mit -T gelesen werden, nicht von Zitat befreien" #: src/tar.c:653 tests/genfile.c:136 msgid "PATTERN" msgstr "MUSTER" #: src/tar.c:654 msgid "exclude files, given as a PATTERN" msgstr "Dateien auslassen, auf die MUSTER passt" #: src/tar.c:656 msgid "exclude patterns listed in FILE" msgstr "Dateien auslassen, auf die in DATEI angegebene Muster passen" #: src/tar.c:658 msgid "exclude contents of directories containing CACHEDIR.TAG, except for the tag file itself" msgstr "Inhalt von Verzeichnissen auslassen, die CACHEDIR.TAG enthalten, außer der Markierungsdatei selbst" #: src/tar.c:661 msgid "exclude everything under directories containing CACHEDIR.TAG" msgstr "alles unterhalb von Verzeichnissen auslassen, die CACHEDIR.TAG enthalten" #: src/tar.c:664 msgid "exclude directories containing CACHEDIR.TAG" msgstr "Verzeichnisse auslassen, die CACHEDIR.TAG enthalten" #: src/tar.c:666 msgid "exclude contents of directories containing FILE, except for FILE itself" msgstr "Inhalt von Verzeichnissen auslassen, die DATEI enthalten, außer DATEI selbst" #: src/tar.c:669 msgid "exclude everything under directories containing FILE" msgstr "alles unterhalb von Verzeichnissen auslassen, die DATEI enthalten" #: src/tar.c:671 msgid "exclude directories containing FILE" msgstr "Verzeichnisse auslassen, die DATEI enthalten" #: src/tar.c:673 msgid "exclude version control system directories" msgstr "Verzeichnisse von Versionskontrollsystemen auslassen" #: src/tar.c:675 msgid "exclude backup and lock files" msgstr "Backup- und Lock-Dateien ausschließen" #: src/tar.c:677 msgid "avoid descending automatically in directories" msgstr "automatischen Abstieg in Vezeichnisse vermeiden" #: src/tar.c:679 msgid "stay in local file system when creating archive" msgstr "beim Anlegen eines Archivs im lokalen Dateisystem bleiben" #: src/tar.c:681 msgid "recurse into directories (default)" msgstr "in Verzeichnisse absteigen (Voreinstellung)" #: src/tar.c:683 msgid "don't strip leading `/'s from file names" msgstr "führende „/“-Zeichen in den Dateinamen erhalten" #: src/tar.c:685 msgid "follow symlinks; archive and dump the files they point to" msgstr "symbolischen Verknüpfungen folgen; die Dateien archivieren und abspeichern, auf die sie zeigen" #: src/tar.c:687 msgid "follow hard links; archive and dump the files they refer to" msgstr "harten Verknüpfungen folgen; die Dateien archivieren und abspeichern, auf die sie sich beziehen" #: src/tar.c:688 msgid "MEMBER-NAME" msgstr "ELEMENT-NAME" #: src/tar.c:689 msgid "begin at member MEMBER-NAME in the archive" msgstr "mit ELEMENT-NAME im Archiv beginnen" #: src/tar.c:691 msgid "only store files newer than DATE-OR-FILE" msgstr "nur Dateien ablegen, die neuer als DATUM-ODER-DATEI sind" #: src/tar.c:693 msgid "DATE" msgstr "DATUM" #: src/tar.c:694 msgid "compare date and time when data changed only" msgstr "Datum und Zeit nur überprüfen, wenn Daten geändert wurden" #: src/tar.c:695 msgid "CONTROL" msgstr "KONTROLLE" #: src/tar.c:696 msgid "backup before removal, choose version CONTROL" msgstr "Sicherung vor dem Entfernen, wähle Versions-KONTROLLE" #: src/tar.c:697 src/tar.c:776 src/tar.c:778 tests/genfile.c:169 msgid "STRING" msgstr "ZEICHENKETTE" #: src/tar.c:698 msgid "backup before removal, override usual suffix ('~' unless overridden by environment variable SIMPLE_BACKUP_SUFFIX)" msgstr "Sicherung vor dem Entfernen, übliches Suffix ersetzen („~“, wenn nicht durch Umgebungsvariable SIMPLE_BACKUP_SUFFIX anders gesetzt)" #: src/tar.c:703 msgid "File name transformations:" msgstr "Dateinamentransformationen:" #: src/tar.c:705 msgid "strip NUMBER leading components from file names on extraction" msgstr "ZAHL führende Komponenten beim Extrahieren von Dateinamen entfernen" #: src/tar.c:707 msgid "EXPRESSION" msgstr "AUSDRUCK" #: src/tar.c:708 msgid "use sed replace EXPRESSION to transform file names" msgstr "den sed-AUSDRUCK zur Dateinamentransformation benutzen" #: src/tar.c:714 msgid "File name matching options (affect both exclude and include patterns):" msgstr "Dateinamenauswahloptionen (sowohl für ein- als auch ausschließende Muster):" #: src/tar.c:717 msgid "ignore case" msgstr "Groß-/Kleinschreibung ignorieren" #: src/tar.c:719 msgid "patterns match file name start" msgstr "Muster am Dateinamensanfang ausrichten" #: src/tar.c:721 msgid "patterns match after any `/' (default for exclusion)" msgstr "Muster passen nach jedem „/“ (Voreinstellung beim Ausschluss)" #: src/tar.c:723 msgid "case sensitive matching (default)" msgstr "Groß-/Kleinschreibung beachten (Voreinstellung)" #: src/tar.c:725 msgid "use wildcards (default for exclusion)" msgstr "Muster benutzen (Voreinstellung für Ausschluss)" #: src/tar.c:727 msgid "verbatim string matching" msgstr "Zeichenketten sind buchstabengetreu" #: src/tar.c:729 msgid "wildcards do not match `/'" msgstr "Jokerzeichen passen nicht auf „/“" #: src/tar.c:731 msgid "wildcards match `/' (default for exclusion)" msgstr "Jokerzeichen passen auf „/“ (Voreinstellung für Ausschluss)" #: src/tar.c:736 msgid "Informative output:" msgstr "Informationen:" #: src/tar.c:739 msgid "verbosely list files processed" msgstr "bearbeitete Dateien ausführlich listen" #: src/tar.c:740 msgid "KEYWORD" msgstr "SCHLÜSSELWORT" #: src/tar.c:741 msgid "warning control" msgstr "Warnungssteuerung" #: src/tar.c:743 msgid "display progress messages every NUMBERth record (default 10)" msgstr "Fortschrittsnachrichten bei jedem ZAHLten Record (Voreinstellung 10) anzeigen" #: src/tar.c:745 msgid "ACTION" msgstr "AKTION" #: src/tar.c:746 msgid "execute ACTION on each checkpoint" msgstr "AKTION bei jedem Kontrollpunkt ausführen" #: src/tar.c:749 msgid "print a message if not all links are dumped" msgstr "eine Nachricht ausgeben, wenn nicht alle Verknüpfungen abgespeichert werden" #: src/tar.c:750 msgid "SIGNAL" msgstr "SIGNAL" #: src/tar.c:751 msgid "print total bytes after processing the archive; with an argument - print total bytes when this SIGNAL is delivered; Allowed signals are: SIGHUP, SIGQUIT, SIGINT, SIGUSR1 and SIGUSR2; the names without SIG prefix are also accepted" msgstr "Gesamtzahl der Bytes nach dem Bearbeiten des Archivs anzeigen; mit einem Argument – Gesamtzahl der Bytes anzeigen, wenn dieses SIGNAL ausgeliefert wird; erlaubte Signale sind: SIGHUP, SIGQUIT, SIGINT, SIGUSR1 und SIGUSR2; die Namen ohne das Präfix SIG sind auch erlaubt" #: src/tar.c:756 msgid "print file modification times in UTC" msgstr "Dateiänderungszeiten in UTC anzeigen" #: src/tar.c:758 msgid "print file time to its full resolution" msgstr "Dateizeit in voller Auflösung anzeigen" #: src/tar.c:760 msgid "send verbose output to FILE" msgstr "ausführliche Ausgabe in DATEI schreiben" #: src/tar.c:762 msgid "show block number within archive with each message" msgstr "bei jeder Nachricht die Blocknummer innerhalb des Archivs mit anzeigen" #: src/tar.c:764 msgid "ask for confirmation for every action" msgstr "für jede Aktion um Bestätigung bitten" #: src/tar.c:767 msgid "show tar defaults" msgstr "Voreinstellungen von tar anzeigen" #: src/tar.c:769 msgid "when listing or extracting, list each directory that does not match search criteria" msgstr "beim Listen oder Extrahieren jedes Verzeichnis auflisten, dass nicht den Suchkriterien entspricht" #: src/tar.c:771 msgid "show file or archive names after transformation" msgstr "Datei- oder Archivnamen nach der Transformation anzeigen" #: src/tar.c:774 msgid "STYLE" msgstr "STIL" #: src/tar.c:775 msgid "set name quoting style; see below for valid STYLE values" msgstr "Zitatstil setzen; siehe unten für gültige STIL-Werte" #: src/tar.c:777 msgid "additionally quote characters from STRING" msgstr "zusätzliche Zeichen aus ZEICHENKETTE zitieren" #: src/tar.c:779 msgid "disable quoting for characters from STRING" msgstr "Zeichen aus ZEICHENKETTE nicht zitieren" #: src/tar.c:784 msgid "Compatibility options:" msgstr "Kompatibilitätsoptionen:" #: src/tar.c:787 msgid "when creating, same as --old-archive; when extracting, same as --no-same-owner" msgstr "beim Anlegen wie --old-archive; beim Extrahieren wie --no-same-owner" #: src/tar.c:792 msgid "Other options:" msgstr "Weitere Optionen:" #: src/tar.c:795 msgid "disable use of some potentially harmful options" msgstr "möglicherweise schädliche Optionen deaktivieren" #: src/tar.c:930 msgid "You may not specify more than one `-Acdtrux' or `--test-label' option" msgstr "Von den Optionen „-Acdtrux“ oder „--test-label“ ist jeweils nur eine erlaubt" #: src/tar.c:940 msgid "Conflicting compression options" msgstr "Kompressionsoptionen schließen sich gegenseitig aus." #: src/tar.c:996 #, c-format msgid "Unknown signal name: %s" msgstr "Unbekannter Signalname: %s" #: src/tar.c:1020 msgid "Date sample file not found" msgstr "Datumsdatei nicht gefunden" #: src/tar.c:1028 #, c-format msgid "Substituting %s for unknown date format %s" msgstr "Ersetze %s für unbekanntes Datumsformat %s" #: src/tar.c:1057 #, c-format msgid "Option %s: Treating date `%s' as %s" msgstr "Option %s: Behandle Datum „%s“ als %s" #: src/tar.c:1135 #, c-format msgid "%s: file list already read" msgstr "%s: Dateiliste schon gelesen" #: src/tar.c:1201 #, c-format msgid "%s: file name read contains nul character" msgstr "%s: gelesener Dateiname enthält ein NULL-Zeichen" #: src/tar.c:1268 src/tar.c:1272 src/tar.c:1276 src/tar.c:1280 src/tar.c:1284 #: src/tar.c:1288 #, c-format msgid "filter the archive through %s" msgstr "Archiv durch %s filtern" #: src/tar.c:1296 msgid "Valid arguments for the --quoting-style option are:" msgstr "Gültige Argumente für die Option --quoting-style sind:" #: src/tar.c:1300 msgid "" "\n" "*This* tar defaults to:\n" msgstr "" "\n" "*Dieses* „tar“ hat als Voreinstellung:\n" #: src/tar.c:1402 msgid "Invalid blocking factor" msgstr "Ungültige Blockgröße" #: src/tar.c:1515 msgid "Invalid tape length" msgstr "Ungültige Bandlänge" #: src/tar.c:1529 msgid "Invalid incremental level value" msgstr "unzulässiger Wert für inkrementelles Niveau" #: src/tar.c:1575 msgid "More than one threshold date" msgstr "Mehr als ein Datum angegeben." #: src/tar.c:1630 src/tar.c:1633 msgid "Invalid sparse version value" msgstr "Ungültiger Wert für Sparse-Version (für löchrige Dateien)" #: src/tar.c:1718 msgid "--atime-preserve='system' is not supported on this platform" msgstr "--atime-preserve='system' wird auf dieser Plattform nicht unterstützt" #: src/tar.c:1743 msgid "--checkpoint value is not an integer" msgstr "Wert für --checkpoint ist keine ganze Zahl" #: src/tar.c:1848 msgid "Invalid group" msgstr "Ungültige Gruppe" #: src/tar.c:1855 msgid "Invalid mode given on option" msgstr "Ungültige Zugriffsrechte angegeben." #: src/tar.c:1912 msgid "Invalid number" msgstr "Ungültige Zahl" #: src/tar.c:1934 msgid "Invalid owner" msgstr "Ungültiger Benutzer" #: src/tar.c:1964 msgid "The --preserve option is deprecated, use --preserve-permissions --preserve-order instead" msgstr "Die Option --preserve ist veraltet, benutzen Sie stattdessen --preserve-permissions --preserve-order" #: src/tar.c:1975 msgid "Invalid record size" msgstr "Ungültiger Wert für Recordgröße." #: src/tar.c:1978 #, c-format msgid "Record size must be a multiple of %d." msgstr "Die Recordgröße muss ein Vielfaches von %d sein." #: src/tar.c:2019 msgid "Invalid number of elements" msgstr "Ungültige Elementanzahl" #: src/tar.c:2039 msgid "Only one --to-command option allowed" msgstr "Nur eine Option --to-command erlaubt" #: src/tar.c:2119 #, c-format msgid "Malformed density argument: %s" msgstr "Fehlgeformtes Dichteargument: %s" #: src/tar.c:2145 #, c-format msgid "Unknown density: `%c'" msgstr "Unbekannte Dicht: „%c“" #: src/tar.c:2162 #, c-format msgid "Options `-[0-7][lmh]' not supported by *this* tar" msgstr "Die Optionen „-[0-7][lmh]“ unterstützt *dieses* „tar“ nicht." #: src/tar.c:2175 msgid "[FILE]..." msgstr "[DATEI]..." #: src/tar.c:2293 #, c-format msgid "Old option `%c' requires an argument." msgstr "Die alte Option „%c“ benötigt einen Parameter." #: src/tar.c:2374 msgid "--occurrence is meaningless without a file list" msgstr "--occurrence ist ohne Dateiliste bedeutungslos" #: src/tar.c:2380 msgid "--occurrence cannot be used in the requested operation mode" msgstr "--occurrence kann im angeforderten Operationsmodus nicht benutzt werden" #: src/tar.c:2398 msgid "Multiple archive files require `-M' option" msgstr "Mehrere Archivdateien verlangen die Option „-M“." #: src/tar.c:2403 msgid "Cannot combine --listed-incremental with --newer" msgstr "--listed-incremental kann nicht mit --newer benutzt werden" #: src/tar.c:2406 msgid "--level is meaningless without --listed-incremental" msgstr "--level ist ohne --listed-incremental bedeutungslos" #: src/tar.c:2423 #, c-format msgid "%s: Volume label is too long (limit is %lu byte)" msgid_plural "%s: Volume label is too long (limit is %lu bytes)" msgstr[0] "%s: Band-Nummer ist zu lang (Maximum ist ein Byte)." msgstr[1] "%s: Band-Nummer ist zu lang (Maximum ist %lu Bytes)." #: src/tar.c:2436 msgid "Cannot verify multi-volume archives" msgstr "Kann mehrteilige Archive nicht prüfen." #: src/tar.c:2438 msgid "Cannot verify compressed archives" msgstr "Kann komprimierte Archive nicht prüfen" #: src/tar.c:2444 msgid "Cannot use multi-volume compressed archives" msgstr "Kann keine mehrteiligen komprimierten Archive verwenden." #: src/tar.c:2450 msgid "Cannot concatenate compressed archives" msgstr "Kann komprimierte Archive nicht aneinanderhängen" #: src/tar.c:2462 msgid "--pax-option can be used only on POSIX archives" msgstr "--pax-option kann nur mit POSIX-Archiven benutzt werden" #: src/tar.c:2492 msgid "Volume length cannot be less than record size" msgstr "Teillänge kann nicht unter der Recordgröße liegen" #: src/tar.c:2495 msgid "--preserve-order is not compatible with --listed-incremental" msgstr "--preserve-order ist nicht kompatibel mit --listed-incremental" #: src/tar.c:2506 msgid "Cowardly refusing to create an empty archive" msgstr "Anlegen eines leeren Archivs wird feige verweigert." #: src/tar.c:2532 msgid "Options `-Aru' are incompatible with `-f -'" msgstr "Die Optionen „-Aru“ sind nicht kompatibel mit „-f -“." #: src/tar.c:2621 msgid "You must specify one of the `-Acdtrux' or `--test-label' options" msgstr "Eine der Optionen „-Acdtrux“ oder „--test-label“ ist notwendig." #: src/tar.c:2675 #, c-format msgid "Exiting with failure status due to previous errors" msgstr "Beende mit Fehlerstatus aufgrund vorheriger Fehler" #: src/update.c:86 #, c-format msgid "%s: File shrank by %s byte" msgid_plural "%s: File shrank by %s bytes" msgstr[0] "%s: Datei ist um ein Byte geschrumpft." msgstr[1] "%s: Datei ist um %s Bytes geschrumpft." #: src/xheader.c:164 #, c-format msgid "Keyword %s is unknown or not yet implemented" msgstr "Schlüsselwort %s ist unbekannt oder noch nicht implementiert" #: src/xheader.c:174 msgid "Time stamp is out of allowed range" msgstr "Zeitstempel außerhalb des zulässigen Bereichs" #: src/xheader.c:205 #, c-format msgid "Pattern %s cannot be used" msgstr "Muster %s kann nicht benutzt werden" #: src/xheader.c:219 #, c-format msgid "Keyword %s cannot be overridden" msgstr "Schlüsselwort %s kann nicht überschrieben werden" #: src/xheader.c:542 msgid "Malformed extended header: missing length" msgstr "Fehlgeformter erweiterter Kopfteil: fehlende Länge" #: src/xheader.c:550 msgid "Extended header length is out of allowed range" msgstr "Länge des erweiterten Kopfteils ist außerhalb des erlaubten Bereichs" #: src/xheader.c:557 #, c-format msgid "Extended header length %*s is out of range" msgstr "Länge %*s des erweiterten Kopfteils ist außerhalb des Bereichs" #: src/xheader.c:569 msgid "Malformed extended header: missing blank after length" msgstr "Fehlgeformter erweiterter Kopfteil: fehlender Leerraum nach der Länge" #: src/xheader.c:577 msgid "Malformed extended header: missing equal sign" msgstr "Fehlgeformter erweiterter Kopfteil: fehlendes Gleichheitszeichen" #: src/xheader.c:583 msgid "Malformed extended header: missing newline" msgstr "Fehlgeformter erweiterter Kopfteil: fehlender Zeilenvorschub" #: src/xheader.c:621 #, c-format msgid "Ignoring unknown extended header keyword `%s'" msgstr "Ignoriere unbekanntes Schlüsselwort „%s“ für erweiterten Kopfteil" #: src/xheader.c:831 #, c-format msgid "Generated keyword/value pair is too long (keyword=%s, length=%s)" msgstr "Generiertes Schlüsselwort/Wert-Paar ist zu lang (Schlüsselwort=%s, Länge =%s)" #. TRANSLATORS: The first %s is the pax extended header keyword #. (atime, gid, etc.). #: src/xheader.c:863 #, c-format msgid "Extended header %s=%s is out of range %s..%s" msgstr "Erweiterter Kopfteil %s=%s ist außerhalb des Bereichs %s..%s." #: src/xheader.c:994 src/xheader.c:1024 src/xheader.c:1338 #, c-format msgid "Malformed extended header: invalid %s=%s" msgstr "Fehlgeformter erweiterter Kopfteil: ungültiges %s=%s" #: src/xheader.c:1291 src/xheader.c:1316 src/xheader.c:1366 #, c-format msgid "Malformed extended header: excess %s=%s" msgstr "Fehlgeformter erweiterter Kopfteil: überzähliges %s=%s" #: src/xheader.c:1379 #, c-format msgid "Malformed extended header: invalid %s: unexpected delimiter %c" msgstr "Fehlgeformter erweiterter Kopfteil: ungültiges %s: unerwarteter Trenner %c" # Ist „odd“ hier ungerade oder merkwürdig? #: src/xheader.c:1389 #, c-format msgid "Malformed extended header: invalid %s: odd number of values" msgstr "Fehlgeformter erweiterter Kopfteil: ungültiges %s: ungewöhnliche Anzahl von Werten" #: src/checkpoint.c:107 #, c-format msgid "%s: not a valid timeout" msgstr "%s: kein gültiger Zeitüberschreitungswert" #: src/checkpoint.c:112 #, c-format msgid "%s: unknown checkpoint action" msgstr "%s: unbekannte Kontrollpunkt-Aktion" #: src/checkpoint.c:132 msgid "write" msgstr "lesen" #: src/checkpoint.c:132 msgid "read" msgstr "schreiben" #. TRANSLATORS: This is a ``checkpoint of write operation'', #. *not* ``Writing a checkpoint''. #. E.g. in Spanish ``Punto de comprobaci@'on de escritura'', #. *not* ``Escribiendo un punto de comprobaci@'on'' #: src/checkpoint.c:222 #, c-format msgid "Write checkpoint %u" msgstr "Schreib-Kontrollpunkt %u" #. TRANSLATORS: This is a ``checkpoint of read operation'', #. *not* ``Reading a checkpoint''. #. E.g. in Spanish ``Punto de comprobaci@'on de lectura'', #. *not* ``Leyendo un punto de comprobaci@'on'' #: src/checkpoint.c:228 #, c-format msgid "Read checkpoint %u" msgstr "Lese-Kontrollpunkt %u" #: tests/genfile.c:111 msgid "" "genfile manipulates data files for GNU paxutils test suite.\n" "OPTIONS are:\n" msgstr "" "genfile manipuliert Datendateien für die Testsuite der GNU paxutils.\n" "OPTIONEN sind:\n" #: tests/genfile.c:127 msgid "File creation options:" msgstr "Optionen beim Anlegen von Dateien:" #: tests/genfile.c:128 tests/genfile.c:139 msgid "SIZE" msgstr "GRÖßE" #: tests/genfile.c:129 msgid "Create file of the given SIZE" msgstr "Datei der gegebenen GRÖßE anlegen" #: tests/genfile.c:131 msgid "Write to file NAME, instead of standard output" msgstr "in Datei NAME anstelle der Standardausgabe schreiben" #: tests/genfile.c:133 msgid "Read file names from FILE" msgstr "Dateinamenlist aus DATEI lesen" #: tests/genfile.c:135 msgid "-T reads null-terminated names" msgstr "-T liest null-terminierte Namen" #: tests/genfile.c:137 msgid "Fill the file with the given PATTERN. PATTERN is 'default' or 'zeros'" msgstr "Die Datei mit dem gegebenen MUSTER füllen. MUSTER ist „default“ oder „zeros“." #: tests/genfile.c:140 msgid "Size of a block for sparse file" msgstr "Größe eines Blocks für löchrige Dateien" # „map“: Karte, Abbildung? #: tests/genfile.c:142 msgid "Generate sparse file. Rest of the command line gives the file map." msgstr "Löchrige („sparse“) Datei erzeugen. Der Rest der Kommandozeile gibt die die Dateibildungsvorschrift an." #: tests/genfile.c:144 msgid "OFFSET" msgstr "POSITION" #: tests/genfile.c:145 msgid "Seek to the given offset before writing data" msgstr "vor dem Schreiben zur gegebenen Position springen" #: tests/genfile.c:151 msgid "File statistics options:" msgstr "Dateistatistikoptionen:" #: tests/genfile.c:154 msgid "Print contents of struct stat for each given file. Default FORMAT is: " msgstr "Inhalt des „struct stat“ für jede gegebene Datei ausgeben. Standard-FORMAT ist:" #: tests/genfile.c:161 msgid "Synchronous execution options:" msgstr "Optionen für synchrone Ausführung:" #: tests/genfile.c:163 msgid "OPTION" msgstr "OPTION" #: tests/genfile.c:164 msgid "Execute ARGS. Useful with --checkpoint and one of --cut, --append, --touch, --unlink" msgstr "ARGUMENTE ausführen. Nützlich mit --checkpoint und einem aus --cut, --append, --touch, --unlink" #: tests/genfile.c:167 msgid "Perform given action (see below) upon reaching checkpoint NUMBER" msgstr "gegebene Aktion (siehe unten) beim Erreichen des Kontrollpunkts ZAHL ausführen" #: tests/genfile.c:170 msgid "Set date for next --touch option" msgstr "Datum für nächste „--touch“-Operation setzen" #: tests/genfile.c:173 msgid "Display executed checkpoints and exit status of COMMAND" msgstr "ausgeführte Kontrollpunkte und Beendigungsstatus von BEFEHL anzeigen" #: tests/genfile.c:178 msgid "Synchronous execution actions. These are executed when checkpoint number given by --checkpoint option is reached." msgstr "Aktionen für synchrone Ausführung. Diese werden beim Erreichen des Kontrollpunkts, der mit der Option --checkpoint gesetzt wurde, ausgeführt." #: tests/genfile.c:181 msgid "Truncate FILE to the size specified by previous --length option (or 0, if it is not given)" msgstr "DATEI kürzen auf die Länge, die mit einer vorhergehenden Option --length (oder 0 bei Abwesenheit) gesetzt wurde" #: tests/genfile.c:185 msgid "Append SIZE bytes to FILE. SIZE is given by previous --length option." msgstr "GRÖßE Bytes an DATEI anfügen. GRÖßE wird mit einer vorhergehenden Option --length gesetzt." #: tests/genfile.c:188 msgid "Update the access and modification times of FILE" msgstr "Zugriffs- und Änderungszeiten der DATEI neu setzen" #: tests/genfile.c:191 msgid "Execute COMMAND" msgstr "BEFEHL ausführen" #: tests/genfile.c:194 msgid "Unlink FILE" msgstr "FILE entfernen (unlink)" #: tests/genfile.c:244 #, c-format msgid "Invalid size: %s" msgstr "Ungültige Größe: %s" #: tests/genfile.c:249 #, c-format msgid "Number out of allowed range: %s" msgstr "Zahl außerhalb des zulässigen Bereichs: %s" #: tests/genfile.c:252 #, c-format msgid "Negative size: %s" msgstr "Negative Größe: %s" #: tests/genfile.c:265 tests/genfile.c:567 #, c-format msgid "stat(%s) failed" msgstr "stat(%s) fehlgeschlagen" #: tests/genfile.c:268 #, c-format msgid "requested file length %lu, actual %lu" msgstr "Dateilänge %lu verlangt, tatsächlich %lu" #: tests/genfile.c:272 #, c-format msgid "created file is not sparse" msgstr "erzeugte Datei ist nicht löchrig" #: tests/genfile.c:361 #, c-format msgid "Error parsing number near `%s'" msgstr "Fehler beim Parser der Zahl in der Nähe von „%s“" #: tests/genfile.c:367 #, c-format msgid "Unknown date format" msgstr "Unbekanntes Datumsformat" #: tests/genfile.c:391 msgid "[ARGS...]" msgstr "[ARGUMENTE...]" #: tests/genfile.c:428 tests/genfile.c:468 tests/genfile.c:521 #: tests/genfile.c:671 tests/genfile.c:685 #, c-format msgid "cannot open `%s'" msgstr "kann „%s“ nicht öffnen" #: tests/genfile.c:434 msgid "cannot seek" msgstr "kann nicht positionieren" #: tests/genfile.c:451 #, c-format msgid "file name contains null character" msgstr "Dateiname enthält Null-Zeichen" #: tests/genfile.c:516 #, c-format msgid "cannot generate sparse files on standard output, use --file option" msgstr "kann auf der Standardausgabe keine löchrige Datei erstellen, benutzen Sie die Option --file" #: tests/genfile.c:594 #, c-format msgid "incorrect mask (near `%s')" msgstr "inkorrekte Maske (nahe „%s“)" #: tests/genfile.c:600 tests/genfile.c:633 #, c-format msgid "Unknown field `%s'" msgstr "unbekannte Feld „%s“" #: tests/genfile.c:660 #, c-format msgid "cannot set time on `%s'" msgstr "kann an „%s“ keine Zeit setzen" #: tests/genfile.c:699 #, c-format msgid "cannot unlink `%s'" msgstr "kann „%s“ nicht entfernen (unlink)" #: tests/genfile.c:825 #, c-format msgid "Command exited successfully\n" msgstr "Befehl erfolgreich ausgeführt\n" #: tests/genfile.c:827 #, c-format msgid "Command failed with status %d\n" msgstr "Befehl schlug mit Beendigungsstatus %d fehl.\n" #: tests/genfile.c:831 #, c-format msgid "Command terminated on signal %d\n" msgstr "Befehl beendete sich bei Signal %d\n" #: tests/genfile.c:833 #, c-format msgid "Command stopped on signal %d\n" msgstr "Befehl hieltb bei Signal %d an\n" #: tests/genfile.c:836 #, c-format msgid "Command dumped core\n" msgstr "Befehl erzeugte einen Core-Dump\n" #: tests/genfile.c:839 #, c-format msgid "Command terminated\n" msgstr "Befehl beendet\n" #: tests/genfile.c:871 #, c-format msgid "--stat requires file names" msgstr "--stat erfordert Dateinamen" #~ msgid "Cannot save working directory" #~ msgstr "Kann aktuelles Verzeichnis nicht sichern." #~ msgid "%s: illegal option -- %c\n" #~ msgstr "%s: Unzulässige Option -- %c\n" #~ msgid "" #~ "\n" #~ "Report bugs to <%s>.\n" #~ msgstr "" #~ "\n" #~ "Melden Sie Fehler (auf Englisch, mit LC_ALL=C) an <%s>.\n" #~ msgid "Input string too long" #~ msgstr "Eingabezeichenkette zu lang" #~ msgid "Number syntax error" #~ msgstr "Syntaxfehler in der Zahl" #~ msgid "rmtd: Cannot allocate buffer space\n" #~ msgstr "rmtd: Kann Speicherplatz für Puffer nicht reservieren.\n" #~ msgid "Cannot allocate buffer space" #~ msgstr "Kann keinen Speicher für Puffer reservieren." #~ msgid "Try `%s --help' for more information.\n" #~ msgstr "„%s --help“ zeigt weitere Informationen.\n" #~ msgid "" #~ "Usage: %s [OPTION]\n" #~ "Manipulate a tape drive, accepting commands from a remote process.\n" #~ "\n" #~ " --version Output version info.\n" #~ " --help Output this help.\n" #~ msgstr "" #~ "Aufruf: %s [OPTION]\n" #~ "Arbeiten mit einem Bandlaufwerk, Befehle können von einem anderen Prozess stammen.\n" #~ "\n" #~ " --version Versionsinformation ausgeben\n" #~ " --help diesen Hilfetext ausgeben\n" #~ msgid "Seek offset error" #~ msgstr "Fehler bei der Positionierungsangabe." #~ msgid "Premature end of file" #~ msgstr "Vorzeitiges Dateiende." #~ msgid "Reading %s\n" #~ msgstr "Lese %s.\n" #~ msgid "Error is not recoverable: exiting now" #~ msgstr "Nicht behebbarer Fehler: Programmabbruch. " #~ msgid "suppress this warning." #~ msgstr "--no-wildcards, um diese Warnung zu unterdrücken." #~ msgid "filter the archive through bzip2" #~ msgstr "Archiv durch bzip2 filtern" #~ msgid "filter the archive through gzip" #~ msgstr "Archiv durch gzip filtern" #~ msgid "filter the archive through compress" #~ msgstr "Archiv durch compress filtern" #~ msgid "filter the archive through lzma" #~ msgstr "Archiv durch lzma filtern" #~ msgid "filter the archive through lzop" #~ msgstr "Archiv durch lzop filtern" #~ msgid "Warning: the -I option is not supported; perhaps you meant -j or -T?" #~ msgstr "Warnung: Die Option -I ist nicht unterstützt, meinen Sie -j oder -T?" # Was ist hier genau gemeint? ke #~ msgid "Error exit delayed from previous errors" #~ msgstr "Fehler beim Beenden, verursacht durch vorhergehende Fehler." #~ msgid "[.]NUMBER" #~ msgstr "[.]ZAHL" #~ msgid "block size" #~ msgstr "Blockgröße" #~ msgid "%s: Read error at byte %s, reading %lu byte" #~ msgid_plural "%s: Read error at byte %s, reading %lu bytes" #~ msgstr[0] "%s: Lesefehler bei Byte %s, lese ein Byte" #~ msgstr[1] "%s: Lesefehler bei Byte %s, lese %lu Bytes" #~ msgid "--Mangled file names--\n" #~ msgstr "––Verstümmelte Dateinamen––\n" #~ msgid "Renamed %s to %s" #~ msgstr "%s in %s umbenannt" #~ msgid "%s: Cannot symlink to %s" #~ msgstr "%s: Kann nicht zu „%s“ linken." #~ msgid "Symlinked %s to %s" #~ msgstr "Symbolische Verknüpfung von %s auf %s." #~ msgid "Unknown demangling command %s" #~ msgstr "Unbekanntes Befehl „%s“ beim Zusammensetzen von Namen."