# Danish translation of grub
# Copyright (C) 2010 Free Software Foundation, Inc.
# This file is distributed under the same license as the grub package.
#
# core, kernel -> kerne ???  Ville være bedre med forskellige ord
#
# Ask Hjorth Larsen <asklarsen@gmail.com>, 2010.
msgid ""
msgstr ""
"Project-Id-Version: grub-1.97+20100124\n"
"Report-Msgid-Bugs-To: \n"
"POT-Creation-Date: 2010-01-24 19:29+0000\n"
"PO-Revision-Date: 2010-04-02 15:24+0200\n"
"Last-Translator: Ask Hjorth Larsen <asklarsen@gmail.com>\n"
"Language-Team: Danish <dansk@dansk-gruppen.dk>\n"
"X-Bugs: Report translation errors to the Language-Team address.\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"

#: commands/acpi.c:40
msgid "Don't load host tables specified by comma-separated list."
msgstr "Indlæs ikke værtstabeller angivet i kommaadskilt liste."

#: commands/acpi.c:43
msgid "Load only tables specified by comma-separated list."
msgstr "Indlæs kun tabeller angivet i kommaadskilt liste."

#: commands/acpi.c:44
msgid "Expose v1 tables."
msgstr "Blotlæg v1-tabeller."

#: commands/acpi.c:45
msgid "Expose v2 and v3 tables."
msgstr "Blotlæg v2- og v3-tabeller."

#: commands/acpi.c:46
msgid "Set OEMID of RSDP, XSDT and RSDT."
msgstr "Indstil OEMID for RSDP, XSDT og RSDT."

#: commands/acpi.c:48
msgid "Set OEMTABLE ID of RSDP, XSDT and RSDT."
msgstr "Indstil OEMTABLE ID for RSDP, XSDT og RSDT."

#: commands/acpi.c:50
msgid "Set OEMTABLE revision of RSDP, XSDT and RSDT."
msgstr "Indstil revision af OEMTABLE for RSDP, XSDT og RSDT."

#: commands/acpi.c:52
msgid "Set creator field of RSDP, XSDT and RSDT."
msgstr "Indstil skaberfeltet for RSDP, XSDT og RSDT."

#: commands/acpi.c:54
msgid "Set creator revision of RSDP, XSDT and RSDT."
msgstr "Indstil skaberrevision for RSDP, XSDT og RSDT."

#: commands/acpi.c:55
msgid "Don't update EBDA. May fix failures or hangs on some. BIOSes but makes it ineffective with OS not receiving RSDP from GRUB."
msgstr "Opdatér ikke EBDA. Vil måske forhindre fejl eller nedbrud med visse BIOS'er, men forringer effektiviteten, da operativsystemet ikke modtager RSDP fra GRUB."

#: commands/acpi.c:763
msgid "[-1|-2] [--exclude=TABLE1,TABLE2|--load-only=table1,table2] FILE1 [FILE2] [...]"
msgstr "[-1|-2] [--exclude=TABEL1,TABEL2|--load-only=table1,table2] FIL1 [FIL2] [...]"

#: commands/acpi.c:766
msgid "Load host ACPI tables and tables specified by arguments."
msgstr "Indæs ACPI-værtstabeller og tabeller angivet ved argumenter."

#: commands/blocklist.c:114 commands/cat.c:82 commands/configfile.c:57
#: commands/configfile.c:60 commands/configfile.c:65 commands/crc.c:64
#: commands/i386/pc/play.c:211 commands/minicmd.c:358 loader/i386/bsd.c:1296
#: loader/i386/bsd.c:1300 loader/i386/bsd.c:1304
msgid "FILE"
msgstr "FIL"

#: commands/blocklist.c:114
msgid "Print a block list."
msgstr "Udskriv en blokliste."

#: commands/boot.c:190
msgid "Boot an operating system."
msgstr "Start et operativsystem."

#: commands/cat.c:82 commands/minicmd.c:358
msgid "Show the contents of a file."
msgstr "Vis indholdet af en fil."

#: commands/cmp.c:113
msgid "FILE1 FILE2"
msgstr "FIL1 FIL2"

#: commands/cmp.c:113
msgid "Compare two files."
msgstr "Sammenlign to filer."

#: commands/configfile.c:57
msgid "Load another config file."
msgstr "Indlæs en anden konfigurationsfil."

#: commands/configfile.c:61 commands/configfile.c:66
msgid "Load another config file without changing context."
msgstr "Indlæs en anden konfigurationsfil uden at ændre kontekst."

#: commands/crc.c:65
msgid "Calculate the crc32 checksum of a file."
msgstr "Udregn crc32-kontrolsummen for en fil."

#: commands/date.c:139
msgid "[[year-]month-day] [hour:minute[:second]]"
msgstr "[[år-]måned-dag] [time:minut[:sekund]]"

#: commands/date.c:140
msgid "Command to display/set current datetime."
msgstr "Kommando til at vise/ændre nuværende tidspunkt og dato."

#: commands/echo.c:27
msgid "Do not output the trailing newline."
msgstr "Udskriv ikke afsluttende linjeskiftstegn."

#: commands/echo.c:28
msgid "Enable interpretation of backslash escapes."
msgstr "Aktivér fortolkning af undvigesekvenser med omvendt skråstreg."

#: commands/echo.c:117
msgid "[-e|-n] STRING"
msgstr "[-e|-n] STRENG"

#: commands/echo.c:117
msgid "Display a line of text."
msgstr "Vis en linje af tekst."

#: commands/efi/fixvideo.c:103
msgid "Fix video problem."
msgstr "Fiks videoproblem."

#: commands/efi/loadbios.c:207
msgid "Fake BIOS."
msgstr "Falsk BIOS."

#: commands/efi/loadbios.c:211
msgid "Load BIOS dump."
msgstr "Indlæs BIOS-dump."

#: commands/gptsync.c:244
msgid "DEVICE [PARTITION[+/-[TYPE]]] ..."
msgstr "ENHED [PARTITION[+/-[TYPE]]] ..."

#: commands/gptsync.c:245
msgid "Fill hybrid MBR of GPT drive DEVICE. specified partitions will be a part of hybrid mbr. Up to 3 partitions are allowed. TYPE is an MBR type. + means that partition is active. Only one partition can be active."
msgstr "Fyld hybrid-MBR for GPT-drevet ENHED. Angivne partitioner vil være en del af hybrid-MBR. Op til tre partitioner er tilladt. TYPE er en MBR-type. + betyder, at partitionen er aktiv. Kun én partition kan være aktiv."

#: commands/halt.c:39
msgid "Halts the computer.  This command does not work on all firmware implementations."
msgstr "Standser computeren.  Denne kommando fungerer ikke på alle firmwareimplementationer."

#: commands/handler.c:94
msgid "[class [handler]]"
msgstr "[klasse [håndtering]]"

#: commands/handler.c:95
msgid "List or select a handler."
msgstr "Udskriv eller vælg en håndtering."

#: commands/hdparm.c:30
msgid ""
"Set Advanced Power Management\n"
"(1=low, ..., 254=high, 255=off)."
msgstr ""
"Indstil advanceret strømstyring (APM)\n"
"(1=lav, ..., 254=høj, 255=deaktiveret)."

#: commands/hdparm.c:33
msgid "Check power mode."
msgstr "Kontrollér strømtilstand."

#: commands/hdparm.c:34
msgid "Freeze ATA security settings until reset."
msgstr "Fastlås ATA-sikkerhedsindstillinger indtil nulstilling."

#: commands/hdparm.c:36
msgid "Check SMART health status."
msgstr "Kontrollér SMART-helbredsstatus."

#: commands/hdparm.c:37
msgid ""
"Set Automatic Acoustic Management\n"
"(0=off, 128=quiet, ..., 254=fast)."
msgstr ""
"Indstil Automatic Acoustic Management\n"
"(0=deaktiveret, 128=stille, ..., 254=hurtig)."

# fixmig: ved ikke hvilken 'standby' de taler om eller hvad oversættelsen bør være
#: commands/hdparm.c:40
msgid ""
"Set standby timeout\n"
"(0=off, 1=5s, 2=10s, ..., 240=20m, 241=30m, ...)."
msgstr ""
"Indstil tidsudløb for standby\n"
"(0=deaktiveret, 1=5s, 2=10s, ..., 240=20m, 241=30m, ...)."

#: commands/hdparm.c:43
msgid "Set drive to standby mode."
msgstr "Sæt drevet i ventetilstand (standby)."

#: commands/hdparm.c:44
msgid "Set drive to sleep mode."
msgstr "Sæt drevet i hviletilstand (sleep)."

#: commands/hdparm.c:45
msgid "Print drive identity and settings."
msgstr "Udskriv drevidentitet og indstillinger."

#: commands/hdparm.c:47
msgid "Dump contents of ATA IDENTIFY sector."
msgstr "Dump indhold af ATA IDENTIFY-sektor."

#: commands/hdparm.c:49
msgid "Disable/enable SMART (0/1)."
msgstr "Deaktivér/aktivér SMART (0/1)."

#: commands/hdparm.c:50
msgid "Do not print messages."
msgstr "Udskriv ikke meddelelser."

#: commands/hdparm.c:414
msgid "[OPTIONS] DISK"
msgstr "[TILVALG] DISK"

#: commands/hdparm.c:415
msgid "Get/set ATA disk parameters."
msgstr "Vis/angiv ATA-diskparametre."

#: commands/help.c:103 lib/arg.c:110
msgid "Usage:"
msgstr "Brug:"

#: commands/help.c:136
msgid "[PATTERN ...]"
msgstr "[MØNSTER ...]"

#: commands/help.c:137
msgid "Show a help message."
msgstr "Vis en hjælpebesked."

# jf. man-siden for hexdump, dog omskrevet til noget mere indirekte så der ikke kan opstå misforståelser
#: commands/hexdump.c:30
msgid "Skip offset bytes from the beginning of file."
msgstr "Spring et antal byte over fra filens begyndelse."

#: commands/hexdump.c:32
msgid "Read only LENGTH bytes."
msgstr "Læs kun LÆNGDE byte."

#: commands/hexdump.c:125
msgid "[OPTIONS] FILE_OR_DEVICE"
msgstr "[TILVALG] FIL_ELLER_ENHED"

#: commands/hexdump.c:126
msgid "Dump the contents of a file or memory."
msgstr "Dump indholdet af en fil eller hukommelsen."

#: commands/i386/cpuid.c:37
msgid "Check for long mode flag (default)."
msgstr "Kontrollér for langt tilstandsflag (standard)."

#: commands/i386/cpuid.c:92
msgid "Check for CPU features."
msgstr "Kontrollér for CPU-funktioner."

#: commands/i386/pc/drivemap.c:37
msgid "Show the current mappings."
msgstr "Vis de aktuelle afbildninger."

#: commands/i386/pc/drivemap.c:38
msgid "Reset all mappings to the default values."
msgstr "Nulstil alle afbildninger til standardværdierne."

#: commands/i386/pc/drivemap.c:39
msgid "Perform both direct and reverse mappings."
msgstr "Udfør både direkte og omvendte afbilninger."

#: commands/i386/pc/drivemap.c:407
msgid "-l | -r | [-s] grubdev osdisk."
msgstr "-l | -r | [-s] grubdev osdisk."

#: commands/i386/pc/drivemap.c:408
msgid "Manage the BIOS drive mappings."
msgstr "Håndtér BIOS-drevafbildinger."

#: commands/i386/pc/halt.c:27
msgid "Do not use APM to halt the computer."
msgstr "Brug ikke APM til at standse computeren."

#: commands/i386/pc/halt.c:51
msgid "Halt the system, if possible using APM."
msgstr "Stands systemet, med APM hvis muligt."

#: commands/i386/pc/play.c:211
msgid "Play a tune."
msgstr "Afspil en melodi."

#: commands/i386/pc/pxecmd.c:46
msgid "Unload PXE environment."
msgstr "Afindlæs PXE-miljøet."

# vælger at bruge Extension som en del af navnet jf. strengen nedenfor
#: commands/i386/pc/vbeinfo.c:179
msgid "List compatible VESA BIOS extension video modes."
msgstr "Vis liste af kompatible VESA BIOS Extension-videotilstande."

#: commands/i386/pc/vbetest.c:172
msgid "Test VESA BIOS Extension 2.0+ support."
msgstr "Test understøttelse af VESA BIOS Extension 2.0+."

#: commands/ieee1275/suspend.c:43
msgid "Return to Open Firmware prompt."
msgstr "Vend tilbage til Open Firmware-prompten."

#: commands/keystatus.c:28
msgid "Check Shift key."
msgstr "Kontrollér skift-tasten."

#: commands/keystatus.c:29
msgid "Check Control key."
msgstr "Kontrollér Ctrl-tasten."

#: commands/keystatus.c:30
msgid "Check Alt key."
msgstr "Kontrollér Alt-tasten."

#: commands/keystatus.c:85
msgid "[--shift] [--ctrl] [--alt]"
msgstr "[--shift] [--ctrl] [--alt]"

#: commands/keystatus.c:86
msgid "Check key modifier status."
msgstr "Kontrollér status af modifikationstaster."

#: commands/loadenv.c:33
msgid "Specify filename."
msgstr "Angiv filnavn."

#: commands/loadenv.c:383 commands/loadenv.c:389
msgid "[-f FILE]"
msgstr "[-f FIL]"

#: commands/loadenv.c:384
msgid "Load variables from environment block file."
msgstr "Indlæs variable fra miljøblokfil."

#: commands/loadenv.c:390
msgid "List variables from environment block file."
msgstr "Vis variabelliste fra miljøblokfil."

#: commands/loadenv.c:395
msgid "[-f FILE] variable_name [...]"
msgstr "[-f FIL] variabelnavn [...]"

#: commands/loadenv.c:396
msgid "Save variables to environment block file."
msgstr "Gem variable til miljøblokfil."

#: commands/ls.c:37
msgid "Show a long list with more detailed information."
msgstr "Vis en lang liste med mere detaljeret information."

#: commands/ls.c:38
msgid "Print sizes in a human readable format."
msgstr "Udskriv størrelser i læsevenligt format."

#: commands/ls.c:39
msgid "List all files."
msgstr "Vis liste af alle filer."

#: commands/ls.c:268
msgid "[-l|-h|-a] [FILE]"
msgstr "[-l|-h|-a] [FIL]"

#: commands/ls.c:269
msgid "List devices and files."
msgstr "Vis liste af enheder og filer."

#: commands/lsmmap.c:47
msgid "List memory map provided by firmware."
msgstr "Vis hukommelsesafbildningen tilgængelig via firmware."

#: commands/lspci.c:228
msgid "List PCI devices."
msgstr "Vis liste af PCI-enheder."

#: commands/memrw.c:31
msgid "Save read value into variable VARNAME."
msgstr "Gem den læste værdi i variablen VARNAVN."

#: commands/memrw.c:123 commands/memrw.c:126 commands/memrw.c:129
#: commands/minicmd.c:367
msgid "ADDR"
msgstr "ADR"

#: commands/memrw.c:123
msgid "Read byte from ADDR."
msgstr "Læs byte fra ADR."

# En word er vist to byte, men kan måske være maskinafhængig.  Det er en lidt ualmindelig glose, så jeg bruger den engelske jf. den næste, 'dword', som slet ikke har en dansk oversættelse.
#: commands/memrw.c:126
msgid "Read word from ADDR."
msgstr "Læs word fra ADR."

#: commands/memrw.c:129
msgid "Read dword from ADDR."
msgstr "Læs dword fra ADR."

#: commands/memrw.c:132 commands/memrw.c:135 commands/memrw.c:138
msgid "ADDR VALUE [MASK]"
msgstr "ADR VÆRDI [MASKE]"

#: commands/memrw.c:132
msgid "Write byte VALUE to ADDR."
msgstr "Skriv byte-VÆRDI til ADR."

#: commands/memrw.c:135
msgid "Write word VALUE to ADDR."
msgstr "Skriv word-VÆRDI til ADR."

#: commands/memrw.c:138
msgid "Write dword VALUE to ADDR."
msgstr "Skriv dword-VÆRDI til ADR."

#: commands/minicmd.c:361
msgid "Show this message."
msgstr "Vis denne meddelelse."

#: commands/minicmd.c:364 commands/probe.c:154
msgid "[DEVICE]"
msgstr "[ENHED]"

#: commands/minicmd.c:364
msgid "Set the root device."
msgstr "Indstil rodenheden."

#: commands/minicmd.c:367
msgid "Dump memory."
msgstr "Dump hukommelse."

#: commands/minicmd.c:370
msgid "MODULE"
msgstr "MODUL"

#: commands/minicmd.c:370
msgid "Remove a module."
msgstr "Fjern et modul."

#: commands/minicmd.c:373
msgid "Show loaded modules."
msgstr "Vis indlæste moduler."

#: commands/minicmd.c:376
msgid "Exit from GRUB."
msgstr "Gå ud af GRUB."

#: commands/minicmd.c:379
msgid "Clear the screen."
msgstr "Ryd skærmen."

# Så vidt jeg kan se er det to forskellige værdier, der angives på kommandolinjen, og derfor to ord
#: commands/parttool.c:325
msgid "PARTITION COMMANDS"
msgstr "PARTITION KOMMANDOER"

# Så vidt jeg kan se er det to forskellige værdier, der angives på kommandolinjen, og derfor to ord
#: commands/password.c:78
msgid "USER PASSWORD"
msgstr "BRUGER ADGANGSKODE"

#: commands/password.c:79
msgid "Set user password (plaintext). Unrecommended and insecure."
msgstr "Angiv brugeradgangskode (klartekst). Dette er usikkert og frarådes."

#: commands/probe.c:38
msgid "Set a variable to return value."
msgstr "Sæt en variabel til en returværdi."

#: commands/probe.c:39
msgid "Determine driver."
msgstr "Bestem driver."

#: commands/probe.c:40
msgid "Determine partition map type."
msgstr "Bestem type af partitionsafbildning."

#: commands/probe.c:41
msgid "Determine filesystem type."
msgstr "Bestem type af filsystem."

#: commands/probe.c:42
msgid "Determine filesystem UUID."
msgstr "Bestem UUID for filsystem."

#: commands/probe.c:43
msgid "Determine filesystem label."
msgstr "Bestem etiket for filsystem."

#: commands/probe.c:155
msgid "Retrieve device info."
msgstr "Hent enhedsinformation."

#: commands/read.c:83
msgid "[ENVVAR]"
msgstr "[MILJØVAR]"

#: commands/read.c:84
msgid "Set variable with user input."
msgstr "Sæt variablen med brugerinddata."

#: commands/reboot.c:39
msgid "Reboot the computer."
msgstr "Genstart computeren."

#: commands/search.c:161
msgid "NAME [VARIABLE]"
msgstr "NAVN [VARIABEL]"

#: commands/search_file.c:5
msgid "Search devices by file. If VARIABLE is specified, the first device found is set to a variable."
msgstr "Søg i enheder efter fil. Hvis VARIABEL er angivet, vil variablen blive sat til den først fundne enhed."

#: commands/search_label.c:5
msgid "Search devices by label. If VARIABLE is specified, the first device found is set to a variable."
msgstr "Søg i enheder efter etiket. Hvis VARIABEL er angivet, vil variablen blive sat til den først fundne enhed."

#: commands/search_uuid.c:5
msgid "Search devices by UUID. If VARIABLE is specified, the first device found is set to a variable."
msgstr "Søg i enheder efter UUID. Hvis VARIABEL er angivet, vil variablen blive sat til den først fundne enhed."

#: commands/sleep.c:31
msgid "Verbose countdown."
msgstr "Ekstra udskrift ved nedtælling."

#: commands/sleep.c:32
msgid "Interruptible with ESC."
msgstr "Kan ikke afbrydes med ESC."

#: commands/sleep.c:106
msgid "NUMBER_OF_SECONDS"
msgstr "ANTAL_SEKUNDER"

#: commands/sleep.c:107
msgid "Wait for a specified number of seconds."
msgstr "Vent et givet antal sekunder."

#: commands/test.c:424
msgid "EXPRESSION ]"
msgstr "UDTRYK ]"

#: commands/test.c:424 commands/test.c:426
msgid "Evaluate an expression."
msgstr "Evaluér et udtryk."

#: commands/test.c:426
msgid "EXPRESSION"
msgstr "UDTRYK"

#: commands/true.c:47
msgid "Do nothing, successfully."
msgstr "Gør intet, med success."

#: commands/true.c:50
msgid "Do nothing, unsuccessfully."
msgstr "Gør intet, fejlagtigt."

#: commands/usbtest.c:199
msgid "Test USB support."
msgstr "Test USB-understøttelse."

#: commands/videotest.c:185
msgid "Test video subsystem."
msgstr "Test videoundersystem."

#: commands/xnu_uuid.c:92
msgid "GRUBUUID [VARNAME]"
msgstr "GRUBUUID [VARNAVN]"

#: commands/xnu_uuid.c:93
msgid "Transform 64-bit UUID to format suitable for XNU."
msgstr "Konvertér 64-bits UUID til format, der passer til XNU."

# ?
#: disk/loopback.c:40
msgid "Delete the loopback device entry."
msgstr "Slet indgangen for loopback-enheden."

#: disk/loopback.c:41
msgid "Simulate a hard drive with partitions."
msgstr "Simulér en harddisk med partitioner."

#: disk/loopback.c:249
msgid "[-d|-p] DEVICENAME FILE."
msgstr "[-d|-p] ENHEDSNAVN FIL."

#: disk/loopback.c:250
msgid "Make a device of a file."
msgstr "Gør en fil til en enhed."

# Desværre synes denne streng ikke at være oversat
#: hello/hello.c:43
msgid "Say \"Hello World\"."
msgstr "Sig \"Hello World\"."

#: lib/arg.c:34
msgid "Display this help and exit."
msgstr "Vis denne hjælp og afslut."

#: lib/arg.c:36
msgid "Display the usage of this command and exit."
msgstr "Vis brugsinformation for denne kommando og afslut."

# Denne relaterer vist til nedenstående strenge; man kan vist køre en opstartsindlæser for et andet ('legacy') system, der ligger på computeren
#: loader/efi/appleloader.c:325
msgid "Boot legacy system."
msgstr "Start ældre system."

#: loader/efi/chainloader.c:340 loader/i386/pc/chainloader.c:153
msgid "Load another boot loader."
msgstr "Indlæs en anden opstartsindlæser."

#: loader/i386/bsd.c:65
msgid "Display output on all consoles."
msgstr "Vis udskrift på alle konsoller."

#: loader/i386/bsd.c:66
msgid "Use serial console."
msgstr "Brug seriel konsol."

#: loader/i386/bsd.c:67 loader/i386/bsd.c:93 loader/i386/bsd.c:114
msgid "Ask for file name to reboot from."
msgstr "Spørg om et filnavn, der skal genstartes fra."

#: loader/i386/bsd.c:68
msgid "Use CDROM as root."
msgstr "Brug cd-rom som root."

# ???
#: loader/i386/bsd.c:69
msgid "Invoke user configuration routing."
msgstr "Aktivér brugerkonfigurations-routing."

#: loader/i386/bsd.c:70 loader/i386/bsd.c:97 loader/i386/bsd.c:117
msgid "Enter in KDB on boot."
msgstr "Gå ind i KDB ved opstart."

#: loader/i386/bsd.c:71
msgid "Use GDB remote debugger instead of DDB."
msgstr "Brug GDBs fjernfejlfinder frem for DDB."

#: loader/i386/bsd.c:72
msgid "Disable all boot output."
msgstr "Deaktivér al opstartsudskrift."

#: loader/i386/bsd.c:74
msgid "Wait for keypress after every line of output."
msgstr "Vent på tastetryk efter hver udskrevet linje."

#: loader/i386/bsd.c:76
msgid "Use compiled-in rootdev."
msgstr "Brug indkompileret rootdev."

#: loader/i386/bsd.c:77 loader/i386/bsd.c:96 loader/i386/bsd.c:120
msgid "Boot into single mode."
msgstr "Start i single-tilstand."

#: loader/i386/bsd.c:78 loader/i386/bsd.c:121
msgid "Boot with verbose messages."
msgstr "Start med ekstra information."

#: loader/i386/bsd.c:94 loader/i386/bsd.c:115
msgid "Don't reboot, just halt."
msgstr "Stands kun, genstart ikke."

#: loader/i386/bsd.c:95 loader/i386/bsd.c:116
msgid "Change configured devices."
msgstr "Ændr konfigurerede enheder."

#: loader/i386/bsd.c:98 loader/i386/bsd.c:124
msgid "Set root device."
msgstr "Ændr rodenhed."

#: loader/i386/bsd.c:112
msgid "Disable SMP."
msgstr "Deaktivér SMP."

#: loader/i386/bsd.c:113
msgid "Disable ACPI."
msgstr "Deaktivér ACPI."

#: loader/i386/bsd.c:119
msgid "Don't display boot diagnostic messages."
msgstr "Vis ikke boot-diagonstikmeddelelser."

#: loader/i386/bsd.c:122
msgid "Boot with debug messages."
msgstr "Start op med fejlsøgningsbeskeder."

#: loader/i386/bsd.c:123
msgid "Supress normal output (warnings remain)."
msgstr "Undertryk normal udskrift (advarsler vises stadig)."

#: loader/i386/bsd.c:124
msgid "DEVICE"
msgstr "ENHED"

#: loader/i386/bsd.c:1296
msgid "Load kernel of FreeBSD."
msgstr "Indlæs FreeBSD-kerne."

#: loader/i386/bsd.c:1300
msgid "Load kernel of OpenBSD."
msgstr "Indlæs OpenBSD-kerne."

#: loader/i386/bsd.c:1304
msgid "Load kernel of NetBSD."
msgstr "Indlæs NetBSD-kerne."

#: loader/i386/bsd.c:1308
msgid "Load FreeBSD env."
msgstr "Indlæs FreeBSD-miljø."

#: loader/i386/bsd.c:1311
msgid "Load FreeBSD kernel module."
msgstr "Indlæs FreeBSD-kernemodul."

#: loader/i386/bsd.c:1314
msgid "Load FreeBSD kernel module (ELF)."
msgstr "Indlæs FreeBSD-kernemodul (ELF)."

#: loader/i386/efi/linux.c:1011 loader/i386/ieee1275/linux.c:301
#: loader/i386/linux.c:1007 loader/i386/pc/linux.c:399
#: loader/powerpc/ieee1275/linux.c:353 loader/sparc64/ieee1275/linux.c:520
msgid "Load Linux."
msgstr "Indlæs Linux."

#: loader/i386/efi/linux.c:1013 loader/i386/ieee1275/linux.c:303
#: loader/i386/linux.c:1009 loader/i386/pc/linux.c:402
#: loader/powerpc/ieee1275/linux.c:355 loader/sparc64/ieee1275/linux.c:522
msgid "Load initrd."
msgstr "Indlæs initrd."

#: loader/i386/xnu.c:1032
msgid "Load device-properties dump."
msgstr "Indlæs dump af enhedsegenskaber."

#: loader/multiboot_loader.c:133
msgid "Load a multiboot 2 kernel."
msgstr "Indlæs en multiboot 2-kerne."

#: loader/multiboot_loader.c:136
msgid "Load a multiboot kernel."
msgstr "Indlæs en multiboot-kerne."

#: loader/multiboot_loader.c:141
msgid "Load a multiboot module."
msgstr "Indlæs et multiboot-modul."

#: loader/xnu.c:1407
msgid "Load XNU image."
msgstr "Indlæs XNU-aftryk."

#: loader/xnu.c:1409
msgid "Load 64-bit XNU image."
msgstr "Indlæs 64-bit XNU-aftryk."

#: loader/xnu.c:1411
msgid "Load XNU extension package."
msgstr "Indlæs XNU-udvidelsespakke."

#: loader/xnu.c:1413
msgid "Load XNU extension."
msgstr "Indlæs XNU-udvidelse."

# ?
#: loader/xnu.c:1415
msgid "DIRECTORY [OSBundleRequired]"
msgstr "KATALOG [OSBundleRequired]"

#: loader/xnu.c:1416
msgid "Load XNU extension directory."
msgstr "Indlæs XNU-udvidelseskatalog."

#: loader/xnu.c:1418
msgid "Load XNU ramdisk. It will be seen as md0."
msgstr "Indlæs XNU-ramdisk. Den vil kunne ses som md0."

# ??? splash image lige pludselig?  Det er vel så et billede og ikke et aftryk.  Så vidt jeg kan se i koden er dette eneste forekomst af dén slags.  -Ask
#: loader/xnu.c:1421
msgid "Load a splash image for XNU."
msgstr "Indlæs et startbillede for XNU."

#: loader/xnu.c:1425
msgid "Load XNU hibernate image."
msgstr "Indlæs XNU-dvaleaftryk."

#: normal/auth.c:233
msgid "Enter username: "
msgstr "Indtast brugernavn: "

#: normal/auth.c:238
msgid "Enter password: "
msgstr "Indtast adgangskode: "

#: normal/color.c:80
#, c-format
msgid "Warning: syntax error (missing slash) in `%s'\n"
msgstr "Advarsel: syntaksfejl (manglende skråstreg) i \"%s\"\n"

#: normal/color.c:89
#, c-format
msgid "Warning: invalid foreground color `%s'\n"
msgstr "Advarsel: ugyldig forgrundsfarve \"%s\"\n"

#: normal/color.c:95
#, c-format
msgid "Warning: invalid background color `%s'\n"
msgstr "Advarsel: ugyldig baggrundsfarve \"%s\"\n"

#: normal/dyncmd.c:147
msgid "not loaded"
msgstr "ikke indlæst"

#: normal/main.c:408
#, c-format
msgid "GNU GRUB  version %s"
msgstr "GNU GRUB  version %s"

#: normal/main.c:538
#, c-format
msgid "Minimal BASH-like line editing is supported. For the first word, TAB lists possible command completions. Anywhere else TAB lists possible device or file completions. %s"
msgstr "Minimal BASH-agtig linjeredigering understøttes. For det første ord vil TAB vise de mulige kommandofuldførelser. Alle andre steder vil TAB vise de mulige fuldførelser af enheds- eller filnavne. %s"

#: normal/main.c:541
msgid "ESC at any time exits."
msgstr "ESC på ethvert tidspunkt afslutter."

#: normal/menu_entry.c:1060
msgid "Possible commands are:"
msgstr "Mulige kommandoer er:"

#: normal/menu_entry.c:1064
msgid "Possible devices are:"
msgstr "Mulige enheder er:"

#: normal/menu_entry.c:1068
msgid "Possible files are:"
msgstr "Mulige filer er:"

#: normal/menu_entry.c:1072
msgid "Possible partitions are:"
msgstr "Mulige partitioner er:"

#: normal/menu_entry.c:1076
msgid "Possible arguments are:"
msgstr "Mulige argumenter er:"

#: normal/menu_entry.c:1080
msgid "Possible things are:"
msgstr "Mulige ting er:"

# ???
#: normal/menu_entry.c:1184
msgid "Booting a command list"
msgstr "Starter en kommandoliste"

#: normal/menu_entry.c:1397
msgid "Press any key to continue..."
msgstr "Tryk på en tast for at fortsætte..."

#: normal/menu_text.c:179
msgid "Minimum Emacs-like screen editing is supported. TAB lists completions. Press Ctrl-x to boot, Ctrl-c for a command-line or ESC to return menu."
msgstr "Minimal Emacs-agtig skærmredigering understøttes. TAB viser fuldførelser. Tryk Ctrl-x for at starte, Ctrl-c for at få en kommandolinje, eller ESC for at vende tilbage til menuen."

#: normal/menu_text.c:186
#, c-format
msgid "Use the %C and %C keys to select which entry is highlighted.\n"
msgstr "Brug tasterne %C og %C til at vælge fremhævet punkt.\n"

#: normal/menu_text.c:203
msgid "Press enter to boot the selected OS, 'e' to edit the commands before booting or 'c' for a command-line. ESC to return previous menu.\n"
msgstr "Tryk retur for at starte det valgte operativsystem, \"e\" for at redigere kommandoerne før opstart, eller \"c\" for at få en kommandolinje. ESC vender tilbage til den forrige menu.\n"

#: normal/menu_text.c:211
msgid "Press enter to boot the selected OS, 'e' to edit the commands before booting or 'c' for a command-line.\n"
msgstr "Tryk retur for at starte det valgte operativsystem, \"e\" for at redigere kommandoerne før opstart, eller \"c\" for at få en kommandolinje.\n"

#: normal/menu_text.c:363
#, c-format
msgid "The highlighted entry will be executed automatically in %ds."
msgstr "Det fremhævede punkt vil blive kørt automatisk om %ds."

#: normal/misc.c:41
#, c-format
msgid "Partition %s:"
msgstr "Partition %s:"

#: normal/misc.c:46
#, c-format
msgid "Device %s:"
msgstr "Enhed %s:"

#: normal/misc.c:52
msgid "Filesystem cannot be accessed"
msgstr "Filsystem kan ikke tilgås"

#: normal/misc.c:63
#, c-format
msgid "Filesystem type %s"
msgstr "Filsystemtype %s"

#: normal/misc.c:73
#, c-format
msgid "- Label \"%s\""
msgstr "- Etiket \"%s\""

#: normal/misc.c:88
#, c-format
msgid "- Last modification time %d-%02d-%02d %02d:%02d:%02d %s"
msgstr "- Sidste modifikationstid %d-%02d-%02d %02d:%02d:%02d %s"

#: normal/misc.c:111
msgid "Unknown filesystem"
msgstr "Ukendt filsystem"

#: normal/misc.c:113
msgid "Partition table"
msgstr "Partitionstabel"

#: term/serial.c:46
msgid "Set the serial unit."
msgstr "Angiv den serielle enhed."

#: term/serial.c:47
msgid "Set the serial port address."
msgstr "Angiv adressen for den serielle port."

#: term/serial.c:48
msgid "Set the serial port speed."
msgstr "Angiv hastigheden for den serielle port."

#: term/serial.c:49
msgid "Set the serial port word length."
msgstr "Angiv word-længden for den serielle port."

#: term/serial.c:50
msgid "Set the serial port parity."
msgstr "Angiv pariteten for den serielle port."

#: term/serial.c:51
msgid "Set the serial port stop bits."
msgstr "Angiv stop-bit for den serielle port."

#: util/grub-mkrawimage.c:67
msgid "the core image is too small"
msgstr "kerneaftrykket er for lille"

#: util/grub-mkrawimage.c:79
msgid "cannot compress the kernel image"
msgstr "kan ikke komprimere kerneaftryk"

#: util/grub-mkrawimage.c:154
msgid "prefix is too long"
msgstr "præfiks er for langt"

#: util/grub-mkrawimage.c:240
msgid "the core image is too big"
msgstr "kerneaftrykket er for stort"

# bemærk: omkringstående linjer har småt begyndelsesbogstav
#: util/grub-mkrawimage.c:245
#, c-format
msgid "diskboot.img size must be %u bytes"
msgstr "størrelsen af diskboot.img skal være %u byte"

#: util/grub-mkrawimage.c:328
#, c-format
msgid "core image is too big (%p > %p)"
msgstr "kerneaftrykket er for stort (%p > %p)"

#: util/grub-mkrawimage.c:432 util/i386/pc/grub-setup.c:587
#, c-format
msgid "Try `%s --help' for more information.\n"
msgstr "Kør \"%s --help\" for yderligere information.\n"

#: util/grub-mkrawimage.c:434
#, c-format
msgid ""
"Usage: %s [OPTION]... [MODULES]\n"
"\n"
"Make a bootable image of GRUB.\n"
"\n"
"  -d, --directory=DIR     use images and modules under DIR [default=%s]\n"
"  -p, --prefix=DIR        set grub_prefix directory [default=%s]\n"
"  -m, --memdisk=FILE      embed FILE as a memdisk image\n"
"  -f, --font=FILE         embed FILE as a boot font\n"
"  -c, --config=FILE       embed FILE as boot config\n"
"  -o, --output=FILE       output a generated image to FILE [default=stdout]\n"
"  -O, --format=FORMAT     generate an image in format [default="
msgstr ""
"Brug: %s [TILVALG]... [MODULER]\n"
"\n"
"Opret et kørbart aftryk af GRUB.\n"
"\n"
"  -d, --directory=KAT     brug aftryk og moduler under KAT [standard=%s]\n"
"  -p, --prefix=KAT        angiv katalog for grub_prefix [standard=%s]\n"
"  -m, --memdisk=FIL       indlejr FIL som memdisk-aftryk\n"
"  -f, --font=FIL          indlejr FIL som opstartsskrifttype\n"
"  -c, --config=FIL        indlejr FIL som opstartskonfiguration\n"
"  -o, --output=FIL        udskriv genereret aftryk til FIL [standard=stdout]\n"
"  -O, --format=FORMAT     generér et aftryk i FORMAT [standard="

#: util/grub-mkrawimage.c:573
#, c-format
msgid "cannot open %s"
msgstr "kan ikke åbne %s"

#: util/i386/pc/grub-setup.c:159
msgid "the first sector of the core file is not sector-aligned"
msgstr "første sektor af kernefilen er ikke sektorjusteret"

#: util/i386/pc/grub-setup.c:173
msgid "non-sector-aligned data is found in the core file"
msgstr "ikke-sektorjusterede data fundet i kernefilen"

#: util/i386/pc/grub-setup.c:187
msgid "the sectors of the core file are too fragmented"
msgstr "sektorerne i kernefilen er for fragmenterede"

#: util/i386/pc/grub-setup.c:198
#, c-format
msgid "the size of `%s' is not %u"
msgstr "størrelsen af \"%s\" er ikke %u"

#: util/i386/pc/grub-setup.c:215
#, c-format
msgid "the size of `%s' is too small"
msgstr "størrelsen af \"%s\" er for lille"

#: util/i386/pc/grub-setup.c:217
#, c-format
msgid "the size of `%s' is too large"
msgstr "størrelsen af \"%s\" er for stor"

#: util/i386/pc/grub-setup.c:254
#, c-format
msgid "unable to identify a filesystem in %s; safety check can't be performed"
msgstr "kan ikke identificere noget filsystem i %s; sikkerhedstjek kan ikke udføres"

#: util/i386/pc/grub-setup.c:258
#, c-format
msgid "%s appears to contain a %s filesystem which isn't known to reserve space for DOS-style boot.  Installing GRUB there could result in FILESYSTEM DESTRUCTION if valuable data is overwritten by grub-setup (--skip-fs-probe disables this check, use at your own risk)"
msgstr "%s synes at indeholde et %s-filsystem, for hvilket det ikke vides om der er reserveret plads til DOS-agtig opstart.  Installation af GRUB der vil måske resultere i ØDELÆGGELSE AF FILSYSTEMET, hvis værdifulde data overskrives af grub-setup (--skip-fs-probe deaktiverer denne kontrol - bruges på eget ansvar)"

#: util/i386/pc/grub-setup.c:307
msgid "no DOS-style partitions found"
msgstr "ingen DOS-agtige partitioner fundet"

#: util/i386/pc/grub-setup.c:323 util/i386/pc/grub-setup.c:348
msgid "Attempting to install GRUB to a partitionless disk.  This is a BAD idea."
msgstr "Forsøger at installere GRUB på en partitionsløs disk.  Dette er en DÅRLIG idé."

#: util/i386/pc/grub-setup.c:329
msgid "Attempting to install GRUB to a partition instead of the MBR.  This is a BAD idea."
msgstr "Forsøger at installere GRUB til en partition frem for MBR.  Dette er en DÅRLIG idé."

#: util/i386/pc/grub-setup.c:357
msgid "No DOS-style partitions found"
msgstr "Ingen DOS-agtige partitioner fundet"

#: util/i386/pc/grub-setup.c:362
msgid "This msdos-style partition label has no post-MBR gap; embedding won't be possible!"
msgstr "Denne msdos-agtige partitionsetiket har intet post-MBR-mellerum; indlejring vil ikke være muligt!"

#: util/i386/pc/grub-setup.c:364
msgid "This GPT partition label has no BIOS Boot Partition; embedding won't be possible!"
msgstr "Denne GPT-partitionsetiket har ingen BIOS-opstartspartition; indlejring vil være umulig!"

#: util/i386/pc/grub-setup.c:371
msgid "Your core.img is unusually large.  It won't fit in the embedding area."
msgstr "Din core.img er usædvanlig stor og vil ikke passe ind i indlejringsområdet."

#: util/i386/pc/grub-setup.c:373
msgid "Your embedding area is unusually small.  core.img won't fit in it."
msgstr "Dit indlejringsområde er usædvanligt lille.  Der er ikke plads til core.img."

#: util/i386/pc/grub-setup.c:416
msgid "embedding is not possible, but this is required when the root device is on a RAID array or LVM volume"
msgstr "indlejring er ikke muligt, men dette kræves når rodenheden ligger på en RAID-række eller LVM-diskenhed"

#: util/i386/pc/grub-setup.c:419
msgid "Embedding is not possible.  GRUB can only be installed in this setup by using blocklists.  However, blocklists are UNRELIABLE and its use is discouraged."
msgstr "Indlejring er ikke muligt.  GRUB kan kun installeres i denne konfiguration ved brug af bloklister.  Dog er bloklister UTILREGNELIGE og deres brug frarådes."

#: util/i386/pc/grub-setup.c:423
msgid "if you really want blocklists, use --force"
msgstr "hvis du virkelig vil have bloklister, så brug --force"

#: util/i386/pc/grub-setup.c:439
#, c-format
msgid "attempting to read the core image `%s' from GRUB"
msgstr "forsøger at læse kerneaftrykket \"%s\" fra GRUB"

#: util/i386/pc/grub-setup.c:440
#, c-format
msgid "attempting to read the core image `%s' from GRUB again"
msgstr "forsøger at læse kerneaftrykket \"%s\" fra GRUB igen"

#: util/i386/pc/grub-setup.c:498
#, c-format
msgid "cannot read `%s' correctly"
msgstr "kan ikke læse \"%s\" korrekt"

#: util/i386/pc/grub-setup.c:511
msgid "no terminator in the core image"
msgstr "ingen terminator i kerneaftrykket"

#: util/i386/pc/grub-setup.c:522
msgid "failed to read the first sector of the core image"
msgstr "kunne ikke læse første sektor af kerneaftrykket"

#: util/i386/pc/grub-setup.c:528
msgid "failed to read the rest sectors of the core image"
msgstr "kunne ikke læse restsektorerne i kerneaftrykket"

#: util/i386/pc/grub-setup.c:547
#, c-format
msgid "cannot open `%s'"
msgstr "kan ikke åbne \"%s\""

#: util/i386/pc/grub-setup.c:589
#, c-format
msgid ""
"Usage: %s [OPTION]... DEVICE\n"
"\n"
"Set up images to boot from DEVICE.\n"
"DEVICE must be a GRUB device (e.g. `(hd0,1)').\n"
"\n"
"  -b, --boot-image=FILE   use FILE as the boot image [default=%s]\n"
"  -c, --core-image=FILE   use FILE as the core image [default=%s]\n"
"  -d, --directory=DIR     use GRUB files in the directory DIR [default=%s]\n"
"  -m, --device-map=FILE   use FILE as the device map [default=%s]\n"
"  -r, --root-device=DEV   use DEV as the root device [default=guessed]\n"
"  -f, --force             install even if problems are detected\n"
"  -s, --skip-fs-probe     do not probe for filesystems in DEVICE\n"
"  -h, --help              display this message and exit\n"
"  -V, --version           print version information and exit\n"
"  -v, --verbose           print verbose messages\n"
"\n"
"Report bugs to <%s>.\n"
msgstr ""
"Brug: %s [TILVALG]... ENHED\n"
"\n"
"Konfigurér aftryk til opstart fra ENHED.\n"
"ENHED skal være en GRUB-enhed (f.eks. \"(hd0,1)\".\n"
"\n"
"  -b, --boot-image=FIL    brug FIL som opstartsaftryk [standard=%s]\n"
"  -c, --core-image=FIL    brug FIL som kerneaftryk [standard=%s]\n"
"  -d, --directory=KAT     brug GRUB-filer i kataloget DIR [standard=%s]\n"
"  -m, --device-map=FIL    brug FIL som enhedsafbildning [standard=%s]\n"
"  -r, --root-device=ROD   brug ROD som rodenhed [standard=guessed]\n"
"  -f, --force             installér selv hvis der opdages problemer\n"
"  -s, --skip-fs-probe     undersøg ikke ENHED for filsystemer\n"
"  -h, --help              vis denne besked og afslut\n"
"  -V, --version           udskriv versionsinformation og afslut\n"
"  -v, --verbose           udskriv ekstra information\n"
"\n"
"Rapportér fejl til <%s>.\n"

#: util/i386/pc/grub-setup.c:719
#, c-format
msgid "No device is specified.\n"
msgstr "Ingen enhed angivet.\n"

#: util/i386/pc/grub-setup.c:725
#, c-format
msgid "Unknown extra argument `%s'.\n"
msgstr "Ukendt ekstra argument \"%s\".\n"

#: util/i386/pc/grub-setup.c:742
#, c-format
msgid "Invalid device `%s'.\n"
msgstr "Ugyldig enhed \"%s\".\n"

#: util/i386/pc/grub-setup.c:755
#, c-format
msgid "invalid root device `%s'"
msgstr "ugyldig rodenhed \"%s\""

#: util/i386/pc/grub-setup.c:768
msgid "cannot guess the root device. Specify the option `--root-device'"
msgstr "kan ikke gætte rodenheden. Brug tilvalget \"--root-device\""

#: util/grub.d/10_kfreebsd.in:40
msgid "%s, with kFreeBSD %s"
msgstr "%s, med kFreeBSD %s"

#: util/grub.d/10_kfreebsd.in:48
msgid "Loading kernel of FreeBSD %s ..."
msgstr "Indlæser FreeBSD-kerne %s ..."

#: util/grub.d/10_linux.in:57
msgid "%s, with Linux %s (recovery mode)"
msgstr "%s, med Linux %s (genoprettelsestilstand)"

#: util/grub.d/10_linux.in:59
msgid "%s, with Linux %s"
msgstr "%s, med Linux %s"

#: util/grub.d/10_linux.in:77
msgid "Loading Linux %s ..."
msgstr "Indlæser Linux %s ..."

#: util/grub.d/10_linux.in:82
msgid "Loading initial ramdisk ..."
msgstr "Indlæser startramdisk ..."