# Traditional Chinese translation for rpm.
# Copyright (C) 2006 Free Software Foundation, Inc.
# This file is distributed under the same license as the rpm package.
# Lie_Ex <lilith.ex@gmail.com>, 2006.
# Wei-Lun Chao <chaoweilun@gmail.com>, 2006, 2007.
#
msgid ""
msgstr ""
"Project-Id-Version: rpm 4.4.9\n"
"Report-Msgid-Bugs-To: <rpm-devel@lists.dulug.duke.edu>\n"
"POT-Creation-Date: 2007-05-21 07:46-0400\n"
"PO-Revision-Date: 2007-12-29 21:21+0800\n"
"Last-Translator: Wei-Lun Chao <chaoweilun@gmail.com>\n"
"Language-Team: Chinese (traditional) <zh-l10n@linux.org.tw>\n"
"X-Bugs: Report translation errors to the Language-Team address.\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Plural-Forms: nplurals=1; plural=0;\n"

#: build.c:40
msgid "Failed build dependencies:\n"
msgstr "相依性組建失敗：\n"

#: build.c:71
#, c-format
msgid "Unable to open spec file %s: %s\n"
msgstr "無法開啟規格檔案 %s：%s\n"

#: build.c:146 build.c:158
#, c-format
msgid "Failed to open tar pipe: %m\n"
msgstr "無法開啟打包管道：%m\n"

#: build.c:165
#, c-format
msgid "Failed to read spec file from %s\n"
msgstr "無法從 %s 讀取規格檔案\n"

#: build.c:193
#, c-format
msgid "Failed to rename %s to %s: %m\n"
msgstr "無法將 %s 更名為 %s：%m\n"

#: build.c:233
#, c-format
msgid "failed to stat %s: %m\n"
msgstr "無法檢視 %s 的狀態：%m\n"

#: build.c:238
#, c-format
msgid "File %s is not a regular file.\n"
msgstr "%s 不是一個正常的檔案。\n"

#: build.c:247
#, c-format
msgid "File %s does not appear to be a specfile.\n"
msgstr "%s 似乎不是一個規格檔案。\n"

#: build.c:320
#, c-format
msgid "Building target platforms: %s\n"
msgstr "組建目標平臺：%s\n"

#: build.c:335 build/spec.c:786
#, c-format
msgid "    target platform: %s\n"
msgstr "    目標平臺：%s\n"

#: rpmqv.c:77
msgid "Query options (with -q or --query):"
msgstr "查詢選項 (使用 -q 或 --query)："

#: rpmqv.c:80
msgid "Verify options (with -V or --verify):"
msgstr "校驗選項 (使用 -V 或 --verify)："

#: rpmqv.c:84
msgid "Source options (with --query or --verify):"
msgstr "原始碼選項 (使用 --query 或 --verify)："

#: rpmqv.c:91
msgid "Dependency check/order options:"
msgstr "相依性檢查/排序選項："

#: rpmqv.c:97
msgid "File tree walk options (with --ftswalk):"
msgstr "檔案樹遍歷選項 (使用 --ftswalk)："

#: rpmqv.c:103
msgid "Signature options:"
msgstr "簽章選項："

#: rpmqv.c:109
msgid "Database options:"
msgstr "資料庫選項："

#: rpmqv.c:115
msgid "Build options with [ <specfile> | <tarball> | <source package> ]:"
msgstr "組建選項中使用 [ <規格檔> | <打包檔> | <原始碼套件> ]："

#: rpmqv.c:121
msgid "Install/Upgrade/Erase options:"
msgstr "安裝/更新/清除選項："

#: rpmqv.c:126 tools/rpmdeps.c:154
msgid "Common options for all rpm modes and executables:"
msgstr "用於所有 rpm 模式和可執行檔案的共同選項："

#: rpmqv.c:143 lib/poptI.c:43
#, c-format
msgid "%s: %s\n"
msgstr "%s：%s\n"

#: rpmqv.c:151 lib/poptALL.c:152
#, c-format
msgid "RPM version %s\n"
msgstr "RPM 版本 %s\n"

#: rpmqv.c:158
#, c-format
msgid "Copyright (C) 1998-2002 - Red Hat, Inc.\n"
msgstr "Copyright (C) 1998-2002 - Red Hat，Inc.\n"

#: rpmqv.c:159
#, c-format
msgid "This program may be freely redistributed under the terms of the GNU GPL\n"
msgstr "此程式允許在遵守 GNU GPL 協定的前提下自由散布\n"

#: rpmqv.c:295 rpmqv.c:301 rpmqv.c:307 rpmqv.c:344
msgid "only one major mode may be specified"
msgstr "只能指定一個主要工作模式"

#: rpmqv.c:323
msgid "one type of query/verify may be performed at a time"
msgstr "只有查詢/校驗兩種工作模式能被同時選用"

#: rpmqv.c:327
msgid "unexpected query flags"
msgstr "不可預料的查詢旗標"

#: rpmqv.c:330
msgid "unexpected query format"
msgstr "不可預料的查詢格式"

#: rpmqv.c:333
msgid "unexpected query source"
msgstr "不可預料的查詢來源"

#: rpmqv.c:376
msgid "only installation, upgrading, rmsource and rmspec may be forced"
msgstr "只有安裝、更新、移除原始碼檔案、移除規格檔案幾種作業可被強制執行"

#: rpmqv.c:378
msgid "files may only be relocated during package installation"
msgstr "在套件安裝時檔案可以被重新部署"

#: rpmqv.c:381
msgid "cannot use --prefix with --relocate or --excludepath"
msgstr "--prefix 不能和 --relocate 或 --excludepath 同時使用"

#: rpmqv.c:384
msgid "--relocate and --excludepath may only be used when installing new packages"
msgstr "--relocate 和 --excludepath 只能在安裝新軟體時使用"

#: rpmqv.c:387
msgid "--prefix may only be used when installing new packages"
msgstr "--prefix 只能在安裝新軟體時使用"

#: rpmqv.c:390
msgid "arguments to --prefix must begin with a /"
msgstr "--prefix 的引數必須以「/」開頭"

#: rpmqv.c:393
msgid "--hash (-h) may only be specified during package installation"
msgstr "--hash (-h) 選項只能在套件安裝時指定"

#: rpmqv.c:397
msgid "--percent may only be specified during package installation"
msgstr "--percent 選項只能在套件安裝時指定"

#: rpmqv.c:401
msgid "--replacepkgs may only be specified during package installation"
msgstr "--replacepkgs 選項只能在套件安裝時指定"

#: rpmqv.c:405
msgid "--excludedocs may only be specified during package installation"
msgstr "--excludedocs 選項只能在套件安裝時指定"

#: rpmqv.c:409
msgid "--includedocs may only be specified during package installation"
msgstr "--includedocs 選項只能在套件安裝時指定"

#: rpmqv.c:413
msgid "only one of --excludedocs and --includedocs may be specified"
msgstr "--excludedocs 和 --includedocs 兩個選項中只能指定一個"

#: rpmqv.c:417
msgid "--ignorearch may only be specified during package installation"
msgstr "--ignorearch 選項只能在套件安裝時指定"

#: rpmqv.c:421
msgid "--ignoreos may only be specified during package installation"
msgstr "--ignoreos 選項只能在套件安裝時指定"

#: rpmqv.c:426
msgid "--ignoresize may only be specified during package installation"
msgstr "--ignoresize 選項只能在套件安裝時指定"

#: rpmqv.c:430
msgid "--allmatches may only be specified during package erasure"
msgstr "--allmatches 選項只能在套件清除時指定"

#: rpmqv.c:434
msgid "--allfiles may only be specified during package installation"
msgstr "--allfiles 選項只能在套件安裝時指定"

#: rpmqv.c:439
msgid "--justdb may only be specified during package installation and erasure"
msgstr "--justdb 選項只能在套件安裝和清除時指定"

#: rpmqv.c:444
msgid "script disabling options may only be specified during package installation and erasure"
msgstr "與命令稿停用有關的選項只能在套件安裝和清除時指定"

#: rpmqv.c:449
msgid "trigger disabling options may only be specified during package installation and erasure"
msgstr "與觸發停用有關的選項只能在套件安裝和清除時指定"

#: rpmqv.c:453
msgid "--nodeps may only be specified during package building, rebuilding, recompilation, installation,erasure, and verification"
msgstr "--nodeps 選項只能在套件的組建、重建、重編譯、安裝、清除和校驗時指定"

#: rpmqv.c:458
msgid "--test may only be specified during package installation, erasure, and building"
msgstr "--test 選項只能在套件的安裝、清除和組建時指定"

#: rpmqv.c:463
msgid "--root (-r) may only be specified during installation, erasure, querying, and database rebuilds"
msgstr "--root(-r) 選項只能在套件的安裝、清除、查詢和資料庫重建時指定"

#: rpmqv.c:475
msgid "arguments to --root (-r) must begin with a /"
msgstr "--root (-r) 的引數必須以「/」開頭"

#: rpmqv.c:499
#, c-format
msgid "no files to sign\n"
msgstr "沒有要簽章的檔案\n"

#: rpmqv.c:504
#, c-format
msgid "cannot access file %s\n"
msgstr "無法存取檔案 %s\n"

#: rpmqv.c:524
#, c-format
msgid "pgp not found: "
msgstr "找不到 pgp： "

#: rpmqv.c:532
msgid "Enter pass phrase: "
msgstr "輸入密文： "

#: rpmqv.c:534
#, c-format
msgid "Pass phrase check failed\n"
msgstr "密文偵測失敗\n"

#: rpmqv.c:538
#, c-format
msgid "Pass phrase is good.\n"
msgstr "密文很好。\n"

#: rpmqv.c:543
#, c-format
msgid "Invalid %%_signature spec in macro file.\n"
msgstr "在巨集定義檔案中有不正確的 %%_signature 規格。\n"

#: rpmqv.c:550
msgid "--sign may only be used during package building"
msgstr "--sign 選項只能在套件組建時指定"

#: rpmqv.c:567
#, c-format
msgid "exec failed\n"
msgstr "執行失敗\n"

#: rpmqv.c:603
msgid "no packages files given for rebuild"
msgstr "沒有指定要重建的套件名稱"

#: rpmqv.c:673
msgid "no spec files given for build"
msgstr "沒有指定用於組建的規格檔案名稱"

#: rpmqv.c:675
msgid "no tar files given for build"
msgstr "沒有指定用於組建的打包檔案名稱"

#: rpmqv.c:696
msgid "no packages given for erase"
msgstr "沒有指定要清除的套件名稱"

#: rpmqv.c:740
msgid "no packages given for install"
msgstr "沒有指定要安裝的套件名稱"

#: rpmqv.c:760
msgid "no arguments given for query"
msgstr "沒有指定查詢引數"

#: rpmqv.c:777
msgid "no arguments given for verify"
msgstr "沒有指定校驗引數"

#: rpmqv.c:792
msgid "no arguments given"
msgstr "沒有指定引數"

#: build/build.c:138 build/pack.c:609
msgid "Unable to open temp file.\n"
msgstr "無法開啟暫時檔案。\n"

#: build/build.c:231
#, c-format
msgid "Executing(%s): %s\n"
msgstr "正在執行 (%s)：%s\n"

#: build/build.c:241
#, c-format
msgid "Exec of %s failed (%s): %s\n"
msgstr "執行 %s 失敗 (%s)：%s\n"

#: build/build.c:250
#, c-format
msgid "Bad exit status from %s (%s)\n"
msgstr "來自 (%s) 錯誤的離開狀態 (%s)\n"

#: build/build.c:361
msgid ""
"\n"
"\n"
"RPM build errors:\n"
msgstr ""
"\n"
"\n"
"RPM 組建錯誤：\n"

#: build/expression.c:228
msgid "syntax error while parsing ==\n"
msgstr "解析「==」時有語法錯誤\n"

#: build/expression.c:258
msgid "syntax error while parsing &&\n"
msgstr "解析「&&」時有語法錯誤\n"

#: build/expression.c:267
msgid "syntax error while parsing ||\n"
msgstr "解析「||」時有語法錯誤\n"

#: build/expression.c:310
msgid "parse error in expression\n"
msgstr "運算式解析錯誤\n"

#: build/expression.c:352
msgid "unmatched (\n"
msgstr "不匹配的「(」\n"

#: build/expression.c:384
msgid "- only on numbers\n"
msgstr "「-」只能用於數字\n"

#: build/expression.c:400
msgid "! only on numbers\n"
msgstr "「!」只能用於數字\n"

#: build/expression.c:448 build/expression.c:503 build/expression.c:568
#: build/expression.c:665
msgid "types must match\n"
msgstr "類型必須匹配\n"

#: build/expression.c:461
msgid "* / not suported for strings\n"
msgstr "不支援將「*」、「/」用於字串\n"

#: build/expression.c:519
msgid "- not suported for strings\n"
msgstr "不支援將「-」用於字串\n"

#: build/expression.c:678
msgid "&& and || not suported for strings\n"
msgstr "不支援將「&&」和「||」用於字串\n"

#: build/expression.c:712 build/expression.c:761
msgid "syntax error in expression\n"
msgstr "運算式中有語法錯誤\n"

#: build/files.c:290
#, c-format
msgid "TIMECHECK failure: %s\n"
msgstr "時間檢查失敗：%s\n"

#: build/files.c:355 build/files.c:555 build/files.c:751
#, c-format
msgid "Missing '(' in %s %s\n"
msgstr "在 %s %s 中有缺失的「(」\n"

#: build/files.c:366 build/files.c:685 build/files.c:762
#, c-format
msgid "Missing ')' in %s(%s\n"
msgstr "在 %s(%s 中有缺失的「)」\n"

#: build/files.c:404 build/files.c:710
#, c-format
msgid "Invalid %s token: %s\n"
msgstr "無效的 %s 符記：%s\n"

#: build/files.c:514
#, c-format
msgid "Missing %s in %s %s\n"
msgstr "在 %s %s 中有缺失的「%s」\n"

#: build/files.c:571
#, c-format
msgid "Non-white space follows %s(): %s\n"
msgstr "%s() 之後有非空白空格：%s\n"

#: build/files.c:609
#, c-format
msgid "Bad syntax: %s(%s)\n"
msgstr "不當的語法：%s(%s)\n"

#: build/files.c:619
#, c-format
msgid "Bad mode spec: %s(%s)\n"
msgstr "不當的模式 spec：%s(%s)\n"

#: build/files.c:631
#, c-format
msgid "Bad dirmode spec: %s(%s)\n"
msgstr "不當的 dirmode spec：%s(%s)\n"

#: build/files.c:789
#, c-format
msgid "Unusual locale length: \"%.*s\" in %%lang(%s)\n"
msgstr "不尋常的語區長度：\"%.*s\" 於 %%lang(%s) 之中\n"

#: build/files.c:800
#, c-format
msgid "Duplicate locale %.*s in %%lang(%s)\n"
msgstr "重製語區 %.*s 於 %%lang(%s) 之中\n"

#: build/files.c:930
#, c-format
msgid "Hit limit for %%docdir\n"
msgstr "%%docdir 的數量上限\n"

#: build/files.c:938
#, c-format
msgid "Only one arg for %%docdir\n"
msgstr "%%docdir 只能有一個引數\n"

#: build/files.c:972
#, c-format
msgid "Two files on one line: %s\n"
msgstr "兩個檔案在同一列中：%s\n"

#: build/files.c:994
#, c-format
msgid "File must begin with \"/\": %s\n"
msgstr "檔案必須以「/」開頭：%s\n"

#: build/files.c:1012
#, c-format
msgid "Can't mix special %%doc with other forms: %s\n"
msgstr "無法將特殊 %%doc 與其他形式混合：%s\n"

#: build/files.c:1029
#, c-format
msgid "illegal _docdir_fmt: %s\n"
msgstr "不合法的 _docdir_fmt：%s\n"

#: build/files.c:1307
#, c-format
msgid "File listed twice: %s\n"
msgstr "曾列出兩次的檔案：%s\n"

#: build/files.c:1481
#, c-format
msgid "Symlink points to BuildRoot: %s -> %s\n"
msgstr "到 BuildRoot 的符號連結：%s -> %s\n"

#: build/files.c:1738
#, c-format
msgid "File doesn't match prefix (%s): %s\n"
msgstr "檔案與字首不匹配 (%s)：%s\n"

#: build/files.c:1762
#, c-format
msgid "File not found: %s\n"
msgstr "檔案找不到：%s\n"

#: build/files.c:1977
#, c-format
msgid "%s: can't load unknown tag (%d).\n"
msgstr "%s：無法呼叫不明的標記 (%d)。\n"

#: build/files.c:1983
#, c-format
msgid "%s: public key read failed.\n"
msgstr "%s：公鑰讀入失敗。\n"

#: build/files.c:1987 lib/rpmchecksig.c:614
#, c-format
msgid "%s: not an armored public key.\n"
msgstr "%s：不是一個受保護的公鑰。\n"

#: build/files.c:1994
#, c-format
msgid "%s: *.te policy read failed.\n"
msgstr "%s: *.te 策略讀取失敗。\n"

#: build/files.c:2047
#, c-format
msgid "File needs leading \"/\": %s\n"
msgstr "檔案需要以「/」開頭：%s\n"

#: build/files.c:2071
#, c-format
msgid "Glob not permitted: %s\n"
msgstr "不容許以萬用字元解析：%s\n"

#: build/files.c:2088 lib/rpminstall.c:375
#, c-format
msgid "File not found by glob: %s\n"
msgstr "以萬用字元解析找不到檔案：%s\n"

#: build/files.c:2148
#, c-format
msgid "Could not open %%files file %s: %s\n"
msgstr "無法開啟 %%files 的檔案 %s: %s\n"

#: build/files.c:2159 build/pack.c:155
#, c-format
msgid "line: %s\n"
msgstr "列：%s\n"

#: build/files.c:2544
#, c-format
msgid "Bad file: %s: %s\n"
msgstr "損壞的檔案：%s：%s\n"

#: build/files.c:2556 build/parsePrep.c:50
#, c-format
msgid "Bad owner/group: %s\n"
msgstr "損壞的所有者/組別：%s\n"

#: build/files.c:2601
#, c-format
msgid "Checking for unpackaged file(s): %s\n"
msgstr "正在檢查未被打包的檔案：%s\n"

#: build/files.c:2618
#, c-format
msgid ""
"Installed (but unpackaged) file(s) found:\n"
"%s"
msgstr ""
"發現被安裝但未被打包的檔案：\n"
"%s"

#: build/files.c:2648
#, c-format
msgid "Processing files: %s-%s-%s\n"
msgstr "正在處理檔案：%s-%s-%s\n"

#: build/names.c:56
msgid "getUname: too many uid's\n"
msgstr "getUname：過多的 uid\n"

#: build/names.c:82
msgid "getUnameS: too many uid's\n"
msgstr "getUnameS：過多的 uid\n"

#: build/names.c:111
msgid "getUidS: too many uid's\n"
msgstr "getUidS：過多的 uid\n"

#: build/names.c:140
msgid "getGname: too many gid's\n"
msgstr "getGname：過多的 gid\n"

#: build/names.c:166
msgid "getGnameS: too many gid's\n"
msgstr "getGnameS：過多的 gid\n"

#: build/names.c:195
msgid "getGidS: too many gid's\n"
msgstr "getGidS：過多的 gid\n"

#: build/names.c:237
#, c-format
msgid "Could not canonicalize hostname: %s\n"
msgstr "無法標準化主電腦名稱：%s\n"

#: build/pack.c:90
#, c-format
msgid "create archive failed on file %s: %s\n"
msgstr "建立檔案 %s 的保存失敗：%s\n"

#: build/pack.c:93
#, c-format
msgid "create archive failed: %s\n"
msgstr "建立保存失敗：%s\n"

#: build/pack.c:115
#, c-format
msgid "cpio_copy write failed: %s\n"
msgstr "cpio_copy 寫作業失敗：%s\n"

#: build/pack.c:122
#, c-format
msgid "cpio_copy read failed: %s\n"
msgstr "cpio_copy 讀作業失敗：%s\n"

#: build/pack.c:219 build/pack.c:233
#, c-format
msgid "Could not open PreIn file: %s\n"
msgstr "無法開啟預先安裝命令稿：%s\n"

#: build/pack.c:226
#, c-format
msgid "Could not open PreUn file: %s\n"
msgstr "無法開啟預先清除命令稿：%s\n"

#: build/pack.c:240
#, c-format
msgid "Could not open PostIn file: %s\n"
msgstr "無法開啟安裝後命令稿：%s\n"

#: build/pack.c:247 build/pack.c:254
#, c-format
msgid "Could not open PostUn file: %s\n"
msgstr "無法開啟清除後命令稿：%s\n"

#: build/pack.c:262
#, c-format
msgid "Could not open VerifyScript file: %s\n"
msgstr "無法開啟校驗命令稿檔案：%s\n"

#: build/pack.c:277
#, c-format
msgid "Could not open Trigger script file: %s\n"
msgstr "無法開啟觸發執行命令稿檔案：%s\n"

#: build/pack.c:306
#, c-format
msgid "readRPM: open %s: %s\n"
msgstr "readRPM：開啟 %s：%s\n"

#: build/pack.c:316
#, c-format
msgid "readRPM: read %s: %s\n"
msgstr "readRPM：讀取 %s：%s\n"

#: build/pack.c:325 build/pack.c:656
#, c-format
msgid "%s: Fseek failed: %s\n"
msgstr "%s：檢索失敗：%s\n"

#: build/pack.c:357
#, c-format
msgid "readRPM: %s is not an RPM package\n"
msgstr "readRPM：%s 不是一個 RPM 套件。\n"

#: build/pack.c:362
#, c-format
msgid "readRPM: reading header from %s\n"
msgstr "readRPM：正在讀取 %s 的檔案表頭\n"

#: build/pack.c:596
msgid "Unable to create immutable header region.\n"
msgstr "無法建立不可變的表頭區域。\n"

#: build/pack.c:616
msgid "Unable to write temp header\n"
msgstr "無法寫入臨時表頭\n"

#: build/pack.c:626
msgid "Bad CSA data\n"
msgstr "損壞的 CSA 資料\n"

#: build/pack.c:663
msgid "Unable to write final header\n"
msgstr "無法寫入表頭結尾\n"

#: build/pack.c:683
#, c-format
msgid "Generating signature: %d\n"
msgstr "產生簽章：%d\n"

#: build/pack.c:701
msgid "Unable to reload signature header.\n"
msgstr "無法重載簽章表頭。\n"

#: build/pack.c:709
#, c-format
msgid "Could not open %s: %s\n"
msgstr "無法開啟 %s：%s\n"

#: build/pack.c:744 lib/psm.c:1844
#, c-format
msgid "Unable to write package: %s\n"
msgstr "無法寫入套件：%s\n"

#: build/pack.c:759
#, c-format
msgid "Unable to open sigtarget %s: %s\n"
msgstr "無法開啟簽章目標 %s：%s\n"

#: build/pack.c:770
#, c-format
msgid "Unable to read header from %s: %s\n"
msgstr "無法讀取 %s 的表頭：%s\n"

#: build/pack.c:784
#, c-format
msgid "Unable to write header to %s: %s\n"
msgstr "無法寫入 %s 的表頭：%s\n"

#: build/pack.c:794
#, c-format
msgid "Unable to read payload from %s: %s\n"
msgstr "無法從 %s 讀取酬載: %s\n"

#: build/pack.c:800
#, c-format
msgid "Unable to write payload to %s: %s\n"
msgstr "無法寫入酬載到 %s: %s\n"

#: build/pack.c:837 lib/psm.c:2119
#, c-format
msgid "Wrote: %s\n"
msgstr "已寫入：%s\n"

#: build/pack.c:905
#, c-format
msgid "Could not generate output filename for package %s: %s\n"
msgstr "無法產生套件 %s 的檔案名稱輸出：%s\n"

#: build/pack.c:922
#, c-format
msgid "cannot create %s: %s\n"
msgstr "無法建立 %s：%s\n"

#: build/parseBuildInstallClean.c:36
#, c-format
msgid "line %d: second %s\n"
msgstr "列 %d：重複的 %s\n"

#: build/parseChangelog.c:151
#, c-format
msgid "%%changelog entries must start with *\n"
msgstr "%%changelog 條目必須以「*」符號開頭\n"

#: build/parseChangelog.c:159
#, c-format
msgid "incomplete %%changelog entry\n"
msgstr "不完整的 %%changelog 條目\n"

#: build/parseChangelog.c:176
#, c-format
msgid "bad date in %%changelog: %s\n"
msgstr "%%changelog 中含有不正確的日期描述：%s\n"

#: build/parseChangelog.c:181
#, c-format
msgid "%%changelog not in descending chronological order\n"
msgstr "%%changelog 無法繼承年代順序的描述。\n"

#: build/parseChangelog.c:189 build/parseChangelog.c:200
#, c-format
msgid "missing name in %%changelog\n"
msgstr "%%changelog 中漏失了名稱\n"

#: build/parseChangelog.c:207
#, c-format
msgid "no description in %%changelog\n"
msgstr "%%changelog 中沒有更新說明\n"

#: build/parseDescription.c:47
#, c-format
msgid "line %d: Error parsing %%description: %s\n"
msgstr "列 %d：解析 %%description 時發生錯誤：%s\n"

#: build/parseDescription.c:60 build/parseFiles.c:56 build/parseScript.c:232
#, c-format
msgid "line %d: Bad option %s: %s\n"
msgstr "列 %d：損壞的選項 %s：%s\n"

#: build/parseDescription.c:71 build/parseFiles.c:70 build/parseScript.c:246
#, c-format
msgid "line %d: Too many names: %s\n"
msgstr "列 %d: 太多名稱：%s\n"

#: build/parseDescription.c:79 build/parseFiles.c:79 build/parseScript.c:255
#, c-format
msgid "line %d: Package does not exist: %s\n"
msgstr "列 %d：套件不存在：%s\n"

#: build/parseDescription.c:89
#, c-format
msgid "line %d: Second description\n"
msgstr "列 %d：重複的 description\n"

#: build/parseFiles.c:42
#, c-format
msgid "line %d: Error parsing %%files: %s\n"
msgstr "列 %d：解析 %%files 時發生錯誤：%s\n"

#: build/parseFiles.c:86
#, c-format
msgid "line %d: Second %%files list\n"
msgstr "列 %d：重複的 %%files 清單\n"

#: build/parsePreamble.c:243
#, c-format
msgid "Architecture is excluded: %s\n"
msgstr "已被排除的架構：%s\n"

#: build/parsePreamble.c:247
#, c-format
msgid "Architecture is not included: %s\n"
msgstr "未被包含的架構：%s\n"

#: build/parsePreamble.c:251
#, c-format
msgid "OS is excluded: %s\n"
msgstr "已被排除的作業系統：%s\n"

#: build/parsePreamble.c:255
#, c-format
msgid "OS is not included: %s\n"
msgstr "未被包含的作業系統：%s\n"

#: build/parsePreamble.c:281
#, c-format
msgid "%s field must be present in package: %s\n"
msgstr "必須在目前套件中宣告 %s 欄位：%s\n"

#: build/parsePreamble.c:310
#, c-format
msgid "Duplicate %s entries in package: %s\n"
msgstr "套件中有重複的 %s 條目：%s\n"

#: build/parsePreamble.c:376
msgid "No icon file in sources\n"
msgstr "原始碼中沒有圖示檔案\n"

#: build/parsePreamble.c:393
#, c-format
msgid "Invalid icon URL: %s\n"
msgstr "無效的圖示 URL：%s\n"

#: build/parsePreamble.c:400
#, c-format
msgid "Unable to open icon %s: %s\n"
msgstr "無法開啟圖示 %s：%s\n"

#: build/parsePreamble.c:409
#, c-format
msgid "Unable to read icon %s: %s\n"
msgstr "無法讀取圖示 %s：%s\n"

#: build/parsePreamble.c:414
#, c-format
msgid "Icon %s is too big (max. %d bytes)\n"
msgstr "圖示 %s 太大 (最大 %d 位元組)\n"

#: build/parsePreamble.c:424
#, c-format
msgid "Unknown icon type: %s\n"
msgstr "不明的圖示類型：%s\n"

#: build/parsePreamble.c:472
#, c-format
msgid "line %d: Tag takes single token only: %s\n"
msgstr "列 %d: 標記只需單一符記：%s\n"

#: build/parsePreamble.c:512
#, c-format
msgid "line %d: Malformed tag: %s\n"
msgstr "列 %d: 異常的標記：%s\n"

#: build/parsePreamble.c:520
#, c-format
msgid "line %d: Empty tag: %s\n"
msgstr "列 %d: 清空標記：%s\n"

#: build/parsePreamble.c:544 build/parsePreamble.c:551
#, c-format
msgid "line %d: Illegal char '-' in %s: %s\n"
msgstr "列 %d：在 %s 中出現違規字元「-」：%s\n"

#: build/parsePreamble.c:584
#, c-format
msgid "BuildRoot can not be \"/\": %s\n"
msgstr "BuildRoot 不能是「/」：%s\n"

#: build/parsePreamble.c:600
#, c-format
msgid "line %d: Prefixes must begin with \"/\": %s\n"
msgstr "列 %d：前綴必須以「/」開始：%s\n"

#: build/parsePreamble.c:608
#, c-format
msgid "line %d: Prefixes must not end with \"/\": %s\n"
msgstr "列 %d：Prefixes 不能以「/」結尾：%s\n"

#: build/parsePreamble.c:620
#, c-format
msgid "line %d: Docdir must begin with '/': %s\n"
msgstr "列 %d：Docdir 必須以「/」開頭：%s\n"

#: build/parsePreamble.c:634
#, c-format
msgid "line %d: %s takes an integer value: %s\n"
msgstr "列 %d：%s 需要一個整數值：%s\n"

#: build/parsePreamble.c:676 build/parsePreamble.c:687
#, c-format
msgid "line %d: Bad %s: qualifiers: %s\n"
msgstr "列 %d: 不當的 %s: 限定詞：%s\n"

#: build/parsePreamble.c:731
#, c-format
msgid "line %d: Bad BuildArchitecture format: %s\n"
msgstr "列 %d：損壞的組建架構格式：%s\n"

#: build/parsePreamble.c:740
#, c-format
msgid "Internal error: Bogus tag %d\n"
msgstr "內部錯誤：假造的標記 %d\n"

#: build/parsePreamble.c:844
#, c-format
msgid "Legacy syntax is unsupported: %s\n"
msgstr "不支援舊語法：%s\n"

#: build/parsePreamble.c:913
#, c-format
msgid "Bad package specification: %s\n"
msgstr "不當的套件規格：%s\n"

#: build/parsePreamble.c:919
#, c-format
msgid "Package already exists: %s\n"
msgstr "套件已存在：%s\n"

#: build/parsePreamble.c:948
#, c-format
msgid "line %d: Unknown tag: %s\n"
msgstr "列 %d：不明標記：%s\n"

#: build/parsePrep.c:45
#, c-format
msgid "Bad source: %s: %s\n"
msgstr "損壞的原始碼檔案：%s：%s\n"

#: build/parsePrep.c:101
#, c-format
msgid "No patch number %d\n"
msgstr "編號為 %d 的修補不存在\n"

#: build/parsePrep.c:200
#, c-format
msgid "No source number %d\n"
msgstr "編號為 %d 的原始碼檔案不存在\n"

#: build/parsePrep.c:316
#, c-format
msgid "Error parsing %%setup: %s\n"
msgstr "解析 %%setup 時發生錯誤：%s\n"

#: build/parsePrep.c:331
#, c-format
msgid "line %d: Bad arg to %%setup: %s\n"
msgstr "列 %d：%%setup 中出現錯誤的引數：%s\n"

#: build/parsePrep.c:349
#, c-format
msgid "line %d: Bad %%setup option %s: %s\n"
msgstr "列 %d：%%setup 中出現錯誤的選項 %s：%s\n"

#: build/parsePrep.c:491
#, c-format
msgid "line %d: Need arg to %%patch -b: %s\n"
msgstr "列 %d：%%patch -b 需要引數：%s\n"

#: build/parsePrep.c:500
#, c-format
msgid "line %d: Need arg to %%patch -z: %s\n"
msgstr "列 %d：%%patch -z 需要引數：%s\n"

#: build/parsePrep.c:512
#, c-format
msgid "line %d: Need arg to %%patch -p: %s\n"
msgstr "列 %d：%%patch -p 需要引數：%s\n"

#: build/parsePrep.c:519
#, c-format
msgid "line %d: Bad arg to %%patch -p: %s\n"
msgstr "列 %d：%%patch -p 的引數錯誤：%s\n"

#: build/parsePrep.c:526
msgid "Too many patches!\n"
msgstr "修補過多！\n"

#: build/parsePrep.c:530
#, c-format
msgid "line %d: Bad arg to %%patch: %s\n"
msgstr "列 %d：%%patch 的引數錯誤：%s\n"

#: build/parsePrep.c:624
#, c-format
msgid "Missing %s%d %s: %s\n"
msgstr "缺少 %s%d %s：%s\n"

#: build/parsePrep.c:632
#, c-format
msgid "file %s missing: %s\n"
msgstr "檔案 %s 缺少：%s\n"

#: build/parsePrep.c:640
#, c-format
msgid "Fetching %s failed: %s\n"
msgstr "擷取 %s 時失敗：%s\n"

#: build/parsePrep.c:662
#, c-format
msgid "line %d: second %%prep\n"
msgstr "列 %d：重複的 %%prep\n"

#: build/parseReqs.c:101
#, c-format
msgid "line %d: Dependency \"%s\" must begin with alpha-numeric, '_' or '/': %s\n"
msgstr "列 %d：相依性「%s」必須以文數字、「_」或「/」開始：%s\n"

#: build/parseReqs.c:125
#, c-format
msgid "line %d: Versioned file name not permitted: %s\n"
msgstr "列 %d: 不容許標上版本的檔案名稱：%s\n"

#: build/parseReqs.c:143
#, c-format
msgid "line %d: Version required: %s\n"
msgstr "列 %d：需要版本描述：%s\n"

#: build/parseScript.c:188
#, c-format
msgid "line %d: triggers must have --: %s\n"
msgstr "列 %d：觸發器必須包含「--」：%s\n"

#: build/parseScript.c:198 build/parseScript.c:271
#, c-format
msgid "line %d: Error parsing %s: %s\n"
msgstr "列 %d：解析 %s 時發生錯誤：%s\n"

#: build/parseScript.c:210
#, c-format
msgid "line %d: internal script must end with '>': %s\n"
msgstr "列 %d：內建命令稿必須以「>」結尾：%s\n"

#: build/parseScript.c:219
#, c-format
msgid "line %d: script program must begin with '/': %s\n"
msgstr "列 %d：命令稿程式必須以「/」開頭：%s\n"

#: build/parseScript.c:263
#, c-format
msgid "line %d: Second %s\n"
msgstr "列 %d：重複的 %s\n"

#: build/parseScript.c:309
#, c-format
msgid "line %d: unsupported internal script: %s\n"
msgstr "列 %d：不支援的內建命令稿：%s\n"

#: build/parseSpec.c:202
#, c-format
msgid "line %d: %s\n"
msgstr "列 %d：%s\n"

#: build/parseSpec.c:254
#, c-format
msgid "Unable to open %s: %s\n"
msgstr "無法開啟 %s：%s\n"

#: build/parseSpec.c:270
#, c-format
msgid "Unclosed %%if\n"
msgstr "%%if 分支未關閉\n"

#: build/parseSpec.c:340
#, c-format
msgid "%s:%d: parseExpressionBoolean returns %d\n"
msgstr "%s:%d: parseExpressionBoolean 回傳 %d\n"

#: build/parseSpec.c:349
#, c-format
msgid "%s:%d: Got a %%else with no %%if\n"
msgstr "%s:%d：缺少與 %%if 對應的 %%if\n"

#: build/parseSpec.c:361
#, c-format
msgid "%s:%d: Got a %%endif with no %%if\n"
msgstr "%s:%d：缺少與 %%endif 對應的 %%if\n"

#: build/parseSpec.c:375 build/parseSpec.c:384
#, c-format
msgid "malformed %%include statement\n"
msgstr "異常的 %%include 宣告\n"

#: build/parseSpec.c:564
msgid "No compatible architectures found for build\n"
msgstr "沒有可供組建的相容硬體架構\n"

#: build/parseSpec.c:605
#, c-format
msgid "Package has no %%description: %s\n"
msgstr "套件沒有 %%description：%s\n"

#: build/poptBT.c:142
#, c-format
msgid "build through %prep (unpack sources and apply patches) from <specfile>"
msgstr "從 <規格檔> 透過 %prep (解壓原始碼和套用修補程式) 來組建"

#: build/poptBT.c:143 build/poptBT.c:146 build/poptBT.c:149 build/poptBT.c:152
#: build/poptBT.c:155 build/poptBT.c:158 build/poptBT.c:161
msgid "<specfile>"
msgstr "<規格檔>"

#: build/poptBT.c:145
msgid "build through %build (%prep, then compile) from <specfile>"
msgstr "從 <規格檔> 透過 %build (%prep，然後編譯) 來組建"

#: build/poptBT.c:148
msgid "build through %install (%prep, %build, then install) from <specfile>"
msgstr "從 <規格檔> 透過 %install (%prep，%build，然後安裝) 來組建"

#: build/poptBT.c:151
#, c-format
msgid "verify %files section from <specfile>"
msgstr "從 <規格檔> 驗證 %files 區段"

#: build/poptBT.c:154
msgid "build source and binary packages from <specfile>"
msgstr "根據 <規格檔案> 組建原始碼套件與二進位套件"

#: build/poptBT.c:157
msgid "build binary package only from <specfile>"
msgstr "根據 <規格檔案> 只組建二進位套件"

#: build/poptBT.c:160
msgid "build source package only from <specfile>"
msgstr "根據 <規格檔案> 只組建原始碼套件"

#: build/poptBT.c:164
#, c-format
msgid "build through %prep (unpack sources and apply patches) from <tarball>"
msgstr "從 <打包檔> 透過 %prep (解壓原始碼和套用修補程式) 來組建"

#: build/poptBT.c:165 build/poptBT.c:168 build/poptBT.c:171 build/poptBT.c:174
#: build/poptBT.c:177 build/poptBT.c:180 build/poptBT.c:183
msgid "<tarball>"
msgstr "<tarball>"

#: build/poptBT.c:167
msgid "build through %build (%prep, then compile) from <tarball>"
msgstr "從 <打包檔> 透過 %build (%prep，然後編譯) 來組建"

#: build/poptBT.c:170
msgid "build through %install (%prep, %build, then install) from <tarball>"
msgstr "從 <打包檔> 透過 %install (%prep，%build，然後安裝) 來組建"

#: build/poptBT.c:173
#, c-format
msgid "verify %files section from <tarball>"
msgstr "從 <打包檔> 驗證 %files 區段"

#: build/poptBT.c:176
msgid "build source and binary packages from <tarball>"
msgstr "從 <tarball> 中組建原始碼套件與二進位套件"

#: build/poptBT.c:179
msgid "build binary package only from <tarball>"
msgstr "從 <tarball> 中只組建二進位套件"

#: build/poptBT.c:182
msgid "build source package only from <tarball>"
msgstr "從 <tarball> 中只組建原始碼套件"

#: build/poptBT.c:186
msgid "build binary package from <source package>"
msgstr "從 <原始碼套件> 中組建二進位套件"

#: build/poptBT.c:187 build/poptBT.c:190
msgid "<source package>"
msgstr "<原始碼套件>"

#: build/poptBT.c:189
msgid "build through %install (%prep, %build, then install) from <source package>"
msgstr "從 <原始碼套件> 透過 %install (%prep，%build，然後安裝) 來組建"

#: build/poptBT.c:193
msgid "remove build tree when done"
msgstr "完成後移除組建目錄樹"

#: build/poptBT.c:195
msgid "ignore ExcludeArch: directives from spec file"
msgstr "忽略 ExcludeArch：根據規格檔案的指示"

#: build/poptBT.c:197
msgid "debug file state machine"
msgstr "除錯檔案狀態機器"

#: build/poptBT.c:199
msgid "do not execute any stages of the build"
msgstr "不執行組建程序裡的任何步驟"

#: build/poptBT.c:201
msgid "do not verify build dependencies"
msgstr "不校驗組建相依關係"

#: build/poptBT.c:204 lib/poptALL.c:374 lib/poptI.c:355 lib/poptQV.c:415
#: lib/poptQV.c:424 lib/poptQV.c:466
msgid "don't verify package digest(s)"
msgstr "不校驗套件摘要"

#: build/poptBT.c:206 lib/poptALL.c:376 lib/poptI.c:357 lib/poptQV.c:418
#: lib/poptQV.c:426 lib/poptQV.c:469
msgid "don't verify database header(s) when retrieved"
msgstr "取回時不驗證資料庫表頭"

#: build/poptBT.c:208 lib/poptALL.c:382 lib/poptI.c:359 lib/poptQV.c:421
#: lib/poptQV.c:428 lib/poptQV.c:471
msgid "don't verify package signature(s)"
msgstr "不校驗套件簽章"

#: build/poptBT.c:211
msgid "do not accept i18N msgstr's from specfile"
msgstr "不接受來自規格檔的 i18N msgstr"

#: build/poptBT.c:213
msgid "remove sources when done"
msgstr "完成後移除原始碼檔案"

#: build/poptBT.c:215
msgid "remove specfile when done"
msgstr "完成後移除規格檔案"

#: build/poptBT.c:217
msgid "skip straight to specified stage (only for c,i)"
msgstr "直接跳到指定的階段 (只有用於 c,i)"

#: build/poptBT.c:219
msgid "generate PGP/GPG signature"
msgstr "產生 PGP/GPG 簽章"

#: build/poptBT.c:221
msgid "override target platform"
msgstr "無視目標平臺"

#: build/poptBT.c:221 lib/poptALL.c:371 lib/poptQV.c:326
msgid "CPU-VENDOR-OS"
msgstr "CPU-VENDOR-OS"

#: build/poptBT.c:223
msgid "lookup i18N strings in specfile catalog"
msgstr "在規格檔目錄中查找 i18N 字串"

#: build/spec.c:235
#, c-format
msgid "line %d: Bad number: %s\n"
msgstr "列 %d：錯誤的編號：%s\n"

#: build/spec.c:241
#, c-format
msgid "line %d: Bad no%s number: %d\n"
msgstr "列 %d: 不當的 no%s 數字：%d\n"

#: build/spec.c:310
#, c-format
msgid "line %d: Bad %s number: %s\n"
msgstr "列 %d: 不當的 %s 數字：%s\n"

#: build/spec.c:634
#, c-format
msgid "can't query %s: %s\n"
msgstr "無法查詢 %s：%s\n"

#: build/spec.c:718
#, c-format
msgid "query of specfile %s failed, can't parse\n"
msgstr "規格檔 %s 的查詢失敗，無法剖析\n"

#: build/spec.c:774
#, c-format
msgid "Query specfile for platform(s): %s\n"
msgstr "查詢的規格檔用於平臺：%s\n"

#: lib/cpio.c:248
#, c-format
msgid "(error 0x%x)"
msgstr "(錯誤 0x%x)"

#: lib/cpio.c:251
msgid "Bad magic"
msgstr "不當的魔法數字"

#: lib/cpio.c:252
msgid "Bad/unreadable  header"
msgstr "損壞或無法讀取的表頭"

#: lib/cpio.c:274
msgid "Header size too big"
msgstr "表頭尺寸過大"

#: lib/cpio.c:275
msgid "Unknown file type"
msgstr "不明的檔案類型"

#: lib/cpio.c:276
msgid "Missing hard link(s)"
msgstr "丟失的硬式鏈結"

#: lib/cpio.c:277
msgid "File digest mismatch"
msgstr "檔案摘要不符合"

#: lib/cpio.c:278
msgid "Internal error"
msgstr "內部錯誤"

#: lib/cpio.c:279
msgid "Archive file not in header"
msgstr "在檔頭中沒有歸檔檔案"

#: lib/cpio.c:292
msgid " failed - "
msgstr " 失敗 - "

#: lib/depends.c:299
#, c-format
msgid "package %s was already added, skipping %s\n"
msgstr "套件 %s 已被加入，忽略 %s\n"

#: lib/depends.c:313
#, c-format
msgid "package %s was already added, replacing with %s\n"
msgstr "套件 %s 已被加入，替換 %s\n"

#: lib/depends.c:420
#, c-format
msgid "   upgrade erases %s\n"
msgstr "   升級清除 %s\n"

#: lib/depends.c:490
#, c-format
msgid "  Obsoletes: %s\t\terases %s\n"
msgstr "  過時的：%s\t\t清除 %s\n"

#: lib/depends.c:591
msgid "(cached)"
msgstr "(快取)"

#: lib/depends.c:606
msgid "(function probe)"
msgstr "(函式探查)"

#: lib/depends.c:625
msgid "(user lookup)"
msgstr "(使用者查找)"

#: lib/depends.c:642
msgid "(group lookup)"
msgstr "(群組查找)"

#: lib/depends.c:651
msgid "(access probe)"
msgstr "(存取探查)"

#: lib/depends.c:673
msgid "(mtab probe)"
msgstr "(mtab 探查)"

#: lib/depends.c:728
msgid "(diskspace probe)"
msgstr "(磁碟空間探查)"

#: lib/depends.c:758
msgid "(digest probe)"
msgstr "(摘要探查)"

#: lib/depends.c:771
msgid "(gnupg probe)"
msgstr "(gnupg 探查)"

#: lib/depends.c:784
msgid "(macro probe)"
msgstr "(巨集探查)"

#: lib/depends.c:812
msgid "(envvar probe)"
msgstr "(環境變數探查)"

#: lib/depends.c:839
msgid "(running probe)"
msgstr "(運行探查)"

#: lib/depends.c:852
msgid "(sysinfo provides)"
msgstr "(系統資訊提供)"

#: lib/depends.c:872
msgid "(rpmlib provides)"
msgstr "(rpmlib 提供)"

#: lib/depends.c:888
msgid "(cpuinfo provides)"
msgstr "(cpuinfo 提供)"

#: lib/depends.c:904
msgid "(getconf provides)"
msgstr "(getconf 提供)"

#: lib/depends.c:920
msgid "(uname provides)"
msgstr "(uname 提供)"

#: lib/depends.c:952
msgid "(soname provides)"
msgstr "(soname 提供)"

#: lib/depends.c:979
msgid "(db files)"
msgstr "(資料庫檔案)"

#: lib/depends.c:992
msgid "(db provides)"
msgstr "(資料庫提供)"

#: lib/depends.c:1022
msgid "(hint skipped)"
msgstr "(提示略過)"

#: lib/depends.c:1476
#, c-format
msgid "ignore package name relation(s) [%d]\t%s -> %s\n"
msgstr "忽略套件名稱關聯 [%d]\t%s -> %s\n"

#: lib/depends.c:1604
#, c-format
msgid "removing %s \"%s\" from tsort relations.\n"
msgstr "從樹狀排列關係移除 %s「%s」。\n"

#: lib/depends.c:1880
msgid "========== recording tsort relations\n"
msgstr "========== 記錄樹狀排列關係\n"

#: lib/depends.c:2001
msgid "========== tsorting packages (order, #predecessors, #succesors, tree, Ldepth, Rbreadth)\n"
msgstr "========== 樹狀排列套件 (次序、#前行者、#後繼者、樹、深度、寬度)\n"

#: lib/depends.c:2092
#, c-format
msgid "========== successors only (%d bytes)\n"
msgstr "========== 只有後繼者 (%d 位元組)\n"

#: lib/depends.c:2165
msgid "LOOP:\n"
msgstr "迴圈：\n"

#: lib/depends.c:2196
msgid "========== continuing tsort ...\n"
msgstr "========== 繼續樹狀排列…\n"

#: lib/depends.c:2201
#, c-format
msgid "rpmtsOrder failed, %d elements remain\n"
msgstr "rpmtsOrder 失敗，剩下 %d 個元件\n"

#: lib/formats.c:44 lib/formats.c:76 lib/formats.c:111 lib/formats.c:189
#: lib/formats.c:780
msgid "(invalid type)"
msgstr "(無效型態)"

#: lib/formats.c:178
msgid "(not base64)"
msgstr "(不是 base64)"

#: lib/formats.c:214 lib/formats.c:668
msgid "(not a blob)"
msgstr "(不是 blob)"

#: lib/formats.c:370
msgid "(invalid xml type)"
msgstr "(無效的 xml 型態)"

#: lib/formats.c:584
msgid "(invalid yaml type)"
msgstr "(無效的 yaml 型態)"

#: lib/formats.c:693
msgid "(not an OpenPGP signature)"
msgstr "(不是一個 OpenPGP 簽章)"

#: lib/fs.c:80
#, c-format
msgid "mntctl() failed to return size: %s\n"
msgstr "mntctl() 回傳大小失敗：%s\n"

#: lib/fs.c:95
#, c-format
msgid "mntctl() failed to return mount points: %s\n"
msgstr "mntctl() 回傳掛載點失敗：%s\n"

#: lib/fs.c:115 lib/fs.c:218 lib/fs.c:342
#, c-format
msgid "failed to stat %s: %s\n"
msgstr "無法檢驗狀態：%s：%s\n"

#: lib/fs.c:160 rpmio/url.c:556
#, c-format
msgid "failed to open %s: %s\n"
msgstr "開啟 %s 失敗：%s\n"

#: lib/fs.c:240
#, c-format
msgid "%5d 0x%04x %s %s\n"
msgstr "%5d 0x%04x %s %s\n"

#: lib/fs.c:365
#, c-format
msgid "file %s is on an unknown device\n"
msgstr "檔案 %s 位於一個不明的裝置上\n"

#: lib/fsm.c:358
msgid "========== Directories not explicitly included in package:\n"
msgstr "========== 未被明確包含在套件內的目錄：\n"

#: lib/fsm.c:361
#, c-format
msgid "%10d %s\n"
msgstr "%10d %s\n"

#: lib/fsm.c:805
#, c-format
msgid "user %s does not exist - using root\n"
msgstr "使用者 %s 不存在 - 現使用 root 代替\n"

#: lib/fsm.c:813
#, c-format
msgid "group %s does not exist - using root\n"
msgstr "使用者群組 %s 不存在 - 現使用 root 代替\n"

#: lib/fsm.c:1416
#, c-format
msgid "%s directory created with perms %04o, no context.\n"
msgstr "建立的 %s 目錄附有 perms %04o, 無上下文。\n"

#: lib/fsm.c:1420
#, c-format
msgid "%s directory created with perms %04o, context %s.\n"
msgstr "建立的 %s 目錄附有 perms %04o, 上下文 %s。\n"

#: lib/fsm.c:1729
#, c-format
msgid "archive file %s was not found in header file list\n"
msgstr "保存檔案 %s 在檔案清單表頭中找不到\n"

#: lib/fsm.c:1879 lib/fsm.c:2003
#, c-format
msgid "%s saved as %s\n"
msgstr "%s 已被另存為 %s\n"

#: lib/fsm.c:2030
#, c-format
msgid "%s rmdir of %s failed: Directory not empty\n"
msgstr "%s 移除目錄 %s 失敗：目錄非空\n"

#: lib/fsm.c:2036
#, c-format
msgid "%s rmdir of %s failed: %s\n"
msgstr "%s 移除目錄 %s 失敗：%s\n"

#: lib/fsm.c:2051
#, c-format
msgid " %s: unlink of %s failed: %s\n"
msgstr " %s：取消 %s 的連結時失敗：%s\n"

#: lib/fsm.c:2076
#, c-format
msgid "%s created as %s\n"
msgstr "%s 如同 %s 而建立\n"

#: lib/manifest.c:152
#, c-format
msgid "adding %d args from manifest.\n"
msgstr "從清單中加入 %d 個引數。\n"

#: lib/misc.c:41
#, c-format
msgid "cannot create %%%s %s\n"
msgstr "無法建立 %%%s %s\n"

#: lib/misc.c:187 lib/misc.c:192 lib/misc.c:198
#, c-format
msgid "error creating temporary file %s\n"
msgstr "建立暫時檔案 %s 時發生錯誤\n"

#: lib/package.c:362
#, c-format
msgid "blob size(%d): BAD, 8 + 16 * il(%d) + dl(%d)\n"
msgstr "blob 大小(%d):不當的， 8 + 16 * il(%d) + dl(%d)\n"

#: lib/package.c:371 lib/package.c:435 lib/package.c:512 lib/signature.c:232
#, c-format
msgid "tag[%d]: BAD, tag %d type %d offset %d count %d\n"
msgstr "標記[%d]:不當的，標記 %d 型態 %d 偏移 %d 計數 %d\n"

#: lib/package.c:391 lib/signature.c:248
#, c-format
msgid "region offset: BAD, tag %d type %d offset %d count %d\n"
msgstr "區域偏移：不當的，標記 %d 型態 %d 偏移 %d 計數 %d\n"

#: lib/package.c:412 lib/signature.c:275
#, c-format
msgid "region trailer: BAD, tag %d type %d offset %d count %d\n"
msgstr "區域結尾：不當的，標記 %d 型態 %d 偏移 %d 計數 %d\n"

#: lib/package.c:426 lib/signature.c:289
#, c-format
msgid "region size: BAD, ril(%d) > il(%d)\n"
msgstr "區域大小：不當的， ril(%d)> il(%d)\n"

#: lib/package.c:454
#, c-format
msgid "hdr SHA1: BAD, not hex\n"
msgstr "hdr SHA1: 不當的，不是十六進位\n"

#: lib/package.c:469
#, c-format
msgid "hdr RSA: BAD, not binary\n"
msgstr "hdr RSA：不當的，並非二進位\n"

#: lib/package.c:481
#, c-format
msgid "hdr DSA: BAD, not binary\n"
msgstr "hdr DSA：不當的，不是二進位\n"

#: lib/package.c:545 lib/package.c:585 lib/package.c:929 lib/package.c:955
#: lib/package.c:987
#, c-format
msgid "only V3 and V4 signatures can be verified, skipping V%u signature\n"
msgstr "只能校驗 V3 與 V4 版本的簽章，現略過 V%u 版本的簽章\n"

#: lib/package.c:673
#, c-format
msgid "hdr size(%d): BAD, read returned %d\n"
msgstr "hdr 大小(%d):不當的，讀取回傳 %d\n"

#: lib/package.c:677
#, c-format
msgid "hdr magic: BAD\n"
msgstr "hdr magic：不當的\n"

#: lib/package.c:685
#, c-format
msgid "hdr tags: BAD, no. of tags(%d) out of range\n"
msgstr "hdr 標記：不當的，標記(%d)的號碼超出範圍\n"

#: lib/package.c:694
#, c-format
msgid "hdr data: BAD, no. of bytes(%d) out of range\n"
msgstr "hdr 資料：不當的，位元組(%d)的號碼超出範圍\n"

#: lib/package.c:708
#, c-format
msgid "hdr blob(%d): BAD, read returned %d\n"
msgstr "hdr blob(%d):不當的，讀取回傳 %d\n"

#: lib/package.c:721
#, c-format
msgid "hdr load: BAD\n"
msgstr "hdr 載入：不當的\n"

#: lib/package.c:799
msgid "packaging version 1 is not supported by this version of RPM\n"
msgstr "此 RPM 版本不支援第 1 版的打包\n"

#: lib/package.c:808
msgid "only packaging with major numbers <= 4 is supported by this version of RPM\n"
msgstr "此 RPM 版本只支援主版本號 <=4 的打包\n"

#: lib/package.c:820 lib/rpmchecksig.c:236 lib/rpmchecksig.c:773
#, c-format
msgid "%s: rpmReadSignature failed: %s"
msgstr "%s：rpmReadSignature 失敗：%s"

#: lib/package.c:827 lib/rpmchecksig.c:243 lib/rpmchecksig.c:781
#, c-format
msgid "%s: No signature available\n"
msgstr "%s：未發現簽章\n"

#: lib/package.c:894
#, c-format
msgid "%s: headerRead failed: %s"
msgstr "%s:：headerRead 失敗：%s"

#: lib/package.c:1002 lib/rpmchecksig.c:118 lib/rpmchecksig.c:689
#, c-format
msgid "%s: Fread failed: %s\n"
msgstr "%s: Fread 失敗：%s\n"

#: lib/poptALL.c:285
msgid "FTS_COMFOLLOW: follow command line symlinks"
msgstr "FTS_COMFOLLOW：跟隨命令列符號連結"

#: lib/poptALL.c:287
msgid "FTS_LOGICAL: logical walk"
msgstr "FTS_LOGICAL：邏輯遍歷"

#: lib/poptALL.c:289
msgid "FTS_NOCHDIR: don't change directories"
msgstr "FTS_NOCHDIR：不變更目錄"

#: lib/poptALL.c:291
msgid "FTS_NOSTAT: don't get stat info"
msgstr "FTS_NOSTAT：不取得狀態資訊"

#: lib/poptALL.c:293
msgid "FTS_PHYSICAL: physical walk"
msgstr "FTS_PHYSICAL：實體遍歷"

#: lib/poptALL.c:295
msgid "FTS_SEEDOT: return dot and dot-dot"
msgstr "FTS_SEEDOT：回傳 . 和 .."

#: lib/poptALL.c:297
msgid "FTS_XDEV: don't cross devices"
msgstr "FTS_XDEV：不交叉裝置"

#: lib/poptALL.c:299
msgid "FTS_WHITEOUT: return whiteout information"
msgstr "FTS_WHITEOUT：回傳空白化資訊"

#: lib/poptALL.c:309 lib/poptI.c:221 lib/poptQV.c:296 lib/poptQV.c:343
msgid "add suggested packages to transaction"
msgstr "加入建議的套件到異動作業"

#: lib/poptALL.c:312 lib/poptI.c:224
msgid "use anaconda \"presentation order\""
msgstr "使用 anaconda\"簡報順序\""

#: lib/poptALL.c:315 lib/poptI.c:227
msgid "print dependency loops as warning"
msgstr "印出循環的相依關係做為警告"

#: lib/poptALL.c:318 lib/poptI.c:230
msgid "do not suggest missing dependency resolution(s)"
msgstr "不給出相依性解決方案的建議"

#: lib/poptALL.c:321 lib/poptI.c:233
msgid "do not check added package conflicts"
msgstr "不檢查已加入套件間衝突"

#: lib/poptALL.c:324 lib/poptI.c:236
msgid "ignore added package requires on symlink targets"
msgstr "忽略已加入套件對於符號連結目標需求"

#: lib/poptALL.c:327 lib/poptI.c:239
msgid "ignore added package obsoletes"
msgstr "忽略已加入套件的淘汰名稱"

#: lib/poptALL.c:330 lib/poptI.c:242
msgid "ignore added package requires on file parent directory"
msgstr "忽略已加入套件對於上層目錄檔案的需求"

#: lib/poptALL.c:333 lib/poptI.c:245
msgid "do not check added package requires"
msgstr "不檢查已加入套件的需求"

#: lib/poptALL.c:336 lib/poptI.c:248
msgid "ignore added package upgrades"
msgstr "忽略已加入套件的升級"

#: lib/poptALL.c:359
msgid "predefine MACRO with value EXPR"
msgstr "預先以值 EXPR 定義巨集"

#: lib/poptALL.c:360 lib/poptALL.c:363
msgid "'MACRO EXPR'"
msgstr "「巨集 EXPR」"

#: lib/poptALL.c:362
msgid "define MACRO with value EXPR"
msgstr "定義巨集附有值 EXPR"

#: lib/poptALL.c:365
msgid "print macro expansion of EXPR"
msgstr "印出巨集展開的 EXPR"

#: lib/poptALL.c:366
msgid "'EXPR'"
msgstr "「EXPR」"

#: lib/poptALL.c:368 lib/poptALL.c:389 lib/poptALL.c:393
msgid "read <FILE:...> instead of default file(s)"
msgstr "讀取 <檔案:...> 以代替預設檔案"

#: lib/poptALL.c:369 lib/poptALL.c:390 lib/poptALL.c:394
msgid "<FILE:...>"
msgstr "<檔案:…>"

#: lib/poptALL.c:371 lib/poptQV.c:326
msgid "specify target platform"
msgstr "指定目標平臺"

#: lib/poptALL.c:379 lib/poptALL.c:413
msgid "disable use of libio(3) API"
msgstr "停止使用 libio(3) API"

#: lib/poptALL.c:385
msgid "send stdout to CMD"
msgstr "發送標準輸出到 CMD"

#: lib/poptALL.c:386
msgid "CMD"
msgstr "CMD"

#: lib/poptALL.c:397
msgid "use ROOT as top level directory"
msgstr "使用 ROOT 做為頂層目錄"

#: lib/poptALL.c:398
msgid "ROOT"
msgstr "ROOT"

#: lib/poptALL.c:401
msgid "display known query tags"
msgstr "顯示已知的查詢標記"

#: lib/poptALL.c:403
msgid "display final rpmrc and macro configuration"
msgstr "顯示完整的 rpmrc 與巨集定義配置"

#: lib/poptALL.c:405
msgid "provide less detailed output"
msgstr "提供較少的細節輸出"

#: lib/poptALL.c:407
msgid "provide more detailed output"
msgstr "提供較多的細節輸出"

#: lib/poptALL.c:409
msgid "print the version of rpm being used"
msgstr "印出正在使用的 rpm 版本資訊"

#: lib/poptALL.c:420
msgid "debug cpio payloads"
msgstr "對 cpio 酬載除錯"

#: lib/poptALL.c:424
msgid "debug payload file state machine"
msgstr "對酬載檔案狀態機器除錯"

#: lib/poptALL.c:426
msgid "use threads for file state machine"
msgstr "使用執行緒做為檔案狀態機器"

#: lib/poptALL.c:428
msgid "debug FTP/HTTP data stream"
msgstr "對 FTP/HTTP 資料流除錯"

#: lib/poptALL.c:430
msgid "debug argv collections"
msgstr "對 argv 收集除錯"

#: lib/poptALL.c:432
msgid "debug WebDAV data stream"
msgstr "對 WebDAV 資料串流除錯"

#: lib/poptALL.c:439
msgid "debug option/argument processing"
msgstr "對選項/引數處理除錯"

#: lib/poptALL.c:444
msgid "debug package state machine"
msgstr "對套件狀態機器除錯"

#: lib/poptALL.c:446
msgid "use threads for package state machine"
msgstr "使用執行緒用於套件狀態機"

#: lib/poptALL.c:460
msgid "debug rpmio I/O"
msgstr "對 rpmio I/O 除錯"

#: lib/poptALL.c:472
msgid "debug tar payloads"
msgstr "對 tar 酬載除錯"

#: lib/poptALL.c:476
msgid "debug URL cache handling"
msgstr "對網址快取處理除錯"

#: lib/poptALL.c:561
#, c-format
msgid "%s: option table misconfigured (%d)\n"
msgstr "%s: 選項表格 misconfigured(%d)\n"

#: lib/poptI.c:71
msgid "exclude paths must begin with a /"
msgstr "被排除的路徑必須以「/」開頭"

#: lib/poptI.c:85
msgid "Option --relocate needs /old/path=/new/path argument"
msgstr "選項 --relocate 需要 /old/path=/new/path 引數"

#: lib/poptI.c:87
msgid "relocations must begin with a /"
msgstr "重新部署引數必須以「/」開頭"

#: lib/poptI.c:90
msgid "relocations must contain a ="
msgstr "重新部署引數必須包含一個「=」"

#: lib/poptI.c:93
msgid "relocations must have a / following the ="
msgstr "重新部署引數中必須有一個在「=」後的「/」"

#: lib/poptI.c:111
msgid "Option --rbexclude needs transaction id argument(s)"
msgstr "選項 --rbexclude 需要異動作業識別號引數"

#: lib/poptI.c:142
msgid "Option --rollback needs a time/date stamp argument"
msgstr "選項 --rollback 需要時間/日期戳記引數"

#: lib/poptI.c:146
#, c-format
msgid "Rollback goal:  %-24.24s (0x%08x)\n"
msgstr "回溯目的： %-24.24s (0x%08x)\n"

#: lib/poptI.c:150
msgid "malformed rollback time/date stamp argument"
msgstr "異常的回溯時間/日期戳記引數"

#: lib/poptI.c:157
msgid "arbgoal takes a time/date stamp argument"
msgstr "arbgoal 需要時間/日期戳記引數"

#: lib/poptI.c:164
msgid "malformed arbgoal time/date stamp argument"
msgstr "異常的 arbgoal 時間/日期戳記引數"

#: lib/poptI.c:253
msgid "install all files, even configurations which might otherwise be skipped"
msgstr "安裝所有檔案，即使配置檔案可能會被略過"

#: lib/poptI.c:257
msgid "remove all packages which match <package> (normally an error is generated if <package> specified multiple packages)"
msgstr "移除所有匹配<套件>的套件 (如果<套件>被指定為多個套件，常會導致錯誤出現)"

#: lib/poptI.c:263 lib/poptI.c:339
msgid "do not execute package scriptlet(s)"
msgstr "不執行套件內建短命令稿"

#: lib/poptI.c:267
msgid "relocate files in non-relocatable package"
msgstr "在不可重新部署套件中重新部署檔案"

#: lib/poptI.c:271
msgid "save erased package files by renaming into sub-directory"
msgstr "將清除的套件內的檔案重新命名後轉移到一個子目錄中"

#: lib/poptI.c:274
msgid "erase (uninstall) package"
msgstr "清除(反安裝)套件"

#: lib/poptI.c:274
msgid "<package>+"
msgstr "<套件>+"

#: lib/poptI.c:277 lib/poptI.c:319
msgid "do not install configuration files"
msgstr "不安裝配置檔案"

#: lib/poptI.c:280 lib/poptI.c:324
msgid "do not install documentation"
msgstr "不安裝文件"

#: lib/poptI.c:282
msgid "skip files with leading component <path> "
msgstr "略過指定的 <路徑> 後的檔案 "

#: lib/poptI.c:283
msgid "<path>"
msgstr "<路徑>"

#: lib/poptI.c:287
msgid "detect file conflicts between packages"
msgstr "在套件之間偵測會衝突的檔案"

#: lib/poptI.c:289
msgid "short hand for --replacepkgs --replacefiles"
msgstr "--replacepkgs 與 --replacefiles 的速寫"

#: lib/poptI.c:293
msgid "upgrade package(s) if already installed"
msgstr "如果套件已安裝，執行更新"

#: lib/poptI.c:294 lib/poptI.c:312 lib/poptI.c:412
msgid "<packagefile>+"
msgstr "<套件檔案>+"

#: lib/poptI.c:296
msgid "print hash marks as package installs (good with -v)"
msgstr "印出出安裝套件的 Hash 碼 (常和 -v 同時使用)"

#: lib/poptI.c:300
msgid "don't verify package architecture"
msgstr "不偵測套件的相容架構"

#: lib/poptI.c:303
msgid "don't verify package operating system"
msgstr "不偵測套件的相容作業系統"

#: lib/poptI.c:307
msgid "don't check disk space before installing"
msgstr "安裝前不偵測磁碟剩餘空間"

#: lib/poptI.c:309
msgid "install documentation"
msgstr "安裝文件"

#: lib/poptI.c:312
msgid "install package(s)"
msgstr "安裝套件"

#: lib/poptI.c:315
msgid "update the database, but do not modify the filesystem"
msgstr "僅更新資料庫，但不對檔案系統進行修改"

#: lib/poptI.c:321
msgid "do not verify package dependencies"
msgstr "不偵測套件相依性"

#: lib/poptI.c:327 lib/poptI.c:329 lib/poptQV.c:357 lib/poptQV.c:360
#: lib/poptQV.c:362
msgid "don't verify file digests"
msgstr "不驗證檔案摘要"

#: lib/poptI.c:331
msgid "don't install file security contexts"
msgstr "不安裝檔案安全上下文"

#: lib/poptI.c:335
msgid "do not reorder package installation to satisfy dependencies"
msgstr "不重新排列套件安裝順序以滿足相依鏈"

#: lib/poptI.c:343
#, c-format
msgid "do not execute %%pre scriptlet (if any)"
msgstr "不執行預先安裝短命令稿(如果存在)"

#: lib/poptI.c:346
#, c-format
msgid "do not execute %%post scriptlet (if any)"
msgstr "不執行安裝後短命令稿(如果存在)"

#: lib/poptI.c:349
#, c-format
msgid "do not execute %%preun scriptlet (if any)"
msgstr "不執行預先安裝短命令稿(如果存在)"

#: lib/poptI.c:352
#, c-format
msgid "do not execute %%postun scriptlet (if any)"
msgstr "不執行預先安裝短命令稿(如果存在)"

#: lib/poptI.c:362
msgid "do not execute any scriptlet(s) triggered by this package"
msgstr "不執行套件內的任何可觸發短命令稿"

#: lib/poptI.c:365
#, c-format
msgid "do not execute any %%triggerprein scriptlet(s)"
msgstr "不執行任何預先作業觸發執行的短命令稿"

#: lib/poptI.c:368
#, c-format
msgid "do not execute any %%triggerin scriptlet(s)"
msgstr "不執行任何安裝中觸發執行的短命令稿"

#: lib/poptI.c:371
#, c-format
msgid "do not execute any %%triggerun scriptlet(s)"
msgstr "不執行任何清除中觸發執行的短命令稿"

#: lib/poptI.c:374
#, c-format
msgid "do not execute any %%triggerpostun scriptlet(s)"
msgstr "不執行任何作業後觸發執行的短命令稿"

#: lib/poptI.c:378
msgid "upgrade to an old version of the package (--force on upgrades does this automatically)"
msgstr "更新到一個舊版本的套件 (在更新作業中 --force 指令會自動進行此步驟)"

#: lib/poptI.c:382
msgid "print percentages as package installs"
msgstr "安裝套件時印出進度百分比"

#: lib/poptI.c:384
msgid "relocate the package to <dir>, if relocatable"
msgstr "如果可以，把套件重新部署到 <目錄>"

#: lib/poptI.c:385
msgid "<dir>"
msgstr "<目錄>"

#: lib/poptI.c:387
msgid "relocate files from path <old> to <new>"
msgstr "將檔案從 <舊目錄> 重新部署到 <新目錄>"

#: lib/poptI.c:388
msgid "<old>=<new>"
msgstr "<舊目錄>=<新目錄>"

#: lib/poptI.c:391
msgid "save erased package files by repackaging"
msgstr "將已清除套件內的檔案另存為一個套件"

#: lib/poptI.c:394
msgid "ignore file conflicts between packages"
msgstr "忽略套件之間的檔案衝突"

#: lib/poptI.c:397
msgid "reinstall if the package is already present"
msgstr "如果套件已存在則重新安裝"

#: lib/poptI.c:399
msgid "deinstall new, reinstall old, package(s), back to <date>"
msgstr "反安裝新增，重新安裝舊的套件，回到<日期>"

#: lib/poptI.c:400 lib/poptI.c:403
msgid "<date>"
msgstr "<日期>"

#: lib/poptI.c:402
msgid "If transaction fails rollback to <date>"
msgstr "如果異動作業失敗就回溯到 <date>"

#: lib/poptI.c:405
msgid "Exclude Transaction I.D. from rollback"
msgstr "從回溯中排除異動作業識別號"

#: lib/poptI.c:406
msgid "<tid>"
msgstr "<tid>"

#: lib/poptI.c:408
msgid "don't install, but tell if it would work or not"
msgstr "不真正安裝，只回報作業結果是否正確"

#: lib/poptI.c:411
msgid "upgrade package(s)"
msgstr "更新套件"

#: lib/poptQV.c:115
msgid "query/verify all packages"
msgstr "查詢/校驗所有套件"

#: lib/poptQV.c:117
msgid "rpm checksig mode"
msgstr "rpm 檢查簽章模式"

#: lib/poptQV.c:119
msgid "query/verify package(s) owning file"
msgstr "查詢/校驗屬於套件的檔案"

#: lib/poptQV.c:121
msgid "query/verify package(s) in group"
msgstr "查詢/校驗套件所屬的組別"

#: lib/poptQV.c:123
msgid "query/verify a package file"
msgstr "查詢/校驗一個套件檔案"

#: lib/poptQV.c:126
msgid "query/verify package(s) from TOP file tree walk"
msgstr "從頂端遍歷檔案樹查詢/驗證套件"

#: lib/poptQV.c:128
msgid "query/verify package(s) from system HDLIST"
msgstr "系統 HDLIST 查詢/驗證套件從"

#: lib/poptQV.c:131
msgid "query/verify package(s) with package identifier"
msgstr "根據套件的識別查詢/校驗套件"

#: lib/poptQV.c:133
msgid "query/verify package(s) with header identifier"
msgstr "根據表頭識別查詢/校驗套件"

#: lib/poptQV.c:135
msgid "query/verify package(s) with file identifier"
msgstr "根據檔案識別查詢/校驗套件"

#: lib/poptQV.c:138
msgid "rpm query mode"
msgstr "rpm 查詢模式"

#: lib/poptQV.c:140
msgid "query/verify a header instance"
msgstr "查詢/驗證表頭實體"

#: lib/poptQV.c:142
msgid "query a spec file"
msgstr "查詢一個規格檔案"

#: lib/poptQV.c:142 lib/poptQV.c:144
msgid "<spec>"
msgstr "<規格檔>"

#: lib/poptQV.c:144
msgid "query source metadata from spec file parse"
msgstr "從 spec 檔案剖析來查詢原始碼後設資料"

#: lib/poptQV.c:146
msgid "query/verify package(s) from install transaction"
msgstr "從安裝異動作業查詢/驗證套件"

#: lib/poptQV.c:148
msgid "query the package(s) triggered by the package"
msgstr "查詢由套件所觸發的套件"

#: lib/poptQV.c:150
msgid "rpm verify mode"
msgstr "rpm 校驗模式"

#: lib/poptQV.c:152
msgid "query/verify the package(s) which require a dependency"
msgstr "查詢/校驗需要某個相依物件的套件"

#: lib/poptQV.c:154
msgid "query/verify the package(s) which require any contained provide"
msgstr "查詢/驗證需要所含提供名稱的套件"

#: lib/poptQV.c:158
msgid "query/verify the package(s) which provide a dependency"
msgstr "查詢/校驗提供某個相依物件的套件"

#: lib/poptQV.c:161
msgid "create transaction set"
msgstr "建立異動作業集"

#: lib/poptQV.c:163
msgid "do not order transaction set"
msgstr "不排序異動作業集"

#: lib/poptQV.c:165
msgid "do not glob arguments"
msgstr "不以萬用字元解析引數"

#: lib/poptQV.c:167
msgid "do not process non-package files as manifests"
msgstr "不以清單方式處理非套件檔案"

#: lib/poptQV.c:169
msgid "do not read headers"
msgstr "不讀取表頭"

#: lib/poptQV.c:284
msgid "list all configuration files"
msgstr "列出所有配置檔案"

#: lib/poptQV.c:286
msgid "list all documentation files"
msgstr "列出所有文件檔案"

#: lib/poptQV.c:288
msgid "dump basic file information"
msgstr "調出基本的檔案資訊"

#: lib/poptQV.c:292
msgid "list files in package"
msgstr "列出套件內的檔案"

#: lib/poptQV.c:301 lib/poptQV.c:348
#, c-format
msgid "skip %%config files"
msgstr "跳過 %%config 檔案"

#: lib/poptQV.c:304 lib/poptQV.c:351
#, c-format
msgid "skip %%doc files"
msgstr "跳過 %%doc 檔案"

#: lib/poptQV.c:307
#, c-format
msgid "skip %%ghost files"
msgstr "略過 %%ghost 檔案"

#: lib/poptQV.c:311
#, c-format
msgid "skip %%license files"
msgstr "略過 %%license 檔案"

#: lib/poptQV.c:314
#, c-format
msgid "skip %%readme files"
msgstr "略過 %%readme 檔案"

#: lib/poptQV.c:320
msgid "use the following query format"
msgstr "使用以下的查詢格式"

#: lib/poptQV.c:320
msgid "QUERYFORMAT"
msgstr "QUERYFORMAT"

#: lib/poptQV.c:322
msgid "substitute i18n sections into spec file"
msgstr "替代 i18n 區段進入規格檔案"

#: lib/poptQV.c:324
msgid "display the states of the listed files"
msgstr "顯示列出的每個檔案的狀態"

#: lib/poptQV.c:366
msgid "don't verify size of files"
msgstr "不校驗檔案大小"

#: lib/poptQV.c:369
msgid "don't verify symlink path of files"
msgstr "不校驗檔案的連結路徑"

#: lib/poptQV.c:372
msgid "don't verify owner of files"
msgstr "不校驗檔案的擁有者"

#: lib/poptQV.c:375
msgid "don't verify group of files"
msgstr "不校驗檔案的屬組"

#: lib/poptQV.c:378
msgid "don't verify modification time of files"
msgstr "不校驗檔案的修改時間"

#: lib/poptQV.c:381 lib/poptQV.c:384
msgid "don't verify mode of files"
msgstr "不校驗檔案的模式"

#: lib/poptQV.c:387
msgid "don't verify file security contexts"
msgstr "不校驗檔案的安全關聯"

#: lib/poptQV.c:389
msgid "don't verify files in package"
msgstr "不校驗套件內的檔案"

#: lib/poptQV.c:392 lib/poptQV.c:395
msgid "don't verify package dependencies"
msgstr "不校驗套件的相依關係"

#: lib/poptQV.c:400 lib/poptQV.c:404 lib/poptQV.c:407 lib/poptQV.c:410
msgid "don't execute verify script(s)"
msgstr "不執行校驗命令稿"

#: lib/poptQV.c:444
msgid "sign package(s) (identical to --resign)"
msgstr "對套件簽章 (與 --resign 含義相同)"

#: lib/poptQV.c:446
msgid "verify package signature(s)"
msgstr "校驗套件簽章"

#: lib/poptQV.c:448
msgid "delete package signatures"
msgstr "刪除套件簽章"

#: lib/poptQV.c:450
msgid "import an armored public key"
msgstr "匯入一個受保護的公鑰"

#: lib/poptQV.c:452
msgid "sign package(s) (identical to --addsign)"
msgstr "對套件簽章 (與 --addsign 含義相同)"

#: lib/poptQV.c:454
msgid "generate signature"
msgstr "產生簽章"

#: lib/poptQV.c:457
msgid "specify trust metric"
msgstr "指定信賴度量資訊"

#: lib/poptQV.c:460
msgid "set ultimate trust when importing pubkey(s)"
msgstr "匯入 pubkey 時設定最大信賴"

#: lib/poptQV.c:463
msgid "unset ultimate trust when importing pubkey(s)"
msgstr "匯入 pubkey 時解除設定最大信賴"

#: lib/psm.c:203
msgid "source package expected, binary found\n"
msgstr "需要一個原始碼套件，但這是一個二進位套件\n"

#: lib/psm.c:283 lib/psm.c:296
#, c-format
msgid "cannot write to %%%s %s\n"
msgstr "無法寫入 %%%s %s\n"

#: lib/psm.c:329
msgid "source package contains no .spec file\n"
msgstr "原始碼套件內沒有 .spec 檔案\n"

#: lib/psm.c:445
#, c-format
msgid "%s: waitpid(%d) rc %d status %x secs %u.%03u\n"
msgstr "%s：waitpid (%d) rc %d 狀態 %x 秒 %u.%03u\n"

#: lib/psm.c:637
#, c-format
msgid "%s: %s(%s-%s-%s.%s) running <lua> scriptlet.\n"
msgstr "%s: %s(%s-%s-%s.%s) 正在執行 <lua> 短命令稿。\n"

#: lib/psm.c:658
#, c-format
msgid "%s: %s(%s-%s-%s.%s) skipping redundant \"%s\".\n"
msgstr "%s：%s(%s-%s-%s.%s) 跳過冗餘的「%s」。\n"

#: lib/psm.c:666
#, c-format
msgid "%s: %s(%s-%s-%s.%s) %ssynchronous scriptlet start\n"
msgstr "%s：%s(%s-%s-%s.%s) %s 開始同步的短命令稿\n"

#: lib/psm.c:878
#, c-format
msgid "%s: %s(%s-%s-%s.%s)\texecv(%s) pid %d\n"
msgstr "%s：%s(%s-%s-%s.%s)\texecv(%s) pid %d\n"

#: lib/psm.c:926
#, c-format
msgid "%s(%s-%s-%s.%s) scriptlet failed, waitpid(%d) rc %d: %s\n"
msgstr "%s(%s-%s-%s.%s) 短命令稿執行失敗，waitpid(%d) rc %d：%s\n"

#: lib/psm.c:933
#, c-format
msgid "%s(%s-%s-%s.%s) scriptlet failed, signal %d\n"
msgstr "%s(%s-%s-%s.%s) 短命令稿執行失敗，信號 %d\n"

#: lib/psm.c:937
#, c-format
msgid "%s(%s-%s-%s.%s) scriptlet failed, exit status %d\n"
msgstr "%s(%s-%s-%s.%s) 短命令稿執行失敗，離開狀態 %d\n"

#: lib/psm.c:1571
#, c-format
msgid "%s: %s has %d files, test = %d\n"
msgstr "%s ：%s 含有 %d 個檔案，test = %d\n"

#: lib/psm.c:1745
#, c-format
msgid "%s: %s scriptlet failed (%d), skipping %s\n"
msgstr "%s：%s 短命令稿執行失敗 (%d)，略過 %s\n"

#: lib/psm.c:1856
msgid "Unable to reload signature header\n"
msgstr "無法重載簽章表頭\n"

#: lib/psm.c:1949
#, c-format
msgid "unpacking of archive failed%s%s: %s\n"
msgstr "解壓保存檔案失敗 %s%s：%s\n"

#: lib/psm.c:1950
msgid " on file "
msgstr "  於檔案 "

#: lib/psm.c:2127
#, c-format
msgid "%s failed on file %s: %s\n"
msgstr "%s 失敗的於檔案 %s: %s\n"

#: lib/psm.c:2130
#, c-format
msgid "%s failed: %s\n"
msgstr "%s 失敗：%s\n"

#: lib/query.c:123
#, c-format
msgid "incorrect format: %s\n"
msgstr "不正確的格式：%s\n"

#: lib/query.c:194
msgid "(contains no files)"
msgstr "(沒有包含檔案)"

#: lib/query.c:288
msgid "normal        "
msgstr "正常        "

#: lib/query.c:291
msgid "replaced      "
msgstr "被替換      "

#: lib/query.c:294
msgid "not installed "
msgstr "未安裝 "

#: lib/query.c:297
msgid "net shared    "
msgstr "網路共享    "

#: lib/query.c:300
msgid "wrong color   "
msgstr "錯誤顏色   "

#: lib/query.c:303
msgid "(no state)    "
msgstr "(無狀態)    "

#: lib/query.c:306
#, c-format
msgid "(unknown %3d) "
msgstr "(不明的 %3d) "

#: lib/query.c:325
msgid "package has not file owner/group lists\n"
msgstr "套件內沒有檔案擁有者/群組記錄\n"

#: lib/query.c:358
msgid "package has neither file owner or id lists\n"
msgstr "套件內沒有檔案擁有者與 ID 記錄\n"

#: lib/query.c:515
#, c-format
msgid "group %s does not contain any packages\n"
msgstr "群組 %s 內還沒有任何套件\n"

#: lib/query.c:524
#, c-format
msgid "no package triggers %s\n"
msgstr "沒有套件內建觸發器 %s\n"

#: lib/query.c:537 lib/query.c:558 lib/query.c:580 lib/query.c:615
#, c-format
msgid "malformed %s: %s\n"
msgstr "異常的 %s：%s\n"

#: lib/query.c:547 lib/query.c:564 lib/query.c:591 lib/query.c:620
#, c-format
msgid "no package matches %s: %s\n"
msgstr "沒有套件匹配：%s：%s\n"

#: lib/query.c:631
#, c-format
msgid "no package requires %s\n"
msgstr "沒有套件需要 %s\n"

#: lib/query.c:642
#, c-format
msgid "no package provides %s\n"
msgstr "沒有套件提供 %s\n"

#: lib/query.c:676
#, c-format
msgid "file %s: %s\n"
msgstr "檔案 %s：%s\n"

#: lib/query.c:679
#, c-format
msgid "file %s is not owned by any package\n"
msgstr "檔案 %s 不屬於任何套件\n"

#: lib/query.c:704
#, c-format
msgid "invalid package number: %s\n"
msgstr "不正確的套件編號：%s\n"

#: lib/query.c:707
#, c-format
msgid "package record number: %u\n"
msgstr "套件記錄：%u\n"

#: lib/query.c:711
#, c-format
msgid "record %u could not be read\n"
msgstr "記錄 %u 無法讀取\n"

#: lib/query.c:721 lib/query.c:727 lib/rpminstall.c:817
#, c-format
msgid "package %s is not installed\n"
msgstr "套件 %s 尚未安裝\n"

#: lib/rpmal.c:782
msgid "(added files)"
msgstr "(加入的檔案)"

#: lib/rpmal.c:861
msgid "(added provide)"
msgstr "(加入的提供物)"

#: lib/rpmchecksig.c:57
#, c-format
msgid "%s: open failed: %s\n"
msgstr "%s：開啟失敗：%s\n"

#: lib/rpmchecksig.c:69
msgid "makeTempFile failed\n"
msgstr "makeTempFile 失敗\n"

#: lib/rpmchecksig.c:112
#, c-format
msgid "%s: Fwrite failed: %s\n"
msgstr "%s: Fwrite 失敗：%s\n"

#: lib/rpmchecksig.c:122
#, c-format
msgid "%s: Fflush failed: %s\n"
msgstr "%s：Fflush 失敗：%s\n"

#: lib/rpmchecksig.c:216 lib/rpmchecksig.c:755
#, c-format
msgid "%s: not an rpm package\n"
msgstr "%s：不是一個 rpm 套件\n"

#: lib/rpmchecksig.c:221
#, c-format
msgid "%s: Can't sign v1 packaging\n"
msgstr "%s：無法對 v1 版打包簽章\n"

#: lib/rpmchecksig.c:225
#, c-format
msgid "%s: Can't re-sign v2 packaging\n"
msgstr "%s：無法對 v2 版打包重新簽章\n"

#: lib/rpmchecksig.c:345
#, c-format
msgid "%s: was already signed by key ID %s, skipping\n"
msgstr "%s: 已經由鍵值識別號 %s 所簽章, 跳過\n"

#: lib/rpmchecksig.c:375
#, c-format
msgid "%s: writeLead failed: %s\n"
msgstr "%s：writeLead 失敗：%s\n"

#: lib/rpmchecksig.c:381
#, c-format
msgid "%s: rpmWriteSignature failed: %s\n"
msgstr "%s：rpmWriteSignature 失敗：%s\n"

#: lib/rpmchecksig.c:609
#, c-format
msgid "%s: import read failed(%d).\n"
msgstr "%s：匯入讀取時失敗(%d)。\n"

#: lib/rpmchecksig.c:621
#, c-format
msgid "%s: import failed.\n"
msgstr "%s：匯入失敗。\n"

#: lib/rpmchecksig.c:657
#, c-format
msgid "%s: headerRead failed\n"
msgstr "%s：headerRead 失敗\n"

#: lib/rpmchecksig.c:671
#, c-format
msgid "%s: headerGetEntry failed\n"
msgstr "%s：headerGetEntry 失敗\n"

#: lib/rpmchecksig.c:761
#, c-format
msgid "%s: No signature available (v1.0 RPM)\n"
msgstr "%s：無可用簽章 (v1.0 RPM)\n"

#: lib/rpmchecksig.c:870
#, c-format
msgid "only V3 or V4 signatures can be verified, skipping V%u signature\n"
msgstr "只能校驗 V3 與 V4 版本的簽章，現在略過 V%u 版本的簽章\n"

#: lib/rpmchecksig.c:1036
msgid "NOT OK"
msgstr "不正確"

#: lib/rpmchecksig.c:1037 lib/rpmchecksig.c:1051
msgid " (MISSING KEYS:"
msgstr " (丟失的密鑰："

#: lib/rpmchecksig.c:1039 lib/rpmchecksig.c:1053
msgid ") "
msgstr ") "

#: lib/rpmchecksig.c:1040 lib/rpmchecksig.c:1054
msgid " (UNTRUSTED KEYS:"
msgstr " (不信任的密鑰："

#: lib/rpmchecksig.c:1042 lib/rpmchecksig.c:1056
msgid ")"
msgstr ")"

#: lib/rpmchecksig.c:1050
msgid "OK"
msgstr "正確"

#: lib/rpmds.c:922 lib/rpmds.c:3711
msgid "NO "
msgstr "否 "

#: lib/rpmds.c:922 lib/rpmds.c:3711
msgid "YES"
msgstr "是"

#: lib/rpmds.c:1414
msgid "PreReq:, Provides:, and Obsoletes: dependencies support versions."
msgstr "PreReq:、Provides:、以及 Obsoletes: 相依支援版本。"

#: lib/rpmds.c:1417
msgid "file name(s) stored as (dirName,baseName,dirIndex) tuple, not as path."
msgstr "檔案名稱儲存為 (dirName、baseName、dirIndex) 字組，而非路徑。"

#: lib/rpmds.c:1420
msgid "package payload can be compressed using bzip2."
msgstr "套件酬載曾經使用 bzip2 壓縮過。"

#: lib/rpmds.c:1423
msgid "package payload file(s) have \"./\" prefix."
msgstr "套件酬載檔案有\"./\"字首。"

#: lib/rpmds.c:1426
msgid "package name-version-release is not implicitly provided."
msgstr "套件的名稱-版本-發行編號沒有被隱含指出。"

#: lib/rpmds.c:1429
msgid "header tags are always sorted after being loaded."
msgstr "表頭標記總在載入之後自動排序。"

#: lib/rpmds.c:1432
msgid "the scriptlet interpreter can use arguments from header."
msgstr "命令稿解譯器可以從表頭中呼叫引數。"

#: lib/rpmds.c:1435
msgid "a hardlink file set may be installed without being complete."
msgstr "硬式鏈結檔案組合也許沒有被完整安裝。"

#: lib/rpmds.c:1438
msgid "package scriptlets may access the rpm database while installing."
msgstr "套件內建短命令稿在安裝程序中可以存取 rpm 資料庫。"

#: lib/rpmds.c:1442
msgid "internal support for lua scripts."
msgstr "內部支援 lua 命令稿。"

#: lib/rpmds.c:1446
msgid "header tags can be type int_64."
msgstr "頁首標記可以是 int_64 型態。"

#: lib/rpmds.c:1449
msgid "package payload can be in ustar tar archive format."
msgstr "套件酬載可以存在 ustar 打包格式之中。"

#: lib/rpmds.c:1452
msgid "package payload can be compressed using lzma."
msgstr "套件酬載可以使用 lzma 壓縮。"

#: lib/rpmds.c:1455
msgid "file digests can be other than MD5."
msgstr "檔案摘要可以不是 MD5。"

#: lib/rpmds.c:1545 lib/rpmds.c:3535
#, c-format
msgid "%s:%d \"%s\" has invalid name. Skipping ...\n"
msgstr "%s:%d「%s」的名稱無效。跳過…\n"

#: lib/rpmds.c:1569 lib/rpmds.c:3553
#, c-format
msgid "%s:%d \"%s\" has no comparison operator. Skipping ...\n"
msgstr "%s:%d「%s」沒有比較運算子。跳過…\n"

#: lib/rpmds.c:1580 lib/rpmds.c:3568
#, c-format
msgid "%s:%d \"%s\" has no EVR string. Skipping ...\n"
msgstr "%s:%d「%s」沒有 EVR 字串。跳過…\n"

#: lib/rpmds.c:3534 lib/rpmds.c:3552 lib/rpmds.c:3564
#, c-format
msgid "running \"%s\" pipe command\n"
msgstr "正在執行「%s」管道命令\n"

#: lib/rpmds.c:3566
#, c-format
msgid ""
"\tline %d: No EVR comparison value found.\n"
" Skipping ..."
msgstr ""
"\t列 %d：找不到 EVR 比較值。\n"
"跳過…"

#: lib/rpmds.c:3675
#, c-format
msgid ""
"The \"B\" dependency needs an epoch (assuming same epoch as \"A\")\n"
"\tA = \"%s\"\tB = \"%s\"\n"
msgstr ""
"「B」相依性需要 epoch (假設與「A」為相同 epoch)\n"
"\tA = 「%s」\tB = 「%s」\n"

#: lib/rpmds.c:3710
#, c-format
msgid "  %s    A %s\tB %s\n"
msgstr "  %s    A %s\tB %s\n"

#: lib/rpmds.c:3734
#, c-format
msgid "package %s has unsatisfied %s: %s\n"
msgstr "套件 %s 有不滿足的 %s：%s\n"

#: lib/rpmfc.c:93
#, c-format
msgid "\texecv(%s) pid %d\n"
msgstr "\texecv(%s) pid %d\n"

#: lib/rpmfc.c:99
#, c-format
msgid "Couldn't exec %s: %s\n"
msgstr "無法執行 %s：%s\n"

#: lib/rpmfc.c:104
#, c-format
msgid "Couldn't fork %s: %s\n"
msgstr "無法衍生 %s：%s\n"

#: lib/rpmfc.c:189
#, c-format
msgid "\twaitpid(%d) rc %d status %x\n"
msgstr "\twaitpid(%d) rc %d 狀態 %x\n"

#: lib/rpmfc.c:196
#, c-format
msgid "Command \"%s\" failed, exit(%d)\n"
msgstr "命令「%s」失敗，離開(%d)\n"

#: lib/rpmfc.c:201
#, c-format
msgid "failed to write all data to %s\n"
msgstr "寫入所有資料到 %s 時失敗\n"

#: lib/rpmfc.c:1003
#, c-format
msgid "magic_open(0x%x) failed: %s\n"
msgstr "magic_open(0x%x) 失敗：%s\n"

#: lib/rpmfc.c:1011
#, c-format
msgid "magic_load(ms, \"%s\") failed: %s\n"
msgstr "magic_load(ms，「%s」) 失敗：%s\n"

#: lib/rpmfc.c:1077
#, c-format
msgid "magic_file(ms, \"%s\") failed: mode %06o %s\n"
msgstr "magic_file(ms，「%s」) 失敗：模式 %06o %s\n"

#: lib/rpmfc.c:1295
#, c-format
msgid "Finding  %s: %s\n"
msgstr "正在尋找 %s：%s\n"

#: lib/rpmfc.c:1301 lib/rpmfc.c:1312
#, c-format
msgid "Failed to find %s:\n"
msgstr "尋找 %s 時失敗：\n"

#: lib/rpmfi.c:622
#, c-format
msgid "%s skipped due to missingok flag\n"
msgstr "%s 由於 missingok 旗標而被略過\n"

#: lib/rpmfi.c:874
msgid "========== relocations\n"
msgstr "========== 重新部署\n"

#: lib/rpmfi.c:878
#, c-format
msgid "%5d exclude  %s\n"
msgstr "%5d 排除  %s\n"

#: lib/rpmfi.c:881
#, c-format
msgid "%5d relocate %s -> %s\n"
msgstr "%5d 重新部署 %s -> %s\n"

#: lib/rpmfi.c:1015
#, c-format
msgid "excluding %s %s\n"
msgstr "排除 %s %s\n"

#: lib/rpmfi.c:1025
#, c-format
msgid "relocating %s to %s\n"
msgstr "重新部署 %s 到 %s\n"

#: lib/rpmfi.c:1117
#, c-format
msgid "relocating directory %s to %s\n"
msgstr "重新部署目錄 %s 到 %s\n"

#: lib/rpmgi.c:91 lib/rpminstall.c:125 lib/rpminstall.c:493
#: lib/rpminstall.c:622 lib/rpmrollback.c:166 lib/rpmts.c:553
#, c-format
msgid "open of %s failed: %s\n"
msgstr "開啟 %s 失敗：%s\n"

#: lib/rpmgi.c:423
#, c-format
msgid "unknown tag: \"%s\"\n"
msgstr "不明的標記：「%s」\n"

#: lib/rpmgi.c:764 lib/rpminstall.c:666 lib/rpminstall.c:851
msgid "Failed dependencies:\n"
msgstr "相依性偵測失敗：\n"

#: lib/rpmgi.c:770 lib/rpminstall.c:673
msgid "    Suggested resolutions:\n"
msgstr "    推薦解決方案：\n"

#: lib/rpminstall.c:192
msgid "Preparing..."
msgstr "正在準備…"

#: lib/rpminstall.c:194
msgid "Preparing packages for installation..."
msgstr "正在準備要安裝的套件…"

#: lib/rpminstall.c:212
msgid "Repackaging..."
msgstr "重新打包中…"

#: lib/rpminstall.c:214
msgid "Repackaging erased files..."
msgstr "正在重新打包被清除的檔案…"

#: lib/rpminstall.c:233
msgid "Upgrading..."
msgstr "更新中…"

#: lib/rpminstall.c:235
msgid "Upgrading packages..."
msgstr "正在更新套件…"

#: lib/rpminstall.c:331 lib/rpminstall.c:795
#, c-format
msgid "Autorollback Goal: %-24.24s (0x%08x)\n"
msgstr "自動回溯目的物：%-24.24s (0x%08x)\n"

#: lib/rpminstall.c:422
#, c-format
msgid "Adding goal: %s\n"
msgstr "加入目的物：%s\n"

#: lib/rpminstall.c:438
#, c-format
msgid "Retrieving %s\n"
msgstr "正在取回 %s\n"

#: lib/rpminstall.c:451
#, c-format
msgid " ... as %s\n"
msgstr " … 為 %s\n"

#: lib/rpminstall.c:455
#, c-format
msgid "skipping %s - transfer failed - %s\n"
msgstr "略過 %s - 傳輸失敗 - %s\n"

#: lib/rpminstall.c:512 lib/rpminstall.c:911
#, c-format
msgid "%s cannot be installed\n"
msgstr "%s 無法安裝\n"

#: lib/rpminstall.c:529
#, c-format
msgid "\tadded source package [%d]\n"
msgstr "\t加入原始碼套件 [%d]\n"

#: lib/rpminstall.c:554
#, c-format
msgid "package %s is not relocatable\n"
msgstr "套件 %s 不可重新部署\n"

#: lib/rpminstall.c:599
#, c-format
msgid "\tadded binary package [%d]\n"
msgstr "\t加入二進位套件 [%d]\n"

#: lib/rpminstall.c:605
#, c-format
msgid "package file %s was skipped\n"
msgstr "套件檔案 %s 已略過\n"

#: lib/rpminstall.c:609
#, c-format
msgid "file %s requires a newer version of RPM\n"
msgstr "檔案 %s 需要更新版本的 RPM\n"

#: lib/rpminstall.c:637
#, c-format
msgid "%s: not an rpm package (or package manifest): %s\n"
msgstr "%s: 不是 rpm 套件(或套件清單)：%s\n"

#: lib/rpminstall.c:652
#, c-format
msgid "found %d source and %d binary packages\n"
msgstr "找到 %d 個原始碼套件和 %d 個二進位套件\n"

#: lib/rpminstall.c:703
msgid "installing binary packages\n"
msgstr "正在安裝二進位套件\n"

#: lib/rpminstall.c:727
#, c-format
msgid "cannot open file %s: %s\n"
msgstr "無法開啟檔案 %s：%s\n"

#: lib/rpminstall.c:826
#, c-format
msgid "\"%s\" specifies multiple packages\n"
msgstr "「%s」指定了多個套件\n"

#: lib/rpminstall.c:895
#, c-format
msgid "cannot open %s: %s\n"
msgstr "無法開啟檔案 %s：%s\n"

#: lib/rpminstall.c:901
#, c-format
msgid "Installing %s\n"
msgstr "正在安裝 %s\n"

#: lib/rpmlead.c:56
#, c-format
msgid "read failed: %s (%d)\n"
msgstr "讀取失敗：%s (%d)\n"

#: lib/rpmlock.c:149 lib/rpmlock.c:158
#, c-format
msgid "can't create transaction lock on %s\n"
msgstr "無法於 %s 建立異動作業鎖定\n"

#: lib/rpmlock.c:154
#, c-format
msgid "waiting for transaction lock on %s\n"
msgstr "於 %s 等待異動作業鎖定\n"

#: lib/rpmps.c:201
msgid "different"
msgstr "不同的"

#: lib/rpmps.c:209
#, c-format
msgid "package %s is intended for a %s platform"
msgstr "套件 %s 是適用於用於 %s 平臺"

#: lib/rpmps.c:214
#, c-format
msgid "package %s is already installed"
msgstr "套件 %s 已經安裝了"

#: lib/rpmps.c:219
#, c-format
msgid "re-packaged package with %s: %s is missing"
msgstr "以 %s 重新包裝套件：缺少 %s"

#: lib/rpmps.c:224
#, c-format
msgid "path %s in package %s is not relocatable"
msgstr "在套件 %s 中的路徑 %s 無法重新部署"

#: lib/rpmps.c:229
#, c-format
msgid "file %s conflicts between attempted installs of %s and %s"
msgstr "在試圖安裝的 %s 和 %s 之間產生檔案 %s 的衝突"

#: lib/rpmps.c:234
#, c-format
msgid "file %s from install of %s conflicts with file from package %s"
msgstr "從 %s 安裝的檔案 %s 與來自套件 %s 的檔案產生衝突"

#: lib/rpmps.c:239
#, c-format
msgid "package %s (which is newer than %s) is already installed"
msgstr "套件 %s (較 %s 版本還新) 已經安裝了"

#: lib/rpmps.c:244
#, c-format
msgid "installing package %s needs %lu%cB on the %s filesystem"
msgstr "安裝套件 %s 時需要 %lu%cB 空間於檔案系統 %s 上"

#: lib/rpmps.c:254
#, c-format
msgid "installing package %s needs %lu inodes on the %s filesystem"
msgstr "安裝套件 %s 時需要 %lu 個節點於檔案系統 %s 上"

#: lib/rpmps.c:259
#, c-format
msgid "package %s pre-transaction syscall(s): %s failed: %s"
msgstr "套件 %s 的異動作業前系統呼叫：%s 失敗：%s"

#: lib/rpmps.c:263
#, c-format
msgid "%s is needed by %s%s"
msgstr "%s 被 %s%s 所需要"

#: lib/rpmps.c:265 lib/rpmps.c:270
msgid "(installed) "
msgstr "(已安裝) "

#: lib/rpmps.c:268
#, c-format
msgid "%s conflicts with %s%s"
msgstr "%s 與 %s%s 衝突"

#: lib/rpmps.c:274
#, c-format
msgid "installing package %s on %s rdonly filesystem"
msgstr "安裝套件 %s 於 %s 唯讀檔案系統"

#: lib/rpmps.c:279
#, c-format
msgid "unknown error %d encountered while manipulating package %s"
msgstr "不明錯誤 %d 發生在處理套件 %s 的程序中"

#: lib/rpmrc.c:191
#, c-format
msgid "missing second ':' at %s:%d\n"
msgstr "在 %s:%d 處漏失了第二個「:」\n"

#: lib/rpmrc.c:194
#, c-format
msgid "missing architecture name at %s:%d\n"
msgstr "在 %s:%d 處漏失了架構名稱\n"

#: lib/rpmrc.c:360
#, c-format
msgid "Incomplete data line at %s:%d\n"
msgstr "不完整資料列位於 %s:%d\n"

#: lib/rpmrc.c:365
#, c-format
msgid "Too many args in data line at %s:%d\n"
msgstr "在資料列的 %s:%d 中有太多引數\n"

#: lib/rpmrc.c:373
#, c-format
msgid "Bad arch/os number: %s (%s:%d)\n"
msgstr "損壞的架構/作業系統序號：%s (%s:%d)\n"

#: lib/rpmrc.c:410
#, c-format
msgid "Incomplete default line at %s:%d\n"
msgstr "不完整預設列位於 %s:%d\n"

#: lib/rpmrc.c:415
#, c-format
msgid "Too many args in default line at %s:%d\n"
msgstr "在預設列的 %s:%d 中有太多引數\n"

#: lib/rpmrc.c:675
#, c-format
msgid "Failed to read %s: %s.\n"
msgstr "讀取 %s 失敗: %s。\n"

#: lib/rpmrc.c:713
#, c-format
msgid "missing ':' (found 0x%02x) at %s:%d\n"
msgstr "缺少 ':' (找到 0x%02x) 於 %s:%d\n"

#: lib/rpmrc.c:730 lib/rpmrc.c:793
#, c-format
msgid "missing argument for %s at %s:%d\n"
msgstr "%s 缺少引數於 %s:%d\n"

#: lib/rpmrc.c:747 lib/rpmrc.c:769
#, c-format
msgid "%s expansion failed at %s:%d \"%s\"\n"
msgstr "%s 擴充失敗於 %s:%d \"%s\"\n"

#: lib/rpmrc.c:756
#, c-format
msgid "cannot open %s at %s:%d: %s\n"
msgstr "無法開啟 %s 於 %s:%d: %s\n"

#: lib/rpmrc.c:785
#, c-format
msgid "missing architecture for %s at %s:%d\n"
msgstr "缺少 %s 架構於 %s:%d\n"

#: lib/rpmrc.c:852
#, c-format
msgid "bad option '%s' at %s:%d\n"
msgstr "不當的選項 '%s' 於 %s:%d\n"

#: lib/rpmrc.c:1919
#, c-format
msgid "Cannot expand %s\n"
msgstr "無法展開 %s\n"

#: lib/rpmrc.c:1924
#, c-format
msgid "Cannot read %s, HOME is too large.\n"
msgstr "無法讀取 %s，HOME 過大。\n"

#: lib/rpmrc.c:1941
#, c-format
msgid "Unable to open %s for reading: %s.\n"
msgstr "無法開啟 %s 以讀取：%s\n"

#: lib/rpmrc.c:2086
#, c-format
msgid "Configured system provides (from /etc/rpm/sysinfo):\n"
msgstr "已組配的系統提供 (來自 /etc/rpm/sysinfo)：\n"

#: lib/rpmrc.c:2100
#, c-format
msgid "Features provided by rpmlib installer:\n"
msgstr "由 rpmlib 安裝程式提供的功能：\n"

#: lib/rpmrc.c:2114
#, c-format
msgid "Features provided by current cpuinfo (from /proc/cpuinfo):\n"
msgstr "由目前 cpuinfo 提供的功能 (來自 /proc/cpuinfo)：\n"

#: lib/rpmrc.c:2128
#, c-format
msgid "Features provided by current getconf:\n"
msgstr "由目前 getconf 提供的功能：\n"

#: lib/rpmrc.c:2142
#, c-format
msgid "Features provided by current uname:\n"
msgstr "由目前 uname 提供的功能：\n"

#: lib/rpmrollback.c:389
msgid "Failed dependencies"
msgstr "相依性失敗"

#: lib/rpmrollback.c:394
msgid "Ordering problems"
msgstr "定序問題"

#: lib/rpmrollback.c:399
msgid "Rollback problems"
msgstr "回溯問題"

#: lib/rpmrollback.c:518
#, c-format
msgid "Excluding TID from rollback: %-24.24s (0x%08x)\n"
msgstr "排除 TID 自回溯：%-24.24s (0x%08x)\n"

#: lib/rpmrollback.c:620
msgid "Missing re-packaged package(s)"
msgstr "缺少重新打包的套件"

#: lib/rpmrollback.c:628
#, c-format
msgid "Rollback packages (+%d/-%d) to %-24.24s (0x%08x):\n"
msgstr "回溯套件 (+%d/-%d) to %-24.24s (0x%08x)：\n"

#: lib/rpmrollback.c:654
msgid "Cleaning up repackaged packages:\n"
msgstr "正在清除重新產生的打包：\n"

#: lib/rpmrollback.c:661
#, c-format
msgid "\tRemoving %s:\n"
msgstr "\t正在移除 %s：\n"

#: lib/rpmsx.c:374
#, c-format
msgid "%s:  no newline on line number %d (only read %s)\n"
msgstr "%s:  在列號 %d 上沒有新列符號 (只有讀取 %s)\n"

#: lib/rpmsx.c:391
#, c-format
msgid "%s:  line number %d is missing fields (only read %s)\n"
msgstr "%s:  列號 %d 缺少欄位 (只有讀取 %s)\n"

#: lib/rpmsx.c:424
#, c-format
msgid "%s:  unable to compile regular expression %s on line number %d:  %s\n"
msgstr "%s： 無法編譯正規運算式 %s 於列號 %d: %s 處\n"

#: lib/rpmsx.c:439 lib/rpmsx.c:454
#, c-format
msgid "%s:  invalid type specifier %s on line number %d\n"
msgstr "%s： 指定了不正確的類型 %s 於第 %d 列處。\n"

#: lib/rpmsx.c:467
#, c-format
msgid "%s:  invalid context %s on line number %d\n"
msgstr "%s:  無效的上下文 %s 於列數 %d\n"

#: lib/rpmts.c:126
#, c-format
msgid "cannot open Packages database in %s\n"
msgstr "無法開啟套件資料庫 %s\n"

#: lib/rpmts.c:187
#, c-format
msgid "extra '(' in package label: %s\n"
msgstr "額外的「(」存在於套件標籤中：%s\n"

#: lib/rpmts.c:205
#, c-format
msgid "missing '(' in package label: %s\n"
msgstr "丟失的「(」存在於套件標籤中：%s\n"

#: lib/rpmts.c:213
#, c-format
msgid "missing ')' in package label: %s\n"
msgstr "丟失的「)」存在於套件標籤中：%s\n"

#: lib/rpmts.c:424
#, c-format
msgid "cannot open Solve database in %s\n"
msgstr "無法開啟解析資料庫於 %s\n"

#: lib/rpmts.c:543
#, c-format
msgid "incorrect solve path format: %s\n"
msgstr "不正確的路徑解析格式：%s\n"

#: lib/rpmts.c:573
#, c-format
msgid "Adding: %s\n"
msgstr "正在加入：%s\n"

#: lib/rpmts.c:584
#, c-format
msgid "Suggesting: %s\n"
msgstr "正在建議：%s\n"

#: lib/rpmts.c:1149
msgid "mounted filesystems:\n"
msgstr "已掛載的檔案系統：\n"

#: lib/rpmts.c:1151
msgid "    i        dev    bsize       bavail       iavail mount point\n"
msgstr "    i        dev    bsize       bavail       iavail 掛載點\n"

#: lib/rpmts.c:1232
#, c-format
msgid "%5d 0x%08x %8u %12ld %12ld %s %s\n"
msgstr "%5d 0x%08x %8u %12ld %12ld %s %s\n"

#: lib/signature.c:139
#, c-format
msgid "Expected size: %12lu = lead(%d)+sigs(%d)+pad(%d)+data(%lu)\n"
msgstr "預期的大小：%12lu = lead(%d)+sigs(%d)+pad(%d)+data(%lu)\n"

#: lib/signature.c:144
#, c-format
msgid "  Actual size: %12lu\n"
msgstr "  實際的大小：%12lu\n"

#: lib/signature.c:187
#, c-format
msgid "sigh size(%d): BAD, read returned %d\n"
msgstr "sigh 大小(%d):不當，讀取回傳的 %d\n"

#: lib/signature.c:192
#, c-format
msgid "sigh magic: BAD\n"
msgstr "sigh 魔術數字：不當\n"

#: lib/signature.c:200
#, c-format
msgid "sigh tags: BAD, no. of tags(%d) out of range\n"
msgstr "sigh 標記：不當，標記(%d)的號碼超出範圍\n"

#: lib/signature.c:208
#, c-format
msgid "sigh data: BAD, no. of  bytes(%d) out of range\n"
msgstr "sigh 資料：不當，位元組(%d)的號碼超出範圍\n"

#: lib/signature.c:224
#, c-format
msgid "sigh blob(%d): BAD, read returned %d\n"
msgstr "sigh 萬用字元解析(%d):不當，讀取回傳的 %d\n"

#: lib/signature.c:302
#, c-format
msgid "sigh tag[%d]: BAD, tag %d type %d offset %d count %d\n"
msgstr "sigh 標記[%d]:不當，標記 %d 型態 %d 偏移 %d 計數 %d\n"

#: lib/signature.c:312
#, c-format
msgid "sigh load: BAD\n"
msgstr "sigh 載入：不當\n"

#: lib/signature.c:324
#, c-format
msgid "sigh pad(%d): BAD, read %d bytes\n"
msgstr "sigh 填充(%d):不當，讀取 %d 位元組\n"

#: lib/signature.c:334
#, c-format
msgid "sigh sigSize(%d): BAD, fstat(2) failed\n"
msgstr "sigh sigSize(%d):不當，fstat(2)失敗\n"

#: lib/signature.c:371
#, c-format
msgid "Signature: size(%d)+pad(%d)\n"
msgstr "簽章：size(%d)+pad(%d)\n"

#: lib/signature.c:468 lib/signature.c:595 lib/signature.c:904
#: lib/signature.c:943
#, c-format
msgid "Could not exec %s: %s\n"
msgstr "無法執行 %s: %s\n"

#: lib/signature.c:484
msgid "pgp failed\n"
msgstr "pgp 失敗\n"

#: lib/signature.c:491
msgid "pgp failed to write signature\n"
msgstr "pgp 寫入簽章時失敗\n"

#: lib/signature.c:497
#, c-format
msgid "PGP sig size: %d\n"
msgstr "PGP 簽章大小：%d\n"

#: lib/signature.c:515 lib/signature.c:643
msgid "unable to read the signature\n"
msgstr "無法讀取簽章\n"

#: lib/signature.c:520
#, c-format
msgid "Got %d bytes of PGP sig\n"
msgstr "得到 %d 位元組的 PGP 簽章\n"

#: lib/signature.c:612
#, c-format
msgid "gpg exec failed (%d)\n"
msgstr "gpg 執行失敗 (%d)\n"

#: lib/signature.c:619
msgid "gpg failed to write signature\n"
msgstr "gpg 寫入簽章時失敗\n"

#: lib/signature.c:625
#, c-format
msgid "GPG sig size: %d\n"
msgstr "GPG sig 大小：%d\n"

#: lib/signature.c:648
#, c-format
msgid "Got %d bytes of GPG sig\n"
msgstr "得到 %d 位元組的 GPG sig\n"

#: lib/signature.c:948 lib/signature.c:1001
#, c-format
msgid "Invalid %%_signature spec in macro file\n"
msgstr "在巨集檔案中有無效的 %%_signature spec\n"

#: lib/signature.c:981
#, c-format
msgid "You must set \"%%_gpg_name\" in your macro file\n"
msgstr "您必須在您的巨集檔案中設定 \"%%_gpg_name\"\n"

#: lib/signature.c:995
#, c-format
msgid "You must set \"%%_pgp_name\" in your macro file\n"
msgstr "您必須在您的巨集檔案中設定 \"%%_pgp_name\"\n"

#: lib/signature.c:1043
msgid "Header+Payload size: "
msgstr "表頭+酬載大小："

#: lib/signature.c:1084
msgid "MD5 digest: "
msgstr "MD 5 摘要："

#: lib/signature.c:1144
msgid "Header SHA1 digest: "
msgstr "表頭 SHA1 摘要："

#: lib/signature.c:1225 lib/signature.c:1415
msgid "Header "
msgstr "表頭 "

#: lib/signature.c:1294
msgid " signature: "
msgstr " 簽章："

#: lib/signature.c:1421
msgid " DSA signature: "
msgstr " DSA 簽章："

#: lib/signature.c:1503
#, c-format
msgid "Verify signature: BAD PARAMETERS\n"
msgstr "驗證簽章：不當的參數\n"

#: lib/signature.c:1534
#, c-format
msgid "Broken MD5 digest: UNSUPPORTED\n"
msgstr "不完整的 MD 5 摘要：不支援\n"

#: lib/signature.c:1538
#, c-format
msgid "Signature: UNKNOWN (%d)\n"
msgstr "簽章：不明 (%d)\n"

#: lib/transaction.c:890
#, c-format
msgid "excluding directory %s\n"
msgstr "排除目錄 %s\n"

#: lib/transaction.c:1013
#, c-format
msgid "rpmdb erase failed. NEVRA: %s\n"
msgstr "rpmdb 清除失敗。NEVRA：%s\n"

#: lib/transaction.c:1031
#, c-format
msgid "Rollback to %-24.24s (0x%08x)\n"
msgstr "回溯到 %-24.24s (0x%08x)\n"

#: lib/transaction.c:1178
msgid "Invalid number of transaction elements.\n"
msgstr "無效的異動作業元件號碼。\n"

#: lib/transaction.c:1251
#, c-format
msgid "sanity checking %d elements\n"
msgstr "明智地檢查 %d 元件\n"

#: lib/transaction.c:1324
msgid "running pre-transaction scripts\n"
msgstr "正在執行異動作業前命令稿\n"

#: lib/transaction.c:1399
#, c-format
msgid "computing %d file fingerprints\n"
msgstr "正在計算 %d 個檔案指紋\n"

#: lib/transaction.c:1488
msgid "computing file dispositions\n"
msgstr "計算檔案部署\n"

#: lib/transaction.c:1890
msgid "running post-transaction scripts\n"
msgstr "正在執行異動作業後期命令稿\n"

#: lib/verify.c:305
#, c-format
msgid "missing   %c %s"
msgstr "缺少   %c %s"

#: lib/verify.c:424
#, c-format
msgid "Unsatisfied dependencies for %s:\n"
msgstr "無法滿足 %s 的相依性\n"

#: rpmdb/db3.c:162
#, c-format
msgid "db%d error(%d) from %s: %s\n"
msgstr "資料庫%d 錯誤(%d) 來自 %s: %s\n"

#: rpmdb/db3.c:165
#, c-format
msgid "db%d error(%d): %s\n"
msgstr "資料庫%d 錯誤(%d): %s\n"

#: rpmdb/db3.c:191
#, c-format
msgid "closed   db environment %s/%s\n"
msgstr "關閉資料庫環境 %s/%s\n"

#: rpmdb/db3.c:210
#, c-format
msgid "removed  db environment %s/%s\n"
msgstr "移除資料庫環境 %s/%s\n"

#: rpmdb/db3.c:331
#, c-format
msgid "opening  db environment %s/%s %s\n"
msgstr "開啟資料庫環境 %s/%s %s\n"

#: rpmdb/db3.c:954
#, c-format
msgid "closed   db index       %s/%s\n"
msgstr "關閉資料庫索引       %s/%s\n"

#: rpmdb/db3.c:1024
#, c-format
msgid "verified db index       %s/%s\n"
msgstr "已驗證資料庫索引       %s/%s\n"

#: rpmdb/db3.c:1168
#, c-format
msgid "unshared posix mutexes found(%d), adding DB_PRIVATE, using fcntl lock\n"
msgstr "找到不共享的 posix mutexes (%d)，加入 DB_PRIVATE，正在使用 fcntl 鎖定\n"

#: rpmdb/db3.c:1274
msgid "Runnning db->verify ...\n"
msgstr "正在執行資料庫->驗證…\n"

#: rpmdb/db3.c:1338
#, c-format
msgid "opening  db index       %s/%s %s mode=0x%x\n"
msgstr "開啟資料庫索引       %s/%s %s 模式=0x%x\n"

#: rpmdb/db3.c:1579
#, c-format
msgid "cannot get %s lock on %s/%s\n"
msgstr "無法取得 %s 鎖定於 %s/%s\n"

#: rpmdb/db3.c:1581
msgid "exclusive"
msgstr "互斥"

#: rpmdb/db3.c:1581
msgid "shared"
msgstr "共享"

#: rpmdb/db3.c:1585
#, c-format
msgid "locked   db index       %s/%s\n"
msgstr "鎖定的資料庫索引       %s/%s\n"

#: rpmdb/dbconfig.c:575
#, c-format
msgid "unrecognized db option: \"%s\" ignored.\n"
msgstr "無法辨識的資料庫選項：\"%s\" 忽略。\n"

#: rpmdb/dbconfig.c:615
#, c-format
msgid "%s has invalid numeric value, skipped\n"
msgstr "%s 有無效的數值，略過\n"

#: rpmdb/dbconfig.c:624
#, c-format
msgid "%s has too large or too small long value, skipped\n"
msgstr "%s 有太大或太小的長整數值，略過\n"

#: rpmdb/dbconfig.c:633
#, c-format
msgid "%s has too large or too small integer value, skipped\n"
msgstr "%s 有太大或太小的整數值，略過\n"

#: rpmdb/header.c:2833
msgid "missing { after %"
msgstr "% 之後缺少 {"

#: rpmdb/header.c:2863
msgid "missing } after %{"
msgstr "%{ 之後缺少 }"

#: rpmdb/header.c:2879
msgid "empty tag format"
msgstr "清空標記格式"

#: rpmdb/header.c:2891
msgid "empty tag name"
msgstr "清空標記名稱"

#: rpmdb/header.c:2900
msgid "unknown tag"
msgstr "不明的標記"

#: rpmdb/header.c:2927
msgid "] expected at end of array"
msgstr "] 預期在陣列的結束"

#: rpmdb/header.c:2940
msgid "unexpected ]"
msgstr "未預期的 ]"

#: rpmdb/header.c:2953
msgid "unexpected }"
msgstr "未預期的 }"

#: rpmdb/header.c:3017
msgid "? expected in expression"
msgstr "? 預期於運算式中"

#: rpmdb/header.c:3024
msgid "{ expected after ? in expression"
msgstr "{ 預期於運算式中 ? 之後"

#: rpmdb/header.c:3036 rpmdb/header.c:3076
msgid "} expected in expression"
msgstr "} 預期於運算式中"

#: rpmdb/header.c:3044
msgid ": expected following ? subexpression"
msgstr "： 預期跟著子運算式"

#: rpmdb/header.c:3062
msgid "{ expected after : in expression"
msgstr "{ 預期於運算式中 : 之後"

#: rpmdb/header.c:3084
msgid "| expected at end of expression"
msgstr "| 預期於運算式的結束"

#: rpmdb/header.c:3187
msgid "(index out of range)"
msgstr "(索引超出範圍)"

#: rpmdb/header.c:3456
msgid "array iterator used with different sized arrays"
msgstr "用於不同大小陣列的陣列迭代器"

#: rpmdb/header.c:3770 rpmdb/header.c:3807 rpmdb/header.c:3830
msgid "(not a number)"
msgstr "(不是數字)"

#: rpmdb/header.c:3869
#, c-format
msgid "%c"
msgstr "%c"

#: rpmdb/header.c:3886
msgid "%a %b %d %Y"
msgstr "%a %b %d %Y"

#: rpmdb/header_internal.c:164
#, c-format
msgid "Data type %d not supported\n"
msgstr "不支援資料類型 %d\n"

#: rpmdb/poptDB.c:18
msgid "initialize database"
msgstr "初始化資料庫"

#: rpmdb/poptDB.c:20
msgid "rebuild database inverted lists from installed package headers"
msgstr "從安裝的套件表頭重建資料庫的反相清單"

#: rpmdb/poptDB.c:23
msgid "verify database files"
msgstr "驗證資料庫檔案"

#: rpmdb/rpmdb.c:208
#, c-format
msgid "dbiTagsInit: unrecognized tag name: \"%s\" ignored\n"
msgstr "dbiTagsInit：無法辨識的標記名稱：\"%s\"忽略\n"

#: rpmdb/rpmdb.c:319
#, c-format
msgid "cannot open %s index using db%d - %s (%d)\n"
msgstr "無法使用資料庫 %2$d- %3$s(%4$d) 開啟 %1$s 索引\n"

#: rpmdb/rpmdb.c:339
#, c-format
msgid "cannot open %s index\n"
msgstr "無法開啟 %s 索引\n"

#: rpmdb/rpmdb.c:809
#, c-format
msgid "incorrect format: \"%s\": %s\n"
msgstr "不正確格式：「%s」：%s\n"

#: rpmdb/rpmdb.c:1130
msgid "no dbpath has been set\n"
msgstr "沒有 dbpath 已被設定\n"

#: rpmdb/rpmdb.c:1444 rpmdb/rpmdb.c:1582 rpmdb/rpmdb.c:1638 rpmdb/rpmdb.c:2542
#: rpmdb/rpmdb.c:2696 rpmdb/rpmdb.c:3477
#, c-format
msgid "error(%d) getting \"%s\" records from %s index\n"
msgstr "從 %3$s 索引取得 \"%2$s\" 記錄時產生錯誤(%1$d)\n"

#: rpmdb/rpmdb.c:1850
msgid "miFreeHeader: skipping"
msgstr "miFreeHeader：跳過"

#: rpmdb/rpmdb.c:1860
#, c-format
msgid "error(%d) storing record #%d into %s\n"
msgstr "儲存記錄 #%2$d 進入 %3$s 時產生錯誤(%1$d)\n"

#: rpmdb/rpmdb.c:2420
msgid "rpmdbNextIterator: skipping"
msgstr "rpmdbNextIterator：跳過"

#: rpmdb/rpmdb.c:2452
#, c-format
msgid "rpmdb: damaged header #%u retrieved -- skipping.\n"
msgstr "rpmdb：已取回損壞的表頭 #%u -- 跳過。\n"

#: rpmdb/rpmdb.c:2800
#, c-format
msgid "%s: cannot read header at 0x%x\n"
msgstr "%s: 無法讀取在 0x%x 的表頭\n"

#: rpmdb/rpmdb.c:2869
#, c-format
msgid "error(%d) setting header #%d record for %s removal\n"
msgstr "設定用於 %3$s 撤除的表頭 #%2$d 記錄時產生錯誤(%1$d)\n"

#: rpmdb/rpmdb.c:2980
#, c-format
msgid "removing \"%s\" from %s index.\n"
msgstr "正在從 %1$s 索引移除 \"%2$s\"。\n"

#: rpmdb/rpmdb.c:2984
#, c-format
msgid "removing %d entries from %s index.\n"
msgstr "正在從 %2$s 索引移除 %1$d 項條目。\n"

#: rpmdb/rpmdb.c:3012
#, c-format
msgid "error(%d) setting \"%s\" records from %s index\n"
msgstr "從 %3$s 索引設定 \"%2$s\" 記錄時產生錯誤(%1$d)\n"

#: rpmdb/rpmdb.c:3033
#, c-format
msgid "error(%d) storing record \"%s\" into %s\n"
msgstr "儲存記錄 \"%2$s\" 進入 %3$s 時產生錯誤(%1$d)\n"

#: rpmdb/rpmdb.c:3043
#, c-format
msgid "error(%d) removing record \"%s\" from %s\n"
msgstr "從 %3$s 移除記錄 \"%2$s\" 時產生錯誤(%1$d)\n"

#: rpmdb/rpmdb.c:3214
#, c-format
msgid "error(%d) allocating new package instance\n"
msgstr "配置新套件實體時產生錯誤(%d)\n"

#: rpmdb/rpmdb.c:3280
msgid "rpmdbAdd: skipping"
msgstr "rpmdbAdd：跳過"

#: rpmdb/rpmdb.c:3452
#, c-format
msgid "adding \"%s\" to %s index.\n"
msgstr "正在加入 \"%s\" 到 %s 索引。\n"

#: rpmdb/rpmdb.c:3456
#, c-format
msgid "adding %d entries to %s index.\n"
msgstr "正在加入 %d 項條目到 %s 索引。\n"

#: rpmdb/rpmdb.c:3496
#, c-format
msgid "error(%d) storing record %s into %s\n"
msgstr "儲存記錄 %2$s 於 %3$s 時產生錯誤(%1$d)\n"

#: rpmdb/rpmdb.c:3875
#, c-format
msgid "removing %s after successful db3 rebuild.\n"
msgstr "成功重建 db3 之後移除 %s。\n"

#: rpmdb/rpmdb.c:3919
msgid "no dbpath has been set"
msgstr "沒有 dbpath 已被設定"

#: rpmdb/rpmdb.c:3951
#, c-format
msgid "rebuilding database %s into %s\n"
msgstr "重建資料庫 %s 於 %s\n"

#: rpmdb/rpmdb.c:3955
#, c-format
msgid "temporary database %s already exists\n"
msgstr "臨時資料庫 %s 已經存在\n"

#: rpmdb/rpmdb.c:3961
#, c-format
msgid "creating directory %s\n"
msgstr "產生目錄 %s\n"

#: rpmdb/rpmdb.c:3963
#, c-format
msgid "creating directory %s: %s\n"
msgstr "產生目錄 %s: %s\n"

#: rpmdb/rpmdb.c:3972
#, c-format
msgid "opening old database with dbapi %d\n"
msgstr "以 dbapi %d 開啟舊的資料庫\n"

#: rpmdb/rpmdb.c:3983
#, c-format
msgid "opening new database with dbapi %d\n"
msgstr "以 dbapi %d 開啟新的資料庫\n"

#: rpmdb/rpmdb.c:4014
#, c-format
msgid "header #%u in the database is bad -- skipping.\n"
msgstr "在資料庫中有不當的表頭 #%u -- 跳過。\n"

#: rpmdb/rpmdb.c:4054
#, c-format
msgid "cannot add record originally at %u\n"
msgstr "無法加入原本在 %u 的記錄\n"

#: rpmdb/rpmdb.c:4068
msgid "failed to rebuild database: original database remains in place\n"
msgstr "重建資料庫時失敗：原來的資料庫保持原狀\n"

#: rpmdb/rpmdb.c:4080
msgid "failed to replace old database with new database!\n"
msgstr "以新的資料庫取代舊的資料庫時失敗！\n"

#: rpmdb/rpmdb.c:4082
#, c-format
msgid "replace files in %s with files from %s to recover"
msgstr "以 %2$s 的檔案取代 %1$s 中的檔案來回復"

#: rpmdb/rpmdb.c:4092
#, c-format
msgid "removing directory %s\n"
msgstr "移除目錄 %s\n"

#: rpmdb/rpmdb.c:4094
#, c-format
msgid "failed to remove directory %s: %s\n"
msgstr "移除目錄時失敗 %s: %s\n"

#: rpmdb/sqlite.c:666
#, c-format
msgid "Unable to get lock on db %s, retrying... (%d)\n"
msgstr "無法取得資料庫 %s 的鎖定，重試中…(%d)\n"

#: rpmdb/sqlite.c:826
#, c-format
msgid "closed   sql db         %s\n"
msgstr "已關閉   sql 庫料庫         %s\n"

#: rpmdb/sqlite.c:927
#, c-format
msgid "opening  sql db         %s (%s) mode=0x%x\n"
msgstr "開啟  sql 庫料庫         %s (%s) 模式=0x%x\n"

#: rpmio/macro.c:240
#, c-format
msgid "======================== active %d empty %d\n"
msgstr "======================== 作用中 %d 清空 %d\n"

#: rpmio/macro.c:395
#, c-format
msgid "%3d>%*s(empty)"
msgstr "%3d>%*s(清空)"

#: rpmio/macro.c:438
#, c-format
msgid "%3d<%*s(empty)\n"
msgstr "%3d<%*s(清空)\n"

#: rpmio/macro.c:672 rpmio/macro.c:713
#, c-format
msgid "Macro %%%s has unterminated body\n"
msgstr "巨集 %%%s 具有未終結的主體\n"

#: rpmio/macro.c:735
#, c-format
msgid "Macro %%%s has illegal name (%%define)\n"
msgstr "巨集 %%%s 具有不合法的名稱 (%%define)\n"

#: rpmio/macro.c:741
#, c-format
msgid "Macro %%%s has unterminated opts\n"
msgstr "巨集 %%%s 具有未終結的選項\n"

#: rpmio/macro.c:746
#, c-format
msgid "Macro %%%s has empty body\n"
msgstr "巨集 %%%s 具有清空的主體\n"

#: rpmio/macro.c:752
#, c-format
msgid "Macro %%%s failed to expand\n"
msgstr "巨集 %%%s 展開時失敗\n"

#: rpmio/macro.c:791
#, c-format
msgid "Macro %%%s has illegal name (%%undefine)\n"
msgstr "巨集 %%%s 具有不合法的名稱 (%%undefine)\n"

#: rpmio/macro.c:915
#, c-format
msgid "Macro %%%s (%s) was not used below level %d\n"
msgstr "巨集 %%%s (%s) 在等級 %d 之下未被使用\n"

#: rpmio/macro.c:1042
#, c-format
msgid "Unknown option %c in %s(%s)\n"
msgstr "在 %2$s(%3$s) 中有不明的選項 %1$c\n"

#: rpmio/macro.c:1245
#, c-format
msgid "Recursion depth(%d) greater than max(%d)\n"
msgstr "遞迴深度(%d)大於最大值(%d)\n"

#: rpmio/macro.c:1318 rpmio/macro.c:1335
#, c-format
msgid "Unterminated %c: %s\n"
msgstr "未終結的 %c: %s\n"

#: rpmio/macro.c:1376
#, c-format
msgid "A %% is followed by an unparseable macro\n"
msgstr "在無法解析的巨集之後跟著一個 %%\n"

#: rpmio/macro.c:1543
#, c-format
msgid "Macro %%%.*s not found, skipping\n"
msgstr "找不到巨集 %%%.*s，跳過\n"

#: rpmio/macro.c:1880
msgid "Macro expansion too big for target buffer\n"
msgstr "對於目標緩衝區的巨集展開太大\n"

#: rpmio/macro.c:1914
#, c-format
msgid "Macro '%s' is readonly and cannot be changed.\n"
msgstr "巨集「%s」是唯讀而無法變更。\n"

#: rpmio/macro.c:2113 rpmio/macro.c:2119
#, c-format
msgid "File %s: %s\n"
msgstr "檔案 %s: %s\n"

#: rpmio/macro.c:2122
#, c-format
msgid "File %s is smaller than %u bytes\n"
msgstr "檔案 %s 小於 %u 位元組\n"

#: rpmio/rpmdav.c:662
msgid "Authorization Required"
msgstr "授權必要"

#: rpmio/rpmdav.c:664
msgid "Redirect"
msgstr "重新導向"

#: rpmio/rpmdav.c:666
msgid "Server Error"
msgstr "伺服器錯誤"

#: rpmio/rpmdav.c:668
msgid "Unknown Error"
msgstr "不明的錯誤"

#: rpmio/rpmio.c:719
msgid "Success"
msgstr "成功"

#: rpmio/rpmio.c:742
msgid "Bad server response"
msgstr "不當的伺服器回應"

#: rpmio/rpmio.c:744
msgid "Server I/O error"
msgstr "伺服器 I/O 錯誤"

#: rpmio/rpmio.c:746
msgid "Server timeout"
msgstr "伺服器逾時"

#: rpmio/rpmio.c:748
msgid "Unable to lookup server host address"
msgstr "無法查找伺服器主機位址"

#: rpmio/rpmio.c:750
msgid "Unable to lookup server host name"
msgstr "無法查找伺服器主機名稱"

#: rpmio/rpmio.c:752
msgid "Failed to connect to server"
msgstr "連接到伺服器時失敗"

#: rpmio/rpmio.c:754
msgid "Failed to establish data connection to server"
msgstr "建立資料連接到伺服器時失敗"

#: rpmio/rpmio.c:756
msgid "I/O error to local file"
msgstr "到本機檔案的 I/O 錯誤"

#: rpmio/rpmio.c:758
msgid "Error setting remote server to passive mode"
msgstr "設定遠端伺服器為被動模式時發生錯誤"

#: rpmio/rpmio.c:760
msgid "File not found on server"
msgstr "檔案在伺服器上找不到"

#: rpmio/rpmio.c:762
msgid "Abort in progress"
msgstr "正在進行放棄"

#: rpmio/rpmio.c:766
msgid "Unknown or unexpected error"
msgstr "不明的或非預期錯誤"

#: rpmio/rpmio.c:784
msgid "Malformed URL"
msgstr "異常的 URL"

#: rpmio/rpmio.c:1619
#, c-format
msgid "logging into %s as %s, pw %s\n"
msgstr "以 %2$s 登錄進入 %1$s，密碼 %3$s\n"

#: rpmio/rpmlog.c:59
msgid "(no error)"
msgstr "(無錯誤)"

#: rpmio/rpmlog.c:142 rpmio/rpmlog.c:143 rpmio/rpmlog.c:144
msgid "fatal error: "
msgstr "嚴重錯誤："

#: rpmio/rpmlog.c:145
msgid "error: "
msgstr "錯誤："

#: rpmio/rpmlog.c:146
msgid "warning: "
msgstr "警告："

#: rpmio/rpmlua.c:498
#, c-format
msgid "invalid syntax in lua scriptlet: %s\n"
msgstr "lua 短命令稿中無效的語法：%s\n"

#: rpmio/rpmlua.c:516
#, c-format
msgid "invalid syntax in lua script: %s\n"
msgstr "lua 命令稿中無效的語法：%s\n"

#: rpmio/rpmlua.c:521 rpmio/rpmlua.c:540
#, c-format
msgid "lua script failed: %s\n"
msgstr "lua 命令稿失敗：%s\n"

#: rpmio/rpmlua.c:535
#, c-format
msgid "invalid syntax in lua file: %s\n"
msgstr "lua 檔案中無效的語法：%s\n"

#: rpmio/rpmlua.c:688
#, c-format
msgid "lua hook failed: %s\n"
msgstr "lua 攔截失敗：%s\n"

#: rpmio/rpmmalloc.c:15
#, c-format
msgid "memory alloc (%u bytes) returned NULL.\n"
msgstr "記憶體配置 (%u 位元組) 回傳空值。\n"

#: rpmio/url.c:124
#, c-format
msgid "warning: u %p ctrl %p nrefs != 0 (%s %s)\n"
msgstr "警告：u %p 控制 %p nrefs != 0(%s %s)\n"

#: rpmio/url.c:144
#, c-format
msgid "warning: u %p data %p nrefs != 0 (%s %s)\n"
msgstr "警告：u %p 資料 %p nrefs != 0(%s %s)\n"

#: rpmio/url.c:174
#, c-format
msgid "warning: _url_cache[%d] %p nrefs(%d) != 1 (%s %s)\n"
msgstr "警告：_url_cache[%d] %p nrefs(%d) != 1(%s %s)\n"

#: rpmio/url.c:270
#, c-format
msgid "Password for %s@%s: "
msgstr "密碼用於 %s@%s："

#: rpmio/url.c:299 rpmio/url.c:325
#, c-format
msgid "error: %sport must be a number\n"
msgstr "錯誤：%sport 必須是數字\n"

#: rpmio/url.c:504
msgid "url port must be a number\n"
msgstr "網址連接埠必須是數字\n"

#: rpmio/url.c:576
#, c-format
msgid "failed to create %s: %s\n"
msgstr "建立 %s 時失敗: %s\n"

#: tools/rpmdeps.c:158
msgid "print cpuinfo(...) dependency set"
msgstr "印出 cpuinfo(...) 相依性集合"

#: tools/rpmdeps.c:160
msgid "print rpmlib(...) dependency set"
msgstr "印出 rpmlib(...) 的相依性集合"

#: tools/rpmdeps.c:162
msgid "print /etc/rpm/sysinfo dependency set"
msgstr "印出 /etc/rpm/sysinfo 相依性集合"

#: tools/rpmdeps.c:164
msgid "print getconf(...) dependency set"
msgstr "印出 getconf(...) 的相依性集合"

#: tools/rpmdeps.c:166
msgid "print soname(...) dependencies for elf files"
msgstr "印出 soname(...) 用於 elf 檔案的相依性"

#: tools/rpmdeps.c:168
msgid "print soname(...) dependencies from /etc/ld.so.cache"
msgstr "印出 soname(...) 來自 /etc/ld.so.cache 的相依性"

#: tools/rpmdeps.c:170
msgid "print uname(...) dependency set"
msgstr "印出 uname(...) 的相依性集合"

#: tools/rpmdeps.c:172
msgid "print dependency set from a command pipe"
msgstr "印出來自命令管道的相依性集合"

#: tools/rpmdeps.c:175
msgid "print perl(...) dependency set"
msgstr "印出 perl(...) 的相依性集合"

#: tools/rpmdeps.c:177
msgid "print python(...) dependency set"
msgstr "印出 python(...) 的相依性集合"

#: tools/rpmdeps.c:179
msgid "print libtool(...) dependency set"
msgstr "印出 libtool(...) 的相依性集合"

#: tools/rpmdeps.c:181
msgid "print pkgconfig(...) dependency set"
msgstr "印出 pkgconfig(...) 的相依性集合"

#: tools/rpmdeps.c:184
msgid "print pubkey(...) dependency set"
msgstr "印出 pubkey(...) 的相依性集合"

#: tools/rpmdeps.c:186
msgid "print arch(...) dependency set"
msgstr "印出 arch(...) 的相依性集合"

#: tools/rpmdeps.c:188
msgid "print file(...) dependency set"
msgstr "印出 file(...) 的相依性集合"

#: tools/rpmdeps.c:190
msgid "print soname(...) dependency set"
msgstr "印出 soname(...) 的相依性集合"

#: tools/rpmdeps.c:192
msgid "print package(...) dependency set"
msgstr "印出 package(...) 的相依性集合"

#: tools/rpmdeps.c:195
msgid "print java(...) dependency set"
msgstr "印出 java(...) 的相依性集合"

#: tools/rpmdeps.c:197
msgid "print php(...) dependency set"
msgstr "印出 php(...) 的相依性集合"

#: tools/rpmdeps.c:199
msgid "print ruby(...) dependency set"
msgstr "印出 ruby(...) 的相依性集合"

#: tools/rpmdeps.c:201
msgid "print /var/lib/dpkg Provides: dependency set"
msgstr "印出 /var/lib/dpkg Provides: 的相依性集合"

#: tools/rpmdeps.c:203
msgid "print /var/lib/dpkg Requires: dependency set"
msgstr "印出 /var/lib/dpkg Requires: 的相依性集合"

#: tools/rpmdeps.c:206
msgid "print Provides: dependency set"
msgstr "印出 Provides: 的相依性集合"

#: tools/rpmdeps.c:208
msgid "print Requires: dependency set"
msgstr "印出 Requires: 的相依性集合"

#: tools/rpmdeps.c:210
msgid "check Requires: against Provides: for dependency closure"
msgstr "檢查 Requires: 針對 Provides: 以結束相依性"